Yamaha Rio1608-D - Manuals

R Remote Operation Manual 6 Connect the computer and R series units Use an Ethernet cable to connect the computer and the R series units. If you selected DAISY CHAIN in “ Settings on the R series units " on the previous page, connect the Dante connectors of the R series units in a daisy chain to...

R Remote Operation Manual 9 ■ Operating R Remote When you start R Remote, the "Network Setup" dialog box may appear, allowing you to select the computer's network card that will be used for communication with the R series units. If this appears, click the network card that is connected to th...

R Remote Operation Manual 10 Main screen Here you can make settings for the HA of the R series units. ① Display select buttons Click one of these buttons to view the corresponding R series unit at the right. Up to two instances of R Remote can be simultaneously connected to an R series unit. For exa...

R Remote Operation Manual 12 “I/O Device Edit” dialog box Here you can view and edit detailed HA settings for the R series unit. This appears when you click a connector index in the main screen. The toolbar also shows the UNIT ID of the R series unit. To close the dialog box, click the [x] button lo...

R Remote Operation Manual 13 “Network Setup” dialog box Here you can select the network interface card of the computer that will be used to communicate with the R series (subsequently called “the network card”). ① Network card list Select the network card that will be used to communicate with R seri...

R Remote Operation Manual 14 “R Series Information” dialog box This displays information about the R series units that are connected. Here you can also change the connection status of each R series unit. ① [ID] list Click the UNIT ID of the R series unit whose information you want to view. ② [Inform...

R Remote Operation Manual 15 ■ Uninstalling the software(Removing the application) Use “Control Panel” to uninstall the software. In Control Panel, click [Programs and functions] or [Uninstall a program], then select the item you want to uninstall, and click [Uninstall or change]. A dialog box will ...

R Remote Operation Manual 16 ■ Troubleshooting Problem Possible cause Action R series unit is not detected The R series unit's power switch is not on Turn the power switch on. The R series unit's DIP switch settings are incorrect Make the same settings as shown in one of the DIP switch setting examp...