Yamaha NX 50 - Manuals - manualsarea.com

Page 2 - Caution: Read this before operating your unit.; WARNING

2 En To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference.1 Install this unit in a well ventilated, cool, dry, clean place – away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. 2 Locate this unit away from othe...

Page 4 - Controls and functions

4 En Controls and functions S atellite speaker (Right) (Red) (White) Bass unit S atellite speaker (Left) Operation panel Rear panel 01En_NX-B150_G.book Page 4 Tuesday, July 1, 2014 1:44 PM

Page 5 - Rear panel

5 En Engl is h See the illustration on the left page as well. ■ Operation panel 1 p (power) button/indicator When p (power) is pressed, this unit will turn on and the indicator will light white. 2 –/+ (volume) buttons Adjusts the volume.By pressing and holding, the volume changes gradually. The Loud...

Page 6 - Speaker placement/connections; Placing the speakers

6 En Place all the speakers before connections.You can also mount satellite speakers on the wall. ( ☞ page 7) Connect speaker cables, and then connect the power cable to a wall outlet. Place the satellite speaker (Left) on the left side and the satellite speaker (Right) on the right side correctly a...

Page 8 - Connecting the cables

8 En 1 Connect the speaker cables matching the plug color to the corresponding jack color. 2 Connect the supplied power cable to the AC IN jack. 3 Connect the supplied power cable to a wall outlet. 4 Connect external devices. Speaker placement/connections Connecting the cables (Right) (Left) (Red) (...

Page 9 - is; Press; AUTO STANDBY; Auto-standby function; Power; Turning on/off the power

9 En Engl is h Press p (power) to turn on/off the power. When the power is on, p (power) lights white. Use the AUTO STANDBY switch to turn on/off the function. (Default setting: ON ) ■ Auto-standby function This unit is equipped with the auto-standby function which automatically sets this unit to st...

Page 10 - connection and music playback

10 En By pairing (registering) and connecting with a Bluetooth device such as a smartphone, you can enjoy music from this unit wirelessly. Pairing is an operation to register a device (hereafter referred to as “connection device”) on this unit for communications. Pairing is required when making a Bl...

Page 11 - Play music on the connection device.; function on the connection device.

11 En Engl is h 1 Press p (power) to turn on this unit. If the most recently connected device is available, it connects to this unit automatically. In such a case, proceed to step 3. 2 Operate the connection device paired with this unit to establish a Bluetooth connection. When a Bluetooth connectio...

Page 12 - Troubleshooting

12 En Refer to the table below if this unit does not operate properly. If your problem is not listed below, or if the problem persists, turn off this unit, disconnect the power cable, and contact the nearest authorized Yamaha dealer or service center. ■ General ■ AUTO STANDBY Troubleshooting Problem...

Page 14 - AUX; Specifications are subject to change without notice.; Specifications

14 En ■ Bluetooth Bluetooth version ....................................................................................................... Ver. 3.0 Supported profile .......................................................................................................... A2DPSupported audio codec ...

Page 15 - Handling; communications

15 En Engl is h Bluetooth • Bluetooth is a technology for wireless communication between devices within an area of about 10 meters (33 ft) employing the 2.4 GHz frequency band, a band which can be used without a license. • Bluetooth is a registered trademark of the Bluetooth SIG and is used by Yamah...

Yamaha NX 50 - Manuals

Manuals:

User Manual Yamaha NX 50

Summary

Yamaha Manuals