Yamaha MTX5-D- Manuals

MTX5-D Owner’s Manual 5 NOTICE To avoid the possibility of malfunction/ damage to the product, damage to data, or damage to other property, follow the notices below.  Handling and Maintenance • Do not use the device in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric d...

MTX5-D Owner’s Manual 6 Contents PRECAUTIONS................................................................................................................ 4 Getting Started................................................................................................................ 7 Included it...

MTX5-D Owner’s Manual 7 Getting Started Thank you for purchasing the Yamaha Matrix Processor MTX5-D. This manual will help you take full advantage of the superior functionality offered by the MTX5-D. After you have read the manual, keep it in a safe place for reference when needed. • MTX5-D Owner’s ...

MTX5-D Owner’s Manual 8 Introducing the MTX5-D • A signal processor suitable for small or mid-sized installed systems The MTX5-D is a signal processor suitable for small or mid-sized systems such as retail establishments or banquet halls. In addition to a 34 ch. x 16 ch. matrix mixer, it provides 3-...

MTX5-D Owner’s Manual 9 Controls and Connectors q SD memory card slot You can insert an SD memory card here. Music or sound effects can be played back from an SD memory card contain-ing audio files (MP3 files and WAV files). Before you insert an SD memory card into the slot, or remove an SD memory c...

Controls and Connectors MTX5-D Owner’s Manual 10 q AC IN connector Use the included power cord to supply power to this connec-tor. First, connect the power cord to this device, and then insert the power cord plug into the AC outlet. w Ground screw The supplied power cord has a three-prong plug that ...

Controls and Connectors MTX5-D Owner’s Manual 13  Euroblock plug connection Use the included Euroblock plugs when making connections to the [INPUT]/[OUTPUT] connectors and [GPI] connector. 1. Loosen the terminal screws. 2. Insert cables. 3. Securely tighten the terminal screws. Pull the cables (not...

Controls and Connectors MTX5-D Owner’s Manual 14 5. Plug the Euroblock plug into the [GPI] con- nector or [INPUT]/[OUTPUT] connector of the MTX5-D.  Installing an option card Before you install I/O cards in slots, you must check the Yamaha website to determine whether the card is compatible with th...

MTX5-D Owner’s Manual 15 About Dante This product features Dante technology as a protocol to transmit audio signals. Dante is a network pro-tocol developed by Audinate. It is designed to deliver multi-channel audio signals at various sampling and bit rates, as well as device control signals over a G...

About Dante MTX5-D Owner’s Manual 16  About redundant networks A redundant network consists of two circuits, a primary cir-cuit and a secondary circuit. Normally, the network operates on the primary circuit. However, if the primary connection is broken, the secondary circuit will automatically take...

MTX5-D Owner’s Manual 17 Quick Guide This section explains basic settings and connection procedures for constructing an MTX system using the MTX5-D. Some of the steps may not be necessary for your system; if so, proceed to the next step. Use MTX Editor to make the required settings before you actu-a...

Quick Guide MTX5-D Owner’s Manual 18 8. Make DCP settings. Assign the parameters of the MTX5-D to the switches and knobs of the connected DCP units. Here you can also spec-ify the brightness of the DCP’s LEDs. For details on how to make DCP settings, refer to “MTX Editor User’s Manual.” 9. As necess...

Quick Guide MTX5-D Owner’s Manual 19 Use MTX Editor to make adjustments for the entire system. 1. Connect the computer to the MTX5-D/XMV/ EXi8/EXo8 via a network switch. If you’re using only the MTX5-D, you can connect it directly to the computer. 2. Start up MTX Editor and load the project file tha...

MTX5-D Owner’s Manual 20 Various Procedures With the MTX system, input/output port patching, matrix mixer settings, and the parameters of XMV amps within the same MTX system are stored together as a “preset” in the MTX5-D and in MTX Editor for recall when desired.Each MTX system can store 50 presets...

Various Procedures MTX5-D Owner’s Manual 21 GPI (General Purpose Interface) devices can be connected to the rear-panel [GPI] connectors. GPI allows a variety of control signals to be exchanged with external controllers or other devices. The MTX5-D provides 16 input ports and 8 output ports. • The +5...

Various Procedures MTX5-D Owner’s Manual 22 The MTX5-D can use commercially available SD memory cards to play back audio files such as music and sound effects without needing to connect a CD player or other audio device. The MTX5-D can play back audio files in either MP3 or WAV formats. Here we expl...

Various Procedures MTX5-D Owner’s Manual 23 4. When initialization is completed, power-off the MTX5-D once again. 5. Set the rear panel DIP switches 7 and 8 to the “RESUME” position. 6. Power-on the MTX5-D again. The MTX5-D will start up in its factory-set state.

MTX5-D Owner’s Manual 24 Appendix  Troubleshooting The Yamaha Pro Audio website provides a FAQ (a list of frequently asked questions, with answers). http://www.yamahaproaudio.com/ Symptom Possible cause, and action The device does not turn on, or the panel LEDs do not light up. Connect the power co...

Appendix MTX5-D Owner’s Manual 26  Messages Warnings and certain other types of information are displayed via the MTX5-D front panel indicators.Messages are also displayed in the Dante Controller Error Status field.Each indicator lights or flashes as described below:  Information Messages The stat...

Appendix MTX5-D Owner’s Manual 27  Alert list This is a list of the alerts that may be indicated in the front panel [PRESET] display. Alert number Meaning Response 01–09 The device has not started up correctly. Turn the power off, then turn on after waiting at least 6 seconds. If this does not solv...

Appendix MTX5-D Owner’s Manual 29  Specifications * Specifications and appearance are subject to change without notice for improvement. European Models Inrush Current based on EN 55103-1: 20092A (on initial switch-on)2A (after a supply interruption of 5s)Conforms to Environments: E1, E2, E3 and E4 ...

Appendix MTX5-D Owner’s Manual 30  Input/Output Characteristics ANALOG INPUT CHARACTERISTICS • In these specifications, 0dBu = 0.775 Vrms., 0dBV = 1.00 Vrms. • All input AD converters are 24bit linear, 128times oversampling. • +48V DC (phantom power) is supplied to INPUT EUROBLOCK connectors via ea...

Appendix MTX5-D Owner’s Manual 31  Block Diagram 8 8 㻵㻺 㻼㼁㼀 㻼㻭 㼀 㻯 㻴 㻹㻭㼀㻾㻵㼄 㻾㻻 㼁㼀 㻱㻾 㻻㼁 㼀㻼㼁 㼀 㻼㻭㼀㻯㻴 16 16 16 INPUT 1-8 AD ST IN 1L- 2R AD SUM SUM SD IN L- R Mini -YGD AI DA NTE YD IF IN To P R IORITY /A M B IE NT S O U RCE To ROUTE R IN To Y D IF OU TP U T P A TCH ME TE R IN PU T ME TE R IN PU T *D...

MTX5-D Owner’s Manual 32  Index Symbols +48V ....................................................................... 12 [ s / t ] buttons ........................................................... 9 [ALERT] indicator ..................................................... 9 [DCP] connector ............