Yamaha MGP12X - Manuals

MGP16X/MGP12X Owner’s Manual 5 • Remove the power plug from the AC outlet when cleaning the device. • Do not insert your fingers or hands in any gaps or openings on the device (vents, ports, etc.). • Avoid inserting or dropping foreign objects (paper, plastic, metal, etc.) into any gaps or openings ...

MGP16X/MGP12X Owner’s Manual 6 Making the Most of Your Mixer Balanced Cables and Unbal-anced Cables Two types of cables can be used to connect microphones, elec-tronic instruments, and other audio sources to the mixer’s inputs, as well as to connect the mixer’s outputs to a power amplifier or relate...

MGP16X/MGP12X Owner’s Manual 7 Making the Most of Your Mixer Level Adjustment for Optimum Mix Equalizer Tips The best advice that can be given regarding equalization while recording is simply to use as little equalization as possible. If you want a little more presence you can turn the HIGH end up a...

MGP16X/MGP12X Owner’s Manual 8 Setup DI Powered monitor speakers CD player Computer/Audio interface iPod/iPhone Headphones Synthesizer Exciter Portable recorder Powered speakers Powered monitor speakers (For musician monitoring) Effect processor Microphone x 2 Microphone x 4 Guitar Drum Bass Setup E...

MGP16X/MGP12X Owner’s Manual 9 Setup iPod/iPhone Headphones Computer/Audio interface DJ mixer DVD player (voice) CD player Powered speakers CH8 (for MC) * MGP12X: CH4 Power amp Speakers Instrument, Microphone 2. For Events and Parties (MGP16X) USB : iPod/iPhone signal  CH15/16 (MGP12X) USB : iPod/i...

Setup MGP16X/MGP12X Owner’s Manual 10 Rack Mounting The unit requires at least 11U* of rack space. To take into account the cable connections, we recommend to ensure at least 13U* of rack space. * 11U corresponds to about 489mm and 13U is about 578mm.  Precautions for Rack Mounting This unit is rat...

MGP16X/MGP12X Owner’s Manual 11 Setup  MGP12X 3. Prepare the included rack-mount kit (2 sup-ports and 6 screws). 4. Use the included screws to fasten the rack-mount supports with a triangular mark ( ) on the top side, to the installed rack-mount brack-ets in step 2. Fasten them to the mixer in orde...

MGP16X/MGP12X Owner’s Manual 12 Quick Start Guide We’ll begin this guide by connecting a pair of speakers and generating some stereo output. Note that the oper-ations and procedures will vary somewhat according to the input devices you are using. Step 1 Preparing the Power Sup- ply 1. Make sure that...

MGP16X/MGP12X Owner’s Manual 13 Quick Start Guide Step 4 Getting Sound to the Speakers 1. Adjust the channel GAIN controls so that the corresponding peak indicators flash briefly on the highest peak levels. NOTE To use the level meter to get an accurate reading of the incom-ing signal level, turn th...

Quick Start Guide MGP16X/MGP12X Owner’s Manual 14 Step 6 <Application> Using the Ducker function 1. Connect a music player or device for playing background music. Connect the device to CH13/14 or CH15/16 on the MGP16X, and to CH9/10 or CH11/12 on the MGP12X.To connect an iPod/iPhone, use the U...

MGP16X/MGP12X Owner’s Manual 15 Controls and Connectors Front Panel * Throughout this manual, all panel illustrations show the panel of the MGP16X. On the MGP12X, there are four channels in the mono input section (see 1 below) and 12 channels in the channel I/O connectors section (see 10 on the next...

Controls and Connectors MGP16X/MGP12X Owner’s Manual 16 Rear Panel Rear Input/Output Block 10. Channel I/O connectors section ....................... page 25 11. Master I/O connectors section .......................... page 26 12. Power section ................................................... pag...

MGP16X/MGP12X Owner’s Manual 17 Controls and Connectors Where Your Signal Goes Once It’s Inside the Box The purpose of configuring an audio system around a mixer is to collect signals from all channels and mix their levels and other settings to achieve a good balance. The following simplified mixer ...

Controls and Connectors MGP16X/MGP12X Owner’s Manual 20 !3 PAN controlPAN/BAL controlBAL control The PAN control knob determines the stereo positioning of each mono channel signal in the GROUP 1-2, 3-4 buses or in the stereo L and R buses. For example, rotating the knob toward L moves the sound to t...

MGP16X/MGP12X Owner’s Manual 21 Controls and Connectors Built-in digital effects section  About the Detailed Setting Mode The detailed setting mode lets you adjust the attenuation of the CH15/16 (CH11/12) for adjusting the play level from the iPod/iPhone, and also adjust the range of the Ducker fun...

MGP16X/MGP12X Owner’s Manual 23 Controls and Connectors Meter/PHONES section q PHONES jack Connect a pair of headphones to this TRS phone jack. The PHONES jack outputs the same signal as the MONITOR OUT jacks. w POWER indicator This indicator lights up when the mixer’s power is ON. e Level meter Thi...

Controls and Connectors MGP16X/MGP12X Owner’s Manual 24 SEND MASTER section q SEND MASTER controls (AUX1, AUX2, FX1, FX2) These adjust the signal level sent to the AUX, AUX2, FX1 and FX2 SEND jacks. NOTE These SE N D MASTER controls do not affect the level of the signal sent from the internal digita...

MGP16X/MGP12X Owner’s Manual 25 Controls and Connectors Rear Input/Output Block Channel I/O connectors section q Mono inputs • INSERT: These jacks are located between the com- pressor and equalizer of the corresponding input channel. The I N SERT jacks are ideal for connect- ing devices such as grap...

Controls and Connectors MGP16X/MGP12X Owner’s Manual 26 Master I/O connectors section r 2TR IN These RCA pin jacks can be used to input a stereo sound source. Use these jacks when you want to connect a CD player, and output the signal to the monitor or the STEREO L/R bus. NOTE You can adjust the sig...

MGP16X/MGP12X Owner’s Manual 27 Troubleshooting * If any specific problem should persist, please contact your Yamaha dealer.  Power doesn’t come on.  Is an independent power-supply unit such as a power generator, or a power strip with switch plugged into the mixer?Make sure that the power is turne...

MGP16X/MGP12X Owner’s Manual 28 Appendix Digital Effect Program List  FX1 REV-X (REV-X algorithm)  FX2 SPX (SPX algorithm) * “LFO” stands for Low Frequency Oscillator. An LFO is normally used to modulate another signal, determining the modulation speed and waveform shape. No. Program Parameter Var...

MGP16X/MGP12X Owner’s Manual 29 Appendix Jack List * These jacks will also accept connection to phone plugs. If you use monaural plugs, the connection will be unbalanced. Input and Output Jacks Polarities Configurations MIC/LI N E, MIC, AUX SE N D, STEREO OUT Pin 1: GroundPin 2: Hot (+)Pin 3: Cold (...

Appendix MGP16X/MGP12X Owner’s Manual 30 Specifications  Electrical Characteristics 0 dBu=0.775 Vrms, 0 dBV=1 VrmsAll faders are set to nominal position if not specified. ( N ominal position is adjusted to a position that is 10 dB lower than the maximum position) Output impedance of signal generato...

MGP16X/MGP12X Owner’s Manual 31 Appendix  Analog Input Specifications 0 dBu=0.775 Vrms, 0 dBV=1 Vrms *1 Sensitivity: The lowest level that will produce an output of +4 dB (1.23 V), or the nominal output level when the unit is set to maximum level. (All faders and level controls are at their maximum...

Appendix MGP16X/MGP12X Owner’s Manual 32 Dimensions * Specifications and descriptions in this owner’s manual are for information purposes only. Yamaha Corporation reserves the right to modify products or specifications at any time without prior notice. Since specifications, equipment, and options ma...

MGP16X/MGP12X Owner’s Manual 33 Appendix Block Diagram and Level Diagram FX1-IN FX2-IN MID LO W HIGH [0dB u ] +4 8V +4 8V RE 26 d B PA D HA +4 8V +4 8V RE HA HPF 100 COMP COMP(TH) LO W MID HIGH 3-Stage EQ MID f [0dB u ] GAIN MA IN & MO N O 4 ON YE SIG PEAK GR RE INSERT [0dB u ] [-60dB u ~-16dB u...

MGP16X/MGP12X Owner’s Manual 35 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifica-tions not expressly approved by Yamaha may void your authority, granted by the FCC, to use the produc...