Yamaha SLG130NW- Manuals

Page 4 - Main Body/Accessories

4 Main Body/Accessories After opening the packaging, please check that all the parts listed below are in-cluded. • Main body • Left frame • AC adaptor PA-D012(A), PA-130(A), PA-D09 * Product numbers may vary according to the region. Additionally, instruments sold in some countries may not be supplie...

Page 5 - Nomenclature

5 Nomenclature ● .Front ● .Rear Fingerboard Neck Saddle Tuning peg Nut Body Pickup (underneath the saddle) Controls → See page 6. Frame attachment screw 1 (Doubles as the strap pin) Left frame (Removable) Right frame (Fixed) Bridge Horn (Leg support) Frame attachment screw 2 (Doubles as the strap pi...

Page 7 - Attaching the Frame

7 When shipped from the factory, the left frame is not attached to the Silent Guitar’s main body.Before using the instrument, please properly attach the left frame using the proce-dure described below. •. After.the.frame.is.attached,.make.sure.attachment.screws.1.and.2.are.tightened.firmly..Using.th...

Page 8 - Changing Strings; the illustration below.

8 Changing Strings 1. Thread the string through the corresponding string hole on the bridge, then tie the string as shown in the illustration below. After tying the knot, pull both ends of the string to make the knot firm on the bridge. 2. Next, tie the strings to the pegs. Hold the guitar so the he...

Page 9 - Power Supply; inserted into the jack.

9 Power Supply The Silent Guitar operates either on battery power or with an AC adaptor however, it will consume more power when the reverb function is in use. For that reason, we recommend that it be powered with the supplied AC power adaptor for normal use. A l way s t u r n t h e P H O N E S O N ...

Page 10 - Connecting External Devices

10 OPEN LINE OUT AUX IN AUX VOL MIN MAX LINE OUT AUX IN PHONES DC-IN LINE OUT AUX IN AUX VOL MIN MAX Connecting External Devices Silent Guitar or Power adaptor Electric outlet •.Using.the.cord.hook Wrap the power adaptor’s cord around the cord hook (prevents cord from being unplugged). Cord hook Fro...

Page 11 - and turn the headphone ON/OFF switch to its “ON” position.

11 ■ . AUX.IN.jack • The AUX IN jack can be used to connect an external stereo signal source to the Silent Guitar. Connecting the audio output of a CD player, portable music player, etc., to the instrument allows you to play along with the external audio source. • The AUX IN jack’s signal level can ...

Page 12 - Using the Controls; guitar amplifier or powered speaker, etc.

12 Using the Controls ■ . Using.the.LINE.OUT.jack. (Using.with.a.guitar.amplifier.or.powered.speaker,.etc.) 1. Use a standard phone plug cable to connect the Silent Guitar’s LINE OUT jack to the input jack on the guitar amplifier or powered speaker, etc. When the cable’s plug is inserted into the LI...

Page 13 - Using the Soft Case; tion’s steps 2 through 4.

13 When putting the Silent Guitar into the supplied soft case, remove the left frame from the Silent Guitar, and then place in the individual parts in the case as shown in the illustration below. Placing the instrument in the soft case does not guarantee against any dam-ages to individual parts. The...

Page 14 - Specifications

14 Specifications Neck Mahogany Body Maple Fingerboard Rosewood (SLG130NW : Ebony) Bridge Rosewood Frame.Unit Maple (SLG130NW : Rosewood/Maple) Strings Nylon Guitar Strings Sensors B-BAND Connectors/Controls • AUX IN • AUX IN Level Control • LINE OUT jack (monaural) • PHONES jack (stereo) • Volume •...

Manuals:

User Manual Yamaha SLG130NW

Summary

Yamaha Manuals