Yamaha PDM-4210E - Manuals

7 ENGLISH PRECAUTIONS • Please read this User's Manual thoroughly, especially the "CAUTION:READ THIS BEFORE OPERATING YOUR UNIT." and the "PRECAUTIONS" sections. Mis-use may cause damage to your plasma monitor, which could shorten its lifespan, or cause injury to yourself. Should you...

8 Caution when moving the main unit • As this product is heavy, whenever it is moved, two people are required to transport it safely. • Whenever the unit is moved it should be lifted forwards using the two handgrips at the back, and the unit shouldthen be held at the base on both sides for stability...

AV1 AV2 RGB 1 RGB 2 AV3 MUTE VOL VOL AV4 AUTO PinP OK SIZE RECALL MENU ID ID SET 9 ENGLISH Remote control ID SET button 16 POWER OFF button 13 POWER ON button 13 POWER ON/OFF button 13 MENU button 16 MUTE button 14 VOLUME UP/DOWN buttons 14 RETURN button 16 RECALL button 15 AUTO button 16 PinP butto...

10 Anti-tumble measures Securing to a wall or pillar Use a commercially available cord or chain, and a clamp to secure the set to a firm wall or pillar. Securing to desktop 1) Using wood screws (two), fasten the set to the clamping screw holes on the rear of the pedestal as shown.2) Using commercial...

11 ENGLISH Read CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. and PRECAUTIONS ( to )carefully to ensure maximum safety before proceeding to these steps: • Choose a safe level location to install the product. • Install the monitor to have ready access to a power socket available. • Make sure that th...

12 ① Connect the power cord to this device. ➁ Connect the power cord plug to the power outlet. (The type of plug is different from this drawing for some countries.) Connect the power cord after completing all other connections. EUROPE U.K. ONLY 1 2 1 2 INSTALLATION INSTRUCTIONS (continued) Power Cor...

13 ENGLISH OPERATING INSTRUCTIONS Turning Power On and Off • To turn the monitor power on, press the main powerswitch on the monitor main unit to ON, and then pressthe SUB POWER button or the ON/OFF or ON button onthe remote control. • To turn the monitor power off, press the SUB POWERbutton or the ...

14 AV1 AV2 RGB 1 RGB 2 AV3 MUTE VOL VOL AV4 AUTO PinP OK SIZE RECALL MENU ID ID SET OPERATING INSTRUCTIONS (continued) Audio Mute The audio volume can be temporarily muted by pressingthe MUTE button of the remote control. • When a button is pressed, the volume adjustment status guide (magenta) will ...

15 ENGLISH Size Switching Each time the SIZE button of the remote control or the monitor is pressed, the screen display area will change insequence and the status will be displayed at the bottom of the screen. * Real mode gives an image of the same shape as it is displayed on a computer monitor. Thi...

16 AV1 AV2 RGB 1 RGB 2 AV3 MUTE VOL VOL AV4 AUTO PinP OK SIZE RECALL MENU ID ID SET ID SET button ID button AUTO button Using the Menu Screen (On-screen display system) When the MENU button is pressed, the adjustment menuscreen will be displayed; from there, PC signaladjustment and setting is possib...

17 ENGLISH PICTURE MENU Picture Audio Timer Function Setup Language Select OK Set Picture Contrast : + 31 Brightness : – 31 Colour : 0 Hue : + 31 Picture Enhancement : Off Colour Temperature : Normal Colour Temp.Adjust Reset Reset Select Set Return OK Picture Contrast : + 31 Brightness : – 31 Colour...

18 Selected characters Setup hint Audio Mode Movie Music Speech Favourite Movie: This selects the audio mode suitable for Movies.Music: This selects the audio mode suitable for Music.Speech: This selects the audio mode suitable for News, Talk showetc.Favourite: This mode should be adjusted to suit y...

19 ENGLISH Picture Audio Timer Function Setup Language Select OK Set Function Screen Saver Off Screen Wipe On 60Min. Black Side Panel Off Video Power Save Off Freeze Mode Split Default Zoom Panoramic Reset Reset Select Set Return OK MENU FUNCTION MENU Function Panel Life Normal Mode Display Off ID N...

20 Selected characters Setup hint Auto Adjust* (Menu) (Adjust) Press the OK button to startautomatic regulation. Horizontal Position, Vertical Position, Horizontal Clock and ClockPhase are adjusted automatically. Horizontal Position Moves the horizontal positionto left. Moves the horizontal position...

21 ENGLISH LANGUAGE MENU Picture Audio Timer Function Setup Language Select OK Set Language English Français Deutsch Español Italiano Norsk Svenska Select Return Exit OK MENU Select a language using the ▼ ▲ SELECT buttons and press the OK button. OTHER FEATURES Automatic Store Approximately 1 sec. a...

22 Signal Check Status Display Action When Mode Display is set to ON,the input signal is switched orwhen the RECALL button ispressed. A guide is displayed for the inputterminal and the horizontal andvertical sync frequency. When the sync signal is no longerdetected. • A guide displays No Sync. Signa...

23 ENGLISH NOTES About screen defects • High precision technology is used in the making of plasma display panel but there may be dark spots (points that do not illuminate) and bright spots (points that are too bright) in some cases. These do not indicate a malfunction. About residual images • In som...

24 Symptoms That Appear to be Failures Make the checks suggested below depending on the symptoms observed. If the symptoms remain uncorrected, contact your dealer. TROUBLESHOOTING CAUTION Customer servicing can be hazardous. See page 28 11 11 13 12 29 26 26 9 16 11 17 20 20 Symptom • No picture with...

25 ENGLISH Symptom Point to check See page • The temperature of the display panel surface is high. • Plasma display panel is lighting the phosphors in the display panel by the discharge of internal radiation. In some cases, this maycause the temperature of the panel surface to increase. Pleasenote t...

26 Depending on the kind of system equipment used, images may not be displayed normally. In this case, make theadjustments suggested below. (only for RGB2) Actions to Correct Abnormal Displays (continued) Symptom 1 Text displayed across the screen appears vertically streaked, with some characters bl...

27 ENGLISH Product specifications and designs are subject to change without notice. PRODUCT SPECIFICATIONS • The monitor takes at least 30 minutes to attain optimal picture quality. Signal Input RGB terminal (D-sub 15-pin connector) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 • When different kinds of input...

28 Signal Input (continued) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 PRODUCT SPECIFICATIONS (continued) DVI terminal (DVI-D) Pin Input signal Pin Input signal 1 T.M.D.S. Data2- 14 +5V Power 2 T.M.D.S. Data2+ 15 Ground (for+5V) 3 T.M.D.S. Data2/4 Shield 16 Hot Plug Detect 4 T.M....

29 ENGLISH • The type of video board or connecting cable used may not allow for correct display adjustment of Horizontal Position, Vertical Position, Horizontal Clock and Clock Phase. • The monitor may fail to display an animation image correctly when a signal having a vertical frequency of 85Hz or ...

30 SUPPLEMENT 012̲PDM-4210̲G̲ENG    2003.12.24  01:16    ページ  30        (ブラック 版)

31 ENGLISH Monitor rear panel Speaker (R) Speaker (L) Powercord EUROPE U.K. ONLY Optional Video Unit Function Additional functions when the optional video unit is installed are as follows: ( ) Use if the video equipment has an S video input terminal To RGB,video and audioinput terminals To SCARTterm...

32 OPERATING INSTRUCTIONS Input Switching AV1 AV2 RGB 1 RGB 2 AV3 MUTE VOL VOL AV4 AUTO PinP OK SIZE RECALL MENU • Input can be switched by pressing the AV1, AV2, AV3,AV4, RGB1 or RGB2 buttons of the remote control. • Input can be switched in the sequence of AV1 ➔ AV2 ➔ AV3 ➔ AV4 ➔ RGB1 ➔ RGB2 by pr...

33 ENGLISH ATTENTION Using a wide-screen monitor • This monitor has a screen mode selection feature. If an incompatible screen mode is selected to play certain software, such as a TV program, the image will appear different from the original. Take this into consideration when making screen mode choi...

34 OPERATING INSTRUCTIONS (continued) Displaying MULTI PICTURE If the PinP button on the remote control is pressedMULTI PICTURE will display. Activating the P-in-P mode from the RGB input screen Pressing the PinP button once will display 2 pictures. • This mode can be available from RGB1(DVI-PC) and...

38 OPERATING INSTRUCTIONS (continued) SETUP MENU Picture Audio Timer Function Setup Language Select OK Set Setup System System 1 Colour System Video Input Audio Input Scart Output Monitor RGB1 DVI-STB RGB2 Component HDTV Select Set Return OK Setup System System 1 Colour System Video Input Audio Inpu...

39 ENGLISH Selected characters Setup hint Audio Input AV1 Stereo L/Mono This should correspond to the audio signal from the equipment that isconnected to the AV1 audio input terminal. If the signal is monaural audio,set this to L/Mono. AV2 (Same to AV1) AV3 AV4 Scart Output Not Available (grayed out...

40 Panel Net dimensions(excluding pedestal) Net weight(excluding pedestal) Ambientconditions Displaydimensions Resolution Temperature Relative humidity Input signals Input terminals Video signals Sync signals Power supply Power consumption/at standby Audio output (RGB input) Approx. 42 inches (922 (...

41 ENGLISH Signal Input 1 2 3 4 S-input connector pin specifications Pin Input signal 1 Y 2 Y-GND 3 C 4 C-GND Frame GND 20 18 16 14 12 10 8 6 4 2 21 19 17 15 13 11 9 7 5 3 1 Scart connector pin specifications Pin Signal Pin Signal 1 AUDIO OUT (RIGHT) 12 Not Used 2 AUDIO IN (RIGHT) 13 RGB-R GND 3 AUD...

43 ENGLISH Optional Tuner Unit Function The optional tuner unit works when installed with the optional video unit.Additional functions when the optional tuner unit is installed are as follows: ( ) COMPONENT NAMES Remote control (provided for the optional tuner unit) POWER ON / OFF button PICTURE MOD...

46 Monitor rear panel Speaker (R) Speaker (L) 20 18 16 14 12 10 8 6 4 2 21 19 17 15 13 11 9 7 5 3 1 antenna EUROPE U.K. ONLY Make sure that the power switch of the monitor is turned off. INSTALLATION INSTRUCTIONS Connecting Antenna Precautions when connecting the antenna • Please use a coaxial cable...

47 ENGLISH OPERATING INSTRUCTIONS D / N A / B i + MENU OK FREEZE ZOOM AV1 RGB1 RGB2 AV2 AV3 AV4 2-4-12 I / II P+ P- + - D V D 1 2 3 4 5 6 7 8 0 9 POWER ON/OFF button • Input can be switched by pressing the AV1, AV2, AV3,AV4, RGB1 or RGB2 buttons of the remote control. Andthe way to return to a TV ch...

48 OPERATING INSTRUCTIONS (continued) RECALL button MULTI PICTUREbutton SELECT buttons Activating the Split mode from the TV screen Pressing the MULTI PICTURE button one time will display 2 pictures. • The speaker icon can be shifted left and right by pressing the A/B button; the audio will be outpu...

49 ENGLISH Input Signal Screen Display The TV channel status can be displayed on the screen bypressing the RECALL button of the remote control. • The display will disappear in approximately 6 seconds. 1 ABCDE -- -- Min. -- -- : -- -- OFF I TV positionNameSound mode Sound system Off-timerOn-timer TV ...

50 OPERATING INSTRUCTIONS (continued) D / N A / B i + MENU OK FREEZE ZOOM AV1 RGB1 RGB2 AV2 AV3 AV4 2-4-12 I / II P+ P- + - D V D 1 2 3 4 5 6 7 8 0 9 When the FREEZE button on the remote control is pressed, the screen transfers into thefreeze mode. • There are two types of Picture Freeze mode, Split...

53 ENGLISH OTHER FUNCTIONS A2 / NICAM / Sound Multiplex • The CH I / II button is only useful for NICAM and sound multiplex signals. Otherwise pressing this button will have no effect. BILINGUAL / DUAL sound broadcast When bilingual program is received, sound mode display appears in yellow as shown ...

54 Example To operate a YAMAHA DVD player, press and hold the RECALL button, followed by the or button. OPERATING INSTRUCTIONS (continued) DVD Player Selection • You can use this remote control to operate various, brands of DVD player by pressing the following buttons on the remote control simultane...

55 ENGLISH Make the checks suggested below depending on the symptoms observed. If the symptoms persist, contact your dealer. CAUTION Customer servicing can be hazardous. TROUBLESHOOTING Symptoms That Seemingly Appear to be Failures Symptom Possible reason Remedy (1) Connection of antenna cable to th...

1 FRANÇAIS Manuel Utilisateur Nous vous remercions d’avoir acheté Yamaha Moniteur Plasma Haute Définition.Avant d’utiliser votre écran, veuillez lire attentivement ce manuel afinde savoir comment opérer de manière sûre et adéquate votreécran. Veuillez conserver ce manuel dans un endroit sûr afin dep...