Yamaha PCY100 - Manuals

6 As shown in the diagram, set up your pad unit on an electronic drum rack or a standard cymbal stand (such as a Yamaha CS Series product). 1 Using a tuning key (optional), loosen the stopper’s key bolt. (See Figure 1.) 2 Remove the wing nut, the two felt pads, and the bolt cover from the cymbal hol...

7 6 Place one of the felt pads removed in Step 2 on the cymbal holder. (See Figure 5.) 7 Mount the pad unit on the cymbal stand. Lower the pad unit into place with the cymbal holder’s shaft passing through the central hole of the Cup section. When mounted, the stopper’s pin should rest inside the pa...

8 Using the stereo audio cable provided, connect the pad unit’s output to a suitable input jack on a DTX Series Drum Trigger Module. At this time, ensure that the L-shaped end of the cable is plugged into the pad unit’s OUTPUT connector. Using a small screwdriver or a similar tool, you can turn the ...

9 If you encounter any of the following difficulties when playing your PCY Series pad unit, please take the steps indicated to resolve them before ordering repairs. No Sound, Volume is Low  Is the pad connected to the correct input number of the DTX Series Drum Trigger Module using the supplied ste...

6 As shown in the diagram, set up your pad unit on an electronic drum rack or a standard cymbal stand (such as a Yamaha CS Series product). 1 Using a tuning key (optional), loosen the stopper’s key bolt. (See Figure 1.) 2 Remove the wing nut, the two felt pads, and the bolt cover from the cymbal hol...

7 6 Place one of the felt pads removed in Step 2 on the cymbal holder. (See Figure 5.) 7 Mount the pad unit on the cymbal stand. Lower the pad unit into place with the cymbal holder’s shaft passing through the central hole of the Cup section. When mounted, the stopper’s pin should rest inside the pa...

8 Using the stereo audio cable provided, connect the pad unit’s output to a suitable input jack on a DTX Series Drum Trigger Module. At this time, ensure that the L-shaped end of the cable is plugged into the pad unit’s OUTPUT connector. Using a small screwdriver or a similar tool, you can turn the ...

9 If you encounter any of the following difficulties when playing your PCY Series pad unit, please take the steps indicated to resolve them before ordering repairs. No Sound, Volume is Low  Is the pad connected to the correct input number of the DTX Series Drum Trigger Module using the supplied ste...