Yamaha NS AW190WH - Manuals

iii En Maintenance • Before cleaning the product, be sure to remove the power cord plug from the AC outlet.Otherwise, electrical shock may be caused. Handling • Do not touch the surface to which this label is attached. The surface may become heated during use of this product, and touching the surfac...

1 En USEFUL FEATURES............................................... 1 SUPPLIED ACCESSORIES .................................... 1 CONTROLS AND FUNCTIONS ............................ 2 Front panel .................................................................... 2Front panel display .................

2 En 1 A (power) Turns this unit on, or sets it to standby mode. 2 FM MODE Changes the FM radio wave reception mode (stereo or monaural) when TUNER is selected as the input source (see page 15). 3 Remote control sensor Receives infrared signals from the remote control. 4 STANDBY/ON indicator 5 MEMOR...

CONTROLS AND FUNCTIONS 3 En A PHONES jack For connecting headphones. y Press SPEAKERS A/B so that the SP A/B indicators (see page 4) turn off before you connect your headphones to the PHONES jack. B SPEAKERS A/B Turns on or off the speaker set connected to the SPEAKERS A and/or SPEAKERS B terminals ...

CONTROLS AND FUNCTIONS 4 En 1 PRESET indicator Lights up or blinks when using the preset function (see page 16). 2 MEMORY indicator Lights up or blinks when registering radio stations as presets (see page 16). 3 SP (SPEAKERS) A/B indicators Light up according to the set of speakers selected.Both ind...

CONTROLS AND FUNCTIONS 5 En 1 ANTENNA terminals Used to connect the radio antennas (see page 11). 2 Power cable For connecting this unit to an AC wall outlet (see page 11). 3 CD jacks Used to connect a CD player (see page 9). 4 LINE 1-2 jacks Used to connect audio components (see page 9). 5 LINE 3 j...

CONTROLS AND FUNCTIONS 6 En ■ Common controls The following parts and controls can be used no matter which input source is selected. 1 Infrared signal transmitter Sends infrared signals. 2 A (power) Turns this unit on, or sets it to standby mode. 3 SLEEP Sets the sleep timer (see page 12). 4 Input s...

CONTROLS AND FUNCTIONS 7 En ■ Radio function controls The following buttons can be used when TUNER is selected as the input source. D TUNING jj / ii Selects the tuning frequency (see page 15). PRESET j / i Selects a preset radio station (see page 17). BAND Switches the radio tuner band. MEMORY Store...

CONTROLS AND FUNCTIONS 8 En ■ Installing batteries Change all batteries if you notice the operation range of the remote control narrows. Before inserting new batteries, wipe the battery compartment clean. ■ Operation range Point the remote control at the remote control sensor on this unit and remain...

9 En Make sure to connect L (left) to L, R (right) to R, “+” to “+” and “–” to “–”. If the connections are faulty, no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be unnatural and lack bass. Refer to the owner’s manual for each of...

10 En CONNECTIONS ■ OUT jacks • The OUT jacks output audio signals of the currently selected input (except when LINE 3 is selected). • Volume level, tone control and balance settings do not affect the OUT jacks. ■ Connecting speaker cables When inserting speaker cables into the speaker terminals, in...

11 En CONNECTIONS Connect the supplied FM/AM antenna to this unit.Fix the end of the FM antenna to a wall, and place the AM antenna. • If you experience poor reception quality, install an outdoor antenna. • Unwind only the length of cable needed from the AM antenna unit. • The wires of the AM antenn...

12 En 1 Press A (power) to turn on this unit. 2 Press one of the Input selector buttons to select the desired input source. 3 Press SPEAKERS A and/or SPEAKERS B to select the desired speaker(s). y • When one set of speakers is connected using bi-wire connections, or when using two sets of speakers s...

13 En This unit provides Bluetooth functionality. You can enjoy wireless music playback from your Bluetooth device (mobile phone, digital audio player, etc.). Please also refer to the owner’s manual of your Bluetooth device. You’ll need to perform the pairing operation the first time you use your Bl...

14 En LISTENING TO MUSIC FROM YOUR Bluetooth® DEVICE Once pairing has been completed, connecting a Bluetooth will be easy the next time. ■ Connecting from the Bluetooth device 1 In the Bluetooth settings of the Bluetooth device, turn Bluetooth on. 2 From the Bluetooth connection list of the Bluetoot...

15 En You can tune in to a radio station by specifying its frequency or selecting from registered radio stations. • The radio frequencies differ depending on the country or region where this unit is being used. Front panel display illustrations shown in this section are based on Europe model. • Only...

16 En FM/AM TUNING 1 Press TUNER to select the tuner as the input source. 2 Press BAND to select the FM band. 3 Press MENU to enter the Option menu. The Option menu for TUNER is displayed (see page 19). 4 Press  /  to select “AUTO PRESET”, and then press ENTER. This unit starts scanning the FM ban...

17 En FM/AM TUNING ■ Recalling a preset station You can recall preset stations that were registered by presetting automatically or manually. 1 Press TUNER to select the tuner as the input source. 2 Press BAND to select the FM/AM band. 3 Press PRESET j / i to select a preset number. y • Preset number...

18 En FM/AM TUNING 6 Press ENTER again to confirm. “CLEARED” is displayed on the front panel display. Then, another preset station is shown on the front panel display. When there is no more preset station, “NO PRESET” is displayed, and then the display returns to the Option menu.To return the displa...

19 En The Option menu allows you to configure various settings for each input source and recall those settings automatically when an input source is selected. 1 Press one of the Input selector buttons to select the desired input source. 2 Press MENU. 3 Press  /  to select the desired menu item, an...

20 En Refer to the chart below if this unit does not function properly. If the problem you are experiencing is not listed below or if the instructions below do not help, set this unit to standby mode, disconnect the power cable, and then contact the nearest authorized Yamaha dealer or service center...

22 En TROUBLESHOOTING ■ FM reception ■ AM reception No sound is produced or the sound is interrupted during playback. The Bluetooth connection of this unit with the Bluetooth device is disconnected. Perform Bluetooth connection operations again. 13 This unit and the Bluetooth device are too far apar...

23 En AUDIO SECTION • Minimum RMS output power (8 Ω , 40 Hz to 20 kHz, 0.2% THD) [North America, General, China, Korea, Australia and Europe models] ................................................. 100 W + 100 W[Asia model] ......................................................... 85 W + 85 W • Dyn...