Yamaha TX-761DAB - Manuals

Getting started 3 En IN TRODUC TI ON ■ Checking the supplied accessories Check that you received all of the following parts. ■ Installing batteries in the remote control 1 Press the part and slide the battery compartment cover. 2 Insert the two supplied batteries (AAA, R03, UM-4) according to the po...

Controls and functions 4 En 1 STANDBY/ON Turns on this unit. Press this button again to set this unit to the standby mode (see page 9). In the standby mode, this unit consumes a small amount of power in order to receive infrared signals from the remote control. 2 Front panel display Displays informa...

Controls and functions 5 En IN TRODUC TI ON 1 Infrared transmitter Outputs infrared controls signals. Aim this transmitter at the component you want to operate. 2 Numeric buttons, ENTER Selects the desired preset DAB services (see page 15) or FM/AM stations (see page 23). 3 FUNCTION/FM MODE • Activa...

Controls and functions 6 En 1 FM/AM ANTENNA terminals See page 8 for connection information. 2 OUTPUT jacks See page 7 for connection information. 3 DAB ANTENNA terminal See page 8 for connection information. 4 AC IN See page 9 for connection information. 1 TUNED indicator Lights up when this unit i...

Connections 7 En PREP ARA TION ■ ANALOG OUTPUT jacks Connect the supplied audio pin cable to the ANALOG OUTPUT jacks of this unit and the analog audio input jacks of your amplifier as follows. ■ DIGITAL (DAB) OUTPUT jacks This unit is equipped with the DIGITAL (DAB) OUTPUT jacks (OPTICAL and COAXIAL...

8 En Connections Connect the supplied indoor DAB antenna to the DAB antenna terminal on the rear panel and attach the indoor DAB antenna vertically on the wall. y It is recommended that you use the tuning aid function (see page 14) when you set up the indoor DAB antenna in order to maximize DAB rece...

9 En Connections PREP ARA TION Plug the supplied AC power cable into AC IN after all other connections are complete, then plug the AC power cable into an AC wall outlet. ■ Turning on this unit Press STANDBY/ON (or POWER ) to turn on this unit. ■ Set this unit to the standby mode Press STANDBY/ON (or...

11 En DAB (Digital Audio Broadcasting) tuning TUNING Before tuning into DAB services, you must perform the automatic scanning. Press BAND on the front panel (or remote control) repeatedly to select DAB as the reception band. The DAB indicator lights up in the front panel display, and then “DAB initi...

12 En DAB (Digital Audio Broadcasting) tuning Use this feature to select the desired DAB services by browsing the DAB service registry list. Once you have performed the automatic scanning, the registry list of available services is updated automatically as long as this unit is in the DAB tuning mode...

13 En DAB (Digital Audio Broadcasting) tuning TUNING Use this feature to set the DAB functions 1 Press BAND on the front panel (or remote control) repeatedly to select DAB as the reception band. 2 Press FUNCTION on the front panel (or remote control) to activate the DAB setup menu. The last selected...

14 En DAB (Digital Audio Broadcasting) tuning ■ Tuning aid Tune aid Use this feature to adjust the positioning of the DAB antenna and this unit. It is recommended that you perform this operation when setting up this unit in order to maximize the DAB reception capability. 1 Select “Tune aid” in the D...

15 En DAB (Digital Audio Broadcasting) tuning TUNING You can use the DAB preset tuning feature to store preset DAB services in the memory. You can then recall any preset service easily by selecting the preset service number assigned to the corresponding DAB service.You can preset up to 99 DAB servic...

16 En DAB (Digital Audio Broadcasting) tuning ■ Recalling the preset DAB services 1 Press FUNCTION on the front panel (or remote control) to select “Preset tune” and then press SELECT . 2 Rotate PRESET/TUNING (or press TUNING k / n repeatedly) to select the desired preset number and then press SELEC...

17 En DAB (Digital Audio Broadcasting) tuning TUNING Use this feature to display various information about the DAB service currently being received. Press INFO/TEXT on the front panel (or remote control) repeatedly while a DAB service is currently being broadcast. Each time you press INFO/TEXT , inf...

18 En DAB (Digital Audio Broadcasting) tuning ■ Band III When you perform the local range scanning, this unit scans only within the frequencies marked with an asterisk (*) in the following table (see page 11). ■ L-Band DAB frequency information Note Frequency Channel label 174.928 MHz 5A 176.640 MHz...

FM/AM TUNING 19 En TUNING ■ Automatic tuning Automatic tuning is effective when station signals are strong and there is no interference. 1 Press BAND on the front panel (or remote control) repeatedly to select the reception band (FM/AM). 2 Press TUNING MODE (or remote control) to select “Auto tune”....

20 En FM/AM tuning Use this feature to select the desired FM radio program by program type. You can use this feature for the FM radio programs providing the Radio Data System information signals. 1 Press BAND on the front panel (or remote control) repeatedly to select “FM” as the reception band. 2 P...

21 En FM/AM tuning TUNING 4 Press SELECT on the front panel (or remote control) to confirm the selection of the program type. 5 Rotate PRESET/TUNING (or press TUNING k / n ) to start searching for the corresponding Radio Data System stations. This unit starts searching for the Radio Data System stat...

22 En FM/AM tuning ■ Manual station preset Use this feature to store the desired FM and AM stations to the preset station memory manually. 1 Tune into the desired FM/AM station. See page 19 for tuning instructions. 2 Press MEMORY on the front panel (or remote control). The preset station number flas...

23 En FM/AM tuning TUNING You can tune into any desired station simply by selecting the preset station group and under which it was stored. ■ Browsing the preset station list 1 Press BAND on the front panel (or remote control) repeatedly to select the reception band (FM/AM). 2 Press TUNING MODE on t...

24 En FM/AM tuning • Select “PROGRAM SERVICE” to display the name of the Radio Data System program currently being received. • Select “PROGRAM TYPE” to display the type of the Radio Data System program currently being received. • Select “RADIO TEXT” to display the information on the Radio Data Syste...

Troubleshooting 25 En ADDITIONAL INF O RMA T ION Refer to the table below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, turn off this unit, disconnect the power cable, and contact the nearest authorized Y...

27 En Troubleshooting ADDITIONAL INF O RMA T ION ■ General ■ Resetting the system Use this feature to set this unit to the initial factory settings. This unit also clears all preset stations and services. Press and hold FUNCTION/FM MODE on the front panel for more than 5 seconds. “Factory reset...” ...

Operating with Yamaha AV amplifier remote controls 28 En You can operate this unit by using the remote control supplied with your Yamaha AV amplifier (such as DSP-AX861SE). The remote control for the AV amplifier is designed assuming that it is used with tuners and receivers previously released. As ...

Specifications 29 En ADDITIONAL INF O RMA T ION AUDIO SECTION • Output Level/Impedance (fixed) DAB (0 dB, Full) ...................................................... 2.0 V/1.2 k Ω FM (40 kHz Dev., 1kHz) .......................................... 1.0 V/1.2 k Ω AM (30% mod., 1 kHz) .....................