Page 2 - English; PRECAUTIONS; WARNING; CAUTION; NOTICE
2 RS502 Owner’s Manual English Before using, please read this assembly manual, and use this product in a safe and proper manner. * Please keep this manual in a safe place for future reference. PRECAUTIONS WARNING If this symbol is ignored and the equipment is used improperly, fatal injury to persons...
Page 3 - Package Contents
3 RS502 Owner’s Manual After opening up the package containing your electronic drum rack, please verify that all of the follow-ing components are present. Package Contents Main frame (x1) Left arm (x1) Right arm (x1) Left leg (x1) Right leg (x1) Tom holder (x3) Cymbal holder (x2) Snare holder (x1) O...
Page 5 - Assembling the Rack; NOTE
5 RS502 Owner’s Manual 1. Lay the main frame down on a solid, level surface and loosen the screws in clamps q and w using the tuning key. 2. Loosen the bolts on clamps q , w , and e and move the clamps all the way down to the center strut. Following this, lightly tighten the clamp bolts. 3. Take the...
Page 8 - Securely tighten the bolts on clamps
8 RS502 Owner’s Manual 13. Lift up the main frame and open up the left arm, the right arm, and the snare arm. 14. Securely tighten the bolts on clamps q , w , and e . 15. Check all bolts and screws once again and ensure that they are tightly fastened. CAUTION Do not open up the rack’s left and right...
Page 9 - Attaching the Holders
9 RS502 Owner’s Manual 1. Loosen the bolts on the following seven clamps ( A to G ) and rotate or move the clamps to the positions shown below. Following this, securely tighten all of the bolts to lock the clamps in place. • One snare clamp ( A ) • Three tom clamps ( B , C , and D ) • Two cymbal cla...
Page 11 - Attach the snare holder to the snare clamp.; The rack is unstable even though placed on a level surface.; Troubleshooting; Specifications
11 RS502 Owner’s Manual 4. Attach the snare holder to the snare clamp. 4-1. Loosen the bolt on the snare clamp. 4-2. Insert the snare holder. 4-3. Securely tighten the bolt on the snare clamp. The rack is unstable even though placed on a level surface. Check whether the arrow stickers are lined up...