Yamaha SLG100S- Manuals

6 ● Controls VOLUME control Battery compartment REVERB switch POWER lamp AUX IN jack AUX IN level control Cord hook LINE OUT jack DC-IN jack (Power adaptor connector) DC-IN 9~12V + – BASS control TREBLE control PHONES ON/OFFswitch PHONES jack OFF 1 2 OFF ON PHONES REVERB V OLUME B ASS TREBLE OPEN LI...

7 OPEN LINE OUT AUX IN AUX VOL MIN MAX THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESI...

8 Tuning Use a tuning meter, pitch pipe, tuning fork, piano, etc., and tune the open strings to the pitches shown below. • If the string’s pitch is high, loosen the string until the string’s pitch is slightly lower than the tuning pitch, then tune while raising the string’s pitch. 1F 2F 3F 4F 5F 1. ...

9 Power Supply The Silent Guitar operates either on battery power or with an AC adaptor however, it will consume more power when the reverb function is in use. For that reason, we recommend that it be powered with the supplied AC power adaptor for normal use. Always turn the PHONES ON/OFF switch OFF...

10 Using the Controls ■ Using the LINE OUT jack (Using with a guitar amplifier or powered speaker, etc.) 1. Use a standard phone plug cable to connect the Silent Guitar’s LINE OUT jack to the input jack on theguitar amplifier or powered speaker, etc.When the cable’s plug is inserted into the LINE OU...

11 When putting the Silent Guitar into the supplied soft case, remove the left frame from the Silent Guitar, and then place in the individual parts in the case as shown in the illustration below. • Put the left frame into the case’s larger pocket. • Put the power adaptor into the smaller pocket in t...

12 OPEN LINE OUT AUX IN AUX VOL MIN MAX 3 LINE OUT AUX IN AUX VOL MIN MAX LINE OUT AUX IN PHONES DC-IN THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INT...

13 ■ AUX IN jack • The AUX IN jack can be used to connect an external stereo signal source to the Silent Guitar. Connecting the audio output of a CD player, cassette player, etc. to the instrument allows you to play along with the external audio source. • The AUX IN jack’s signal level can be contro...

14 Specifications Neck Mahogany Body Maple Fingerboard Rosewood Bridge Rosewood Frame Unit Maple Strings Steel Strings for Acoustic Guitar Sensors LR-Baggs Connectors/Controls • AUX IN • AUX IN Level Control • LINE OUT jack (monaural) • PHONES jack (stereo) • Volume • BASS control • TREBLE control •...