Yamaha NUAGE- Manuals

Description of the Device NUAGE MASTER Operation Manual 5 CONTROL ROOM Section Overview This section is for operating the Control Room features. To operate it, make sure that Control Room is turned on in Nuendo and the channels you need have been created, then configure the input/output routing for ...

Description of the Device NUAGE MASTER Operation Manual 6 6 [REF] Sets the Control Room level to the Reference level. When this is on (lit), the level is reset to the Reference level. When you turn this is off (dim), the level is set back to the previous setting. The button goes dim when you change ...

Description of the Device NUAGE MASTER Operation Manual 7 Controls and Functions 1 [Display access] Calls up the “MONITOR SOURCE Page” ( page 40 ) in the [Multi function display]. 2 [EXT] Switches to the “EXT” Control Room sources. However, when [PHONES] ( page 5 ) in the CONTROL ROOM section is on,...

Description of the Device NUAGE MASTER Operation Manual 8 CUES Section Overview This section is for turning Mute of CUE 1 – CUE 4 in the Control Room on and off. To operate it, make sure that Control Room is turned on in Nuendo and the channels you need have been created, then configure the input/ou...

Description of the Device NUAGE MASTER Operation Manual 9 COMMUNICATION Section Overview This section is for using Control Room’s Talkback feature and for executing assigned functions. To operate it, make sure that Control Room is turned on in Nuendo and the channels you need have been created, then...

Description of the Device NUAGE MASTER Operation Manual 10 TRANSPORT Section Overview This section is for operating the transport functions. Controls and Functions 1 [Display access] Calls up the “TRANSPORT Page” ( page 41 ) in the [Multi function display]. When the TRANSPORT Page is shown, you can ...

Description of the Device NUAGE MASTER Operation Manual 11 # [ZAP] Recalls the memorized Project Window view, set by [MEM]. Pressing it again restores the view to the previous one. The button lights while being held down. $ [  ] (fast rewind) Operates Fast Rewind. % [  ] (fast forward) Operates ...

Description of the Device NUAGE MASTER Operation Manual 12 5 [CUT] Executes the Cut operation. The button lights while held down. 6 [COPY] Executes the Copy operation. The button lights while held down. 7 [PASTE] Executes the Paste operation. The button lights while held down. 8 [SNAP] Turns Snap on...

Description of the Device NUAGE MASTER Operation Manual 14 9 [FADE IN] Operates the Fade In function. The following steps illustrate by example. 1. Select the desired event for applying Fade In. 2. Move the Project Cursor to the desired end, and press [FADE IN] to set it to that point. 3. Set the Fa...

Description of the Device NUAGE MASTER Operation Manual 15 2 [UNDO] Executes Undo. The button lights while held down. To execute Redo, simultaneously hold down [SHIFT] ( page 15 ) in the MODIFIER section and press [UNDO]. The button lights while held down. 3 [ENTER] For fixing or executing an entere...

Description of the Device NUAGE MASTER Operation Manual 16 NUMERIC PAD Section Overview This section is for inputting various parameters by the [Input keys] — which include [0] – [9], [ENTER], [NEXT +], etc. The input parameter changes depending on the selected [Input keys] mode, all of which are li...

Description of the Device NUAGE MASTER Operation Manual 18 When the Addition function pop-up window is shown, the [Input keys] have the following functions. 2 [MARKER] Sets the [Input keys] to Marker mode. In the Marker mode, you can set the Project Cursor to the desired Marker position with the [In...

Description of the Device NUAGE MASTER Operation Manual 19 Cycle Marker Jump Function In the Cycle Marker Jump function, you can set the Project Cursor to the Cycle Marker position by inputting the Marker ID of the Cycle Marker. When you press [CYCLE .] in the Marker mode, [CYCLE .] is lit, and the ...

Description of the Device NUAGE MASTER Operation Manual 21 When the pop-up window is shown, the [Input keys] have the following functions. You can set the locator position by [SET] and [LEFT]/[RIGHT] in the TRANSPORT section. For details, refer to the description of [LEFT] ( page 10 ) in the TRANSPO...

Description of the Device NUAGE MASTER Operation Manual 22 AUTOMATION Section Overview This section is for operating Automation. The function assignments of the buttons can be changed to other Automation functions as desired. For details on changing the function assignments, see “Automation window” ...

Description of the Device NUAGE MASTER Operation Manual 24 Controls and Functions 1 [Multi function display] Displays pages for editing parameters in various sections, or pages for editing channel parameters. 2 [Multi function knob] Adjusts the various parameters. The color of the LED on the [Multi ...

Description of the Device NUAGE MASTER Operation Manual 25 TALKBACK MIC Section Overview This is a section for the talkback microphone. Controls and Functions 1 [TALKBACK microphone] Microphone for Talkback operation. The audio signal input to the [TALKBACK microphone] is output from the [TALKBACK O...

Description of the Device NUAGE MASTER Operation Manual 26 Front Panel 1 [PHONES A/B] For connection to headphones. Audio input via [TO PHONES L/R] ( page 27 ) on the rear panel is output here. 2 [LEVEL] Adjusts the output signal level of [PHONES A/B]. 1 2

Description of the Device NUAGE MASTER Operation Manual 27 Rear Panel 1 [AC IN] For connection to the power cable. 2 [RS-232C] For connection to an RS-232C cable. Connect this port to the RS-232C port on the KVM switch. When you switch between multiple DAW applications using the DAW SELECT section w...

Description of the Software Programs NUAGE MASTER Operation Manual 29 To input parameter values (which allow number input) in the page, use the Parameter mode in the NUMERIC PAD section ( page 16 ). To do this: 1. Press [PARAM] ( page 19 ) in the NUMERIC PAD section to select the Parameter mode. 2. ...

Description of the Software Programs NUAGE MASTER Operation Manual 30 • [VOLUME] (JOG WHEEL section) • [CYCLE] (TRANSPORT section) • [  ] (record) (TRANSPORT section) • [TALK BACK] (COMMUNICATION section) When you set this to off, lighting of the buttons while they are held is disabled. $ SPL dB Se...

Description of the Software Programs NUAGE MASTER Operation Manual 31 When you touch the upper left of a folder track icon, the window changes to show the contents of the folder track. In the first column, the selected folder track and a “Return” control is shown. Touching “Return” changes back to t...

Description of the Software Programs NUAGE MASTER Operation Manual 32 Solo View This view is for operating Solo or Listen for the tracks. 1 Solo Selects Solo. 2 AFL Selects Listen of AFL. 3 PFL Selects Listen of PFL. 4 Track Turns Solo or Listen on (lit) and off. You can turn Solo or Listen on/off f...

Description of the Software Programs NUAGE MASTER Operation Manual 35 CUES Page This page is for controlling the Cues of the selected channel. 1 Cue Send Level Adjusts the Cue send level. 2 Cue Send Pan Adjusts the Cue send pan. 3 On/Off Turns Cue on (lit) and off. 4 PRE Turns Pre Fader on (lit) and...

Description of the Software Programs NUAGE MASTER Operation Manual 36 INSERT Page This page is for controlling Inserts for the selected channel. 1 Insert Displays the assigned plug-in effects. When you touch this, the plug-in selection window is opened. To scroll through the window, touch “ u ” or “...

Description of the Software Programs NUAGE MASTER Operation Manual 37 AUTOMATION Page Overview This page is for controlling the Automation features. The functions of this page are the same as in the Nuendo Automation Panel. To open this page, press the AUTOMATION [Display access] button ( page 22 )....

Description of the Software Programs NUAGE MASTER Operation Manual 38 USER ASSIGNABLE Page Overview This page is used to execute assigned functions. To open this page, press the USER ASSIGNABLE [Display access] button ( page 21 ). To assign the function, configure it in “NUAGE MASTER Setup” ( page 4...

Description of the Software Programs NUAGE MASTER Operation Manual 39 3 LE Turns Listen on (lit) and off. 4 LE Level Adjusts Listen level. 5 On/Off Turns the channel on (lit) and off. 6 Level Meter Displays the channel level. 7 Level Indicator Displays the channel level. 8 Reference Level When turne...

Description of the Software Programs NUAGE MASTER Operation Manual 40 CUES Page Overview This page is for operating Cue functions in the Control Room. To open this page, press the CUES [Display access] button ( page 8 ). Controls and Functions 1 EXT Sets the source to “EXT.” 2 CUES Sets the source t...

Description of the Software Programs NUAGE MASTER Operation Manual 41 COMMUNICATION Page Overview This page is for operating the communication functions in the Control Room. To open this page, press the COMMUNICATION [Display access] button ( page 9 ). By touching “Nuendo” in the Tool area, you can ...

Description of the Software Programs NUAGE MASTER Operation Manual 43 EDIT Page Overview This page is used to execute assigned functions. To open this page, press the EDIT [Display access] button ( page 11 ). To assign the function, configure it from “EDIT window” ( page 44 ) in “NUAGE MASTER Setup....

Description of the Software Programs NUAGE MASTER Operation Manual 44 NUAGE MASTER Setup Overview This software is for configuring the general settings of Nuage Master from Nuendo. You can configure settings such as the user assignable buttons on the device or “USER ASSIGNABLE page” ( page 38 ). To ...

Description of the Software Programs NUAGE MASTER Operation Manual 45 1 Edit Settings Assigns functions to the buttons. Click “Command” to select the command. When you check the “Repeat” box for the function, the corresponding function will operate continuously by holding down the button. You can in...

Description of the Software Programs NUAGE MASTER Operation Manual 46 NUAGE Workgroup Manager Overview NUAGE Workgroup Manager is an application that allows control over devices and DAW software programs as a Workgroup on a NUAGE system. For details on NUAGE Workgroup Manager, refer to the NUAGE Wor...

Troubleshooting (in operation) NUAGE MASTER Operation Manual 47 Troubleshooting (in operation) A connection cannot be established with Pro Tools. • Ensure that the steps described in “Settings for Pro Tools” ( page 48 ) have been completed. • If using a wireless LAN adaptor, try turning it off. Valu...

Appendix NUAGE MASTER Operation Manual 48 Pro Tools Control Introduction In addition to Nuendo and Cubase, Nuage Fader and Nuage Master devices can also be used to control Pro Tools (Mac only; basic functions only). NOTE • When working with Pro Tools, up to two Nuage Faders together with an optional...

Appendix NUAGE MASTER Operation Manual 49 Button Functions CONTROL ROOM Section MONITOR SOURCE Section CUES Section COMMUNICATION Section TRANSPORT Section [Display access] These controllers are used to operate the DAW A Nuendo. *1 [REF] [SOLO CLEAR] [MUTE] [DIM] [DOWNMIX 1] – [DOWNMIX 4] [MONITOR A...