Page 5 - English; Contents; Accessories
English Owner’s Manual 5 Contents PRECAUTIONS................................... 6 Introduction .................................... 8 Features ............................................................. 8Firmware Updates .............................................. 8Precautions for Rack Mountin...
Page 6 - PRECAUTIONS; PLEASE READ CAREFULLY BEFORE PROCEEDING; * Please keep this manual in a safe place for future reference.
Owner’s Manual 6 PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING * Please keep this manual in a safe place for future reference. WARNING Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, fir...
Page 7 - NOTICE
English Owner’s Manual 7 NOTICE To avoid the possibility of malfunction/ damage to the product, damage to data, or damage to other property, follow the notices below. • Do not use the device in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices. Otherwise, the dev...
Page 8 - Introduction; Features; Firmware Updates; Precautions for Rack Mounting
Introduction Owner’s Manual 8 Introduction Thank you for choosing the Yamaha Input Rack Ri8-D/Output Rack Ro8-D. The Ri8-D is a Dante-compatible input rack equipped with 8 channels analog input. The Ro8-D is a Dante-compatible output rack equipped with 8 channels analog output.To take full advantage...
Page 9 - About Dante
English About Dante Owner’s Manual 9 About Dante This product features Dante technology as a protocol to transmit audio signals. Dante is a network protocol developed by Audinate. It is designed to deliver multi-channel audio signals at various sampling and bit rates, as well as device control signa...
Page 10 - Controls and Functions; Front Panel
Controls and Functions Owner’s Manual 10 Controls and Functions Front Panel 1 [INPUT] Connectors 1–8 (Ri8-D only) These are the XLR-3-31 type analog balanced connectors for the input channels. The input level range is from –62 dBu to +10 dBu. +48V phantom power can be supplied to devices that requir...
Page 13 - Rear Panel
English Rear Panel Owner’s Manual 13 Rear Panel C AC IN Connector Connect the supplied AC power cord here. First, connect the power cord to the device, then insert the power cord plug into the AC outlet.The supplied power cord features a special latching mechanism (V-LOCK) to prevent the power cord ...
Page 14 - About Connections; Daisy Chain Network; About Redundant Networks
About Connections Owner’s Manual 14 About Connections There are two ways to connect the Ri8-D/Ro8-D to a Dante network. NOTE A daisy chain connection is suitable for a simple system w ith a small number of devices. Use a star net w ork if a large number of devices are connected. Daisy Chain Network ...
Page 15 - About Dante Controller
English About Dante Controller Owner’s Manual 15 About Dante Controller Dante Controller is a software application that allows configuration and audio routing of Dante networks. Use this application if you plan to connect or set up Dante-enabled devices that do not feature Ri8-D/Ro8-D-native support...
Page 16 - Head Amp Control; Setting the DIP Switches; Setting the UNIT ID
Head Amp Control Owner’s Manual 16 Head Amp Control The Ri8-D head amplifiers can be remotely controlled from a host device, such as a compatible Yamaha digital mixing console. Control from an Ri8-D-native Device The Ri8-D head amplifiers can be controlled remotely from an Ri8-D-native digital mixin...
Page 17 - Troubleshooting
English Troubleshooting Owner’s Manual 17 Troubleshooting Troubleshooting Symptom Cause Possible Solution The po w er w on’t turn on. The po w er indicator doesn’t light. The po w er cable is connected improperly. Connect the po w er cable properly (see page 13). The [POWER] s w itch is not turned O...
Page 18 - Messages; Error Messages
Troubleshooting Owner’s Manual 18 Messages Errors, warnings, and certain other types of information are displayed via the Ri8-D/Ro8-D front panel indicators. Messages are also displayed in the Dante Controller Error Status field.Each indicator lights or flashes as described below: Error Messages If ...
Page 19 - Warning Messages
English Messages Owner’s Manual 19 Warning Messages The indicators will light and/or flash as shown until the cause is resolved.If the green [SYNC] indicator is unlit, the unit’s clock is unconfirmed. If the green indicator is flashing, the unit is the clock master.If the green indicator is lit, the...
Page 20 - MEMO
Page 21 - Specifications; General Specifications
English Deutsch Français Español Português Italiano Ру сский Ё᭛ 日本 語 Specifications Owner’s Manual 153 Specifications General Specifications Sampling Frequency External 44.1kHz+4.1667%, +0.1%, –0.1%, –4.0% ±200ppm 48kHz+4.1667%, +0.1%, –0.1%, –4.0% ±200ppm 88.2kHz+4.1667%, +0.1%, –0.1%, –4.0% ±200pp...
Page 22 - Digital I/O Characteristics
Specifications Owner’s Manual 154 Analog Input Characteristics (Ri8-D only) *1. XLR-3-31 type connectors are balanced.(1=GND, 2=HOT, 3=COLD)* In these specifications, 0dBu = 0.775 Vrms.* All input AD converters are 24bit linear, 128times oversampling.* +48V DC ( phantom power ) is supplied to INPUT ...
Page 23 - Dimensions
English Deutsch Français Español Português Italiano Ру сский Ё᭛ 日本 語 Dimensions Owner’s Manual 155 Dimensions Ri8-D Ro8-D Unit: mm 480 44 430 351 354.2 362 7.8 5.8 480 430 351 354.2 359 2.3 4.3 44
Page 26 - Փ⫼䇈ᯢк
Published 12/2016 改版 IPHD-F0 © 2012 Yamaha Corporation Manual Development Group Printed in China Yamaha Downloads http://download.yamaha.com/ Yamaha Pro Audio global website http://www.yamahaproaudio.com/ Փ⫼䇈ᯢк ZX71430 1818 2 4000517700 http://www.yamaha.com.cn