Yamaha QL5 - Manuals - manualsarea.com

Page 2 - Contents

Owner’s Manual 2 Contents PRECAUTIONS................................... 5 Introduction .................................... 8 Accessories......................................................... 8About utility software ......................................... 8About firmware updates..................

Page 5 - PRECAUTIONS

Owner’s Manual 5 PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING Please keep this manual in a safe place for future reference. WARNING Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, fire ...

Page 6 - Connections

Owner’s Manual 6 Connections • Before connecting the device to other devices, turn off the power for all devices. Before turning the power on or off for all devices, set all volume levels to minimum. Maintenance • Remove the power plug from the AC outlet when cleaning the device. Handling caution • ...

Page 7 - NOTICE; Handling and Maintenance; Information; About copyrights

Owner’s Manual 7 NOTICE To avoid the possibility of malfunction/damage to the product, damage to data, or damage to other property, follow the notices below. Handling and Maintenance • Do not use the device in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices. Ot...

Page 8 - Introduction; Accessories; About firmware updates

Introduction Owner’s Manual 8 Introduction Thank you for choosing a Yamaha QL series QL5/QL1 Digital Mixing Console. To take full advantage of the superior features and performance offered by your QL series console, and to enjoy years of trouble-free use, please read this owner’s manual carefully be...

Page 9 - Features

An overview of the QL series Owner’s Manual 9 An overview of the QL series Features QL series digital mixing consoles create high-quality, refined, live-sound environments. These consoles carry forward the digital evolution of a broad array of advanced concepts that helps to make the consoles easy a...

Page 10 - Help file downloadable to the unit; About the models

An overview of the QL series Owner’s Manual 10 I/O card and processing card expansion The rear panel provides two slots in which separately sold mini-YGDAI cards can be installed. You can add inputs and outputs by installing AD cards, DA cards, or digital I/O cards in these slots. You can also expan...

Page 11 - Controls and functions; Top panel

Controls and functions Owner’s Manual 11 Controls and functions Top panel The top panel of the QL series is divided into the following sections. 1 Channel Strip section  page 12 2 SENDS ON FADER section  page 12 3 Display section  page 13 4 Selected Channel section  page 13 5 USB connector  pag...

Page 12 - Channel Strip section; SENDS ON FADER section

Controls and functions Owner’s Manual 12 Channel Strip section 1 [SEL] key Selects the channel that will be controlled in the Channel Strip section and on the touch screen. When a channel is selected, the key LED will light.If you control an ST IN channel in the Channel Strip section, the L channel ...

Page 13 - Display section; Selected Channel section

Top panel Owner’s Manual 13 Display section This is a touch screen that you can operate by touching the surface of the screen. You can touch your finger to the screen to select menus or set parameters. Please note that you cannot operate the unit by touching multiple points simultaneously. NOTICE Ne...

Page 14 - USER DEFINED KEYS section

Controls and functions Owner’s Manual 14 USER DEFINED KEYS section USER DEFINED keys [1]–[12] Execute functions as assigned by the user (scene changes, switching the talkback or internal oscillator on/off, etc.). Make these assignments in the USER SETUP screen. FADER BANK section 1 Bank Select keys ...

Page 15 - USB connector; Front panel

Front panel Owner’s Manual 15 6 Fader Adjusts the output level of the channel.If MONITOR has been assigned, this fader adjusts the monitor output level. USB connector You can connect a USB flash drive to the USB connector to record or play audio files, and to save or load internal data.The Help file...

Page 16 - Rear panel; C D E

Controls and functions Owner’s Manual 16 Rear panel 1 LAMP connectors Four-pin female XLR output jacks that supply power to separately-sold gooseneck lamps (such as the Yamaha LA1L). (The QL5 includes these connectors at two locations. The QL1 includes one.) 2 OMNI OUT jacks XLR-3-32 male output jac...

Page 18 - Touch screen; Pressing the touch screen; Using the knobs on the top panel; On-screen user interface; USER DEFINED KEY SETUP window

Touch screen Owner’s Manual 18 Touch screen Basic touch screen operations This section explains the basic procedures you can perform on the QL’s touch screen. Pressing the touch screen You will mainly use this operation to switch screens and pages, to select parameters to be operated, and to turn bu...

Page 19 - Keyboard window; Dialog boxes

On-screen user interface Owner’s Manual 19 Keyboard window Displayed when you need to assign a name or comment to a scene or library, or when you need to assign a channel name. Press characters in the window to enter the desired characters. HPF/EQ window When you press a button or field for a specif...

Page 20 - Viewing the touch screen

Touch screen Owner’s Manual 20 Viewing the touch screen The touch screen of the QL series is broadly divided into two areas. Function access area 1 Selected channel This shows the number, name, icon, and channel color of the channel that is currently selected for operation. Pressing the minus indica...

Page 21 - Main area; Using the tool buttons

Using the tool buttons Owner’s Manual 21 When you press a button ( 7 – 0 , B – D ) to access the corresponding screen, the button will be highlighted. In this state, pressing the button once again will return either to the most recently recalled SELECTED CHANNEL VIEW screen or the OVERVIEW screen. M...

Page 22 - Custom fader bank settings

Basic operation of the QL series Owner’s Manual 22 Basic operation of the QL series This section explains the basic operations of the QL series.QL series operations are divided into two main categories. In general, you will operate the QL series for mixing using a combination of these operations. • ...

Page 23 - Assigning a name

Assigning a name Owner’s Manual 23 6. To assign channels to other faders, repeat step 5. 7. When you have finished, press the X symbol in the upper right corner of the screen, and press the SETUP button again to return to the SELECT CHANNEL VIEW screen. Adjusting the send level to a MIX bus or MATRI...

Page 24 - Using libraries

Basic operation of the QL series Owner’s Manual 24 2. Press the keyboard window in the touch screen to enter the desired characters. While entering characters, you can use the following buttons in the keyboard window. • COPY button Copies the string of characters that are selected (highlighted) in t...

Page 28 - Initializing settings

Basic operation of the QL series Owner’s Manual 28 Initializing settings Here’s how you can return the EQ/dynamics settings of the currently selected channel or the effect settings of a rack to their initial state. GEQ settings can be initialized using the FLAT button in the screen. 1. Access a wind...

Page 30 - Connection; About network connections; About Dante; About Dante Controller; Connecting to I/O devices; Daisy chain network

Connection Owner’s Manual 30 Connection About network connections About Dante This product features Dante technology as a protocol to transmit audio signals. Dante is a network protocol developed by Audinate. It is designed to deliver multi-channel audio signals at various sampling and bit rates, as...

Page 32 - Analog input connections

Connection Owner’s Manual 32 Audio input/output connections Analog input connections INPUT jacks on the console and I/O devices are used mainly to connect microphones or monaural line-level devices. Analog output connections To the OMNI OUT jacks on the QL series and the OUTPUT jacks on I/O devices,...

Page 33 - Digital input/output connections; Installing an optional card

Installing an optional card Owner’s Manual 33 Port-to-port function The port-to-port function enables direct patching between input ports and output ports. With this function, the QL analog inputs and outputs can be directly routed to/from external Dante devices without passing through the mixing ch...

Page 34 - Quick Guide; Connecting the devices; Setting up the Dante network; Connecting an I/O device; Setting the word clock

Quick Guide Owner’s Manual 34 Quick Guide This section explains the general procedures in a mixing work flow. The example below is based on a system in which one QL5, one I/O device, an amplifier and speakers are connected. If there are multiple methods to achieve the same result, this section descr...

Page 35 - Patching the input port; Setting the input channels; Adjusting the analog gain

Setting the input channels Owner’s Manual 35 Patching the input port 1. Press the I/O DEVICE button in the touch screen. 2. Press the DANTE PATCH tab in the upper part of the I/O DEVICE screen. 3. Press the DANTE INPUT PATCH button in the I/O DEVICE screen. 4. Press the AUTO SETUP button. 5. When a ...

Page 36 - Applying EQ

Quick Guide Owner’s Manual 36 4. Adjust the gain level for other channels in the same way, by pressing their [SEL] and [CUE] keys, and then rotating the [GAIN] knobs. 5. After adjustment is complete, switch the [CUE] key off (the key LED turns off). Sending an input channel signal to the STEREO bus ...

Page 37 - Applying dynamics; Setting the output channels

Setting the output channels Owner’s Manual 37 Applying dynamics 1. Press the [SEL] key of the channel that you want to control. 2. Press any one of the knobs in the Selected Channel section, to return to the SELECTED CHANNEL VIEW screen. 3. Press the ON button for DYNAMICS 1 in the touch screen. 4. ...

Page 38 - Using Automixer; Using EFFECT RACK with send/return

Quick Guide Owner’s Manual 38 Using Automixer 1. Press the RACK button in the touch screen. 2. Press the GEQ tab. 3. Press the rack mount button in the VIRTUAL RACK screen. 4. Press the 8ch Automixer button in the RACK MOUNTER screen. 5. Press the INPUT PATCH button for GEQ1. 6. Select an input sour...

Page 39 - Inserting PREMIUM RACK processors

Applying effects Owner’s Manual 39 6. Select an effect you want to use from the EFFECT TYPE window. 7. In the Fader Bank section, press the Bank Select key for the Effect Send channel selected in step 3. 8. Press the [SEL] key for the channel used for Effect Send in the Channel Strip section. 9. Use...

Page 40 - Changing the patch settings; Setting up INSERT or DIRECT OUT

Quick Guide Owner’s Manual 40 8. In the Channel Strip section, select the bank that includes the channel for the premium rack you want to use. 9. Press the [SEL] key of the channel for the premium rack you want to use. 10. Press the RACK EDIT button in the INSERT field in the SELECTED CHANNEL VIEW s...

Page 41 - Grouping and linking; Creating a channel link; Setting a DCA or MUTE group; Using talkback

Grouping and linking Owner’s Manual 41 4. Press the output channel select button to select the output channel for which you want to change the port. Grouping and linking Creating a channel link 1. Press the CH JOB button in the touch screen. 2. Press the CH LINK button. 3. Select the bank that conta...

Page 42 - Using scene memories; Storing a scene; Recalling a scene

Quick Guide Owner’s Manual 42 Routing the oscillator to an output channel 1. Press the MONITOR button in the touch screen. 2. Press the OSCILLATOR display button. 3. Set the MODE, LEVEL, and FREQ (frequency) parameters in the OSCILLATOR screen. 4. Press the desired OUTPUT tab to select the output de...

Page 43 - Recording to USB flash drive

Recording and playing audio using a USB flash drive Owner’s Manual 43 Recording and playing audio using a USB flash drive Recording to USB flash drive 1. Connect a USB flash drive to the USB connector of the QL unit. 2. Press the RECORDER button in the touch screen. 3. Press the USB tab. 4. Press th...

Page 45 - Other functions

Other functions Owner’s Manual 45 Other functions Adjusting the brightness of the touch screen, lamps, and other indicators This operation lets you adjust the brightness of the touch screen, top panel LEDs, channel name displays, and lamps connected to the rear panel LAMP connectors. 1. In the funct...

Page 48 - Troubleshooting

Troubleshooting Owner’s Manual 48 Troubleshooting A FAQ section is available on the Yamaha Pro Audio site. http://www.yamahaproaudio.com/ Power does not turn on; panel LEDs and the LCD display do not light.  Is the QL ’ s power switch turned on?  Is the power cable connected to a proper AC outlet?...

Page 51 - General specifications

General specifications Owner’s Manual 51 General specifications *1. A 22kHz, 30dB/Oct filter is used to measure crosstalk.*2. For more information about Mini-YGDAI card support, refer to the Yamaha pro audio website. http://www.yamahaproaudio.com/ *3. An 80kHz, 18dB/Oct filter is used to measure tot...

Page 52 - Dimensional Diagrams

Dimensional Diagrams Owner’s Manual 52 Dimensional Diagrams 19 828.4 272 563 QL5 468 272 562 19 QL1 Units: mm

Page 53 - Index

Index Owner’s Manual 53 Index Top panel USB connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 USB flash drive Load (unit settings) . . . . . . . . . . . . . . . . . . . . . . . . . 44 Save (unit settings) . . . . . . . . . . . . . . . . . . . . . . . . . 44 A About Dante Control...

Page 55 - Block Diagram

Block Diagram 4 3 2 1 4 3 2 1 2 POST ON INSE RT OUT EF F ECT RACK IN PATCH 64{32} CASCADE IN SE LE CT SLOT1 1-16SLOT2 1-16 ATT Keyin Self PRE EQ Self POST EQ MIX13-16 OUT CH[1-8,9-16,17-24,25-32,33-40,41-48, 49-56, 57-64,ST IN 1L-8R]POST E Q(QL5) CH[1-8,9-16,17-24,25-32,ST IN 1L-8R]POST E Q(QL1) ON ...

Page 56 - Level Diagram

Level Diagram DA Max. DSP Noise Floor AD Max. Output 01 2 3 4 56 78 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 3031 32 33 Digital Bit 34 35 36 0 -10 -20 -30 -40 -50 -60 -70 -80 -90 -100 -110 -120 -130 -140 -150 -160 -170 -190 -200 -210 GAIN dBu Analog dBFS -180 [0dBu = 0.775Vrms][...