Yamaha Mobile- Manuals

5) Tap OK to confirm sending the settings. 6) The white LED will flash once on the meter, and the Send data success! pop-up message in the app confirms the data was successfully sent. 7) Close the app, turn main switch off. NOTE : Sending data from the Quick Setting screen will send all 4 MODE’s, if...

NOTES regarding suspension settings: AUTOMATIC MODE The damping adjustment ranges in A-1 and A-2 are limited to plus 5 to minus 5 steps from the preset values. The settings in A-3 cannot be changed. The Öhlins® Automatic Mode, which actively adjusts the damping as you ride, is ON in A-1, A-2 and A-3...

YRC Setting Detail Settings Screen Tapping the upper left corner displays the Detail Setting screen option; it has two areas; the top shows the 4 current saved settings from the Quick Setting screen (main screen). We do not recommend making changes to the current settings on this screen, it’s much e...

2) You can edit the YRC label, 2 nd column, if you wish. There is a 4 character maximum, letters (caps), numbers, no special characters except the dash are allowed (ex., SLIC or SL-1.) TIP This will be the label that appears on the meter assembly (instead of MODE-A, etc.) when the setting file is up...

Y-TRAC Quick Start Guide Yamaha - Telemetry Recording and Analysis Controller Features  Download log files from the CCU to your mobile device o Log files of a street ride or timed laps on a race course. (The race course must be configured in the CCU Config app to enable automatic lap timing.) o Mot...

Y-TRAC Quick Start Guide Download Procedure – from CCU to Y-TRAC  Connect the mobile device to the CCU wireless network - YAMAHA MOTOR CCU DF0010*  Tap the download icon on the main screen  App will connect to the CCU and display the available log file(s) – Figure 1  Tap the log file  Tap Downl...

Y-TRAC Quick Start Guide  The downloaded log file(s) will then appear on the main screen – Figure 3  Tap the log file – it may take 2~3 seconds for the data to load (proceed to the Log Viewer/Player section on next page) Figure 3 NOTES: 1. The serial number on the CCU unit is the password for the ...

Y-TRAC Quick Start Guide  Viewer/Player showing one selected lap 1 2 3 4 5 6 7 8 9 10 11 12 13 14

CCU Config Quick Start Guide Features  AutoLap Setting Allows you to preload and configure race courses for the automatic lap counter and lap timing function built into the CCU/GPS unit.  Logging Mode Sets the sampling rate of the Logging Mode. Usage  Logging Mode Select the desired sampling rate...

 AutoLap Setting This example shows race courses that have been previously loaded into the app. Tap the desired race course to open and upload to the CCU. Tap and hold track name to rename or delete. 1 2 Download current AutoLap course from CCU Add a new race course – see next page 1 2 3 4 5 + = ad...

CCU Config Quick Start Guide Adding a new Race Course  Add a new race course with internet-connected device (1) at the track using Google Location Service™; 1) Open the CCU Config app and select AutoLap Setting, 2) tap ‘+’ icon, 3) tap Google Location Service™ icon, a blue dot should display on the...

CCU Config Quick Start Guide  OPTIONAL Adding a new race course MANUALLY. 1) Using a personal computer (PC) search for the race track on Google Maps™. 2) Using the satellite view, zoom in on the start/finish line, right mouse click on one side of the track near the s tart/finish line and select ‘ W...

Engine Oil This full synthetic race oil is used by Yamalube-sponsored race teams on the road courses and in the dirt. Fortified with the highest amount of ester, exceeds JASO MA certification, provides smooth shifting, no clutch slippage, and quick revving. Chain Lube A high-quality synthetically ba...

See the complete line of Genuine Yamaha Accessories and Yamalube® maintenance and care products at: yamahapartsandaccessories.com This document contains many of the valuable trademarks and service marks owned and used by Yamaha throughout the world. The document may also contain references to other ...