Yamaha MD 8 - Manuals

iv MD8—Owner’s Manual Contents 1. Welcome to the MD8 . . . . . . . . . . . . . . . . 1 MD8 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Mixer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

vi MD8—Owner’s Manual 9. The MD8 & MIDI . . . . . . . . . . . . . . . . . . . 73 Using the MD8 in a Synchronized MIDI System . . . . . . . . . . . . . . . . . . . . . . 73About Tempo Maps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73Setting Up a Syn...

Welcome to the MD8 1 MD8—Owner’s Manual 1 Welcome to the MD8 Thank you for choosing the Yamaha MD8 Multitrack MD Recorder. The MD8 uses the MiniDisc format for 8-track multitrack recording, with superior sound quality and quick search capabilities. To take best advantage of your MD8, read this Owner...

Buying Discs for the MD8 3 MD8—Owner’s Manual Buying Discs for the MD8 It’s important that you buy the correct type of disc for use with your MD8. For 8-track recording and playback, you must use MD DATA discs. Regular MiniDiscs can only be used for 2-track recording and playback (2TR mode). MD DATA...

4 Touring the MD8 MD8—Owner’s Manual 2 Touring the MD8 This chapter takes you on a tour of the MD8, identifying the various parts to help you become familiar with your new recorder. Topside View The individual sections of the MD8 are explained on the following pages. MULTITRACK MD RECORDER GROUP 1 C...

Input Channels 5 MD8—Owner’s Manual Input Channels A GAIN control This rotary control adjusts the sensitivity of the MIC/LINE input so that both microphone and line-level signals can be handled with ease. B FLIP switch This switch is used to select the signal sources for the input channel and CUE co...

6 Touring the MD8 MD8—Owner’s Manual F GROUP ASSIGN switches These switches are used to assign (i.e., send) the input channel signal to groups. They work in conjunction with the PAN control. For example, with GROUP ASSIGN switch [1–2] ON and the PAN control set midway, the channel signal is sent equ...

Master Section 7 MD8—Owner’s Manual Master Section A 9–10/11–12 input level controls These rotary controls are used to adjust the level of the 9–10 and 11–12 input signals that are sent to the Stereo bus for mixing. They’re also used in conjunction with the GROUP ASSIGN switches to adjust the level ...

8 Touring the MD8 MD8—Owner’s Manual Display A Status indicators These indicators show the current operating mode. B Pitch indicators These indicators show the current Pitch mode: FIX (fixed) or VARI (variable). C MTC, MIDI CLK, and MMC indicators These indicators light when the MIDI synchronization...

10 Touring the MD8 MD8—Owner’s Manual Disc Transport Section A Disc Transport buttons REHE —This button is used to enter Rehearse mode. The REHE indicators flash in Rehearse Pause mode and stay on continuously while rehearsal is in progress. REC —This button is used to enter Record mode. The REC ind...

Disc Transport Section 11 MD8—Owner’s Manual E A B Repeat buttons These buttons are used to enter the A and B points for A-B Repeat. F REPEAT button This button is used to select the 1 Song, All Song, A-B, and Auto Punch Rehearse Repeat modes. It’s also used to cancel A-B Repeat mode. G MARK SEARCH ...

12 Touring the MD8 MD8—Owner’s Manual Rear Panel A AC IN Connect the supplied power cord here. B POWER ON/OFF switch This switch is used to turn on and off the MD8. C MIDI IN, OUT & THRU The MD8 receives MMC (MIDI Machine Control) commands via the MIDI IN port, and outputs MIDI Clock or MTC (MID...

Rear Panel 13 MD8—Owner’s Manual D AUX SEND These 1/4-inch phone jacks are used to send the Aux Send signals to external effects pro-cessors. Connect them to the effects proces-sors’ inputs. E LINE INPUT 9–10/11–12 These 1/4-inch phone jacks are used to con-nect unbalanced electronic musical instru-...

14 Touring the MD8 MD8—Owner’s Manual G INSERT I/O These TRS phone jacks are used to connect signal processors for use with input channel 1 and input channel 2 exclusively. Typically, compressors, limiters, and noise gates are con-nected to this type of connection. H MIC/LINE INPUTs 1 & 2 These ...

Front Connectors 15 MD8—Owner’s Manual M PHANTOM POWER ON/OFF switch This switch is used to turn on and off the phantom power for the XLR-type MIC/LINE (BAL) inputs on channels 1 and 2. Phantom power is used to power condenser microphones. It should be turned off when devices other than condenser mi...

16 The First Session MD8—Owner’s Manual 3 The First Session This chapter explains how to record and mix your first MD8 session. If this is your first time with a multitrack recorder, we recommend that you start with this chapter and follow all the procedures closely. When you’ve completed this chapt...

Connecting the Power Cord 17 MD8—Owner’s Manual Connecting the Power Cord 1. Connect the supplied power cord to the AC IN socket on the rear of MD8. 2. Plug the other end of the power cord into a suitable AC wall outlet. Turning on the MD8 1. Press the POWER switch at the rear of the MD8. The displa...

18 The First Session MD8—Owner’s Manual Making the Connections (GRP & DIR) 1. Connect a sound source to MIC/LINE INPUT 1. If you are using a condenser microphone, set PHANTOM switch to ON to turn on phantom powering. 2. Set the [FLIP] switch on Input Channel 1 to MIC/LINE. 3. If you connect a li...

Recording the First Track 19 MD8—Owner’s Manual DIR Method 1. Press the REC SELECT [1] button. The TRK 1 DIR indicator flashes, indicating that track 1 is set to record directly from input channel 1. 2. Proceed to Monitoring & Recording (GRP & DIR) . Monitoring & Recording (GRP & DIR...

20 The First Session MD8—Owner’s Manual Overdubbing Overdubbing is the technique used to record new sounds to empty tracks while listening to the sounds already recorded on other tracks. The following overdubbing procedure can be used to record to Tracks 2–8, and you can use the GRP or DIR method, t...

Mixdown 21 MD8—Owner’s Manual Mixdown Mixdown is the final technique in multitrack recording. Here you mix the sounds from all eight tracks, with EQ and effects to create a balanced stereo signal that is recorded to a stereo master recorder, such as a DAT, MiniDisc, or cassette tape deck. 1. Make su...

22 The First Session MD8—Owner’s Manual An Overview of Multitrack Recording This section describes the fundamental principles of multitrack recording. Basic Multitracking Monitoring —This is the process of listening to a sound as it’s being recorded or listening to recorded sounds as new sounds are ...

About Monitoring 23 MD8—Owner’s Manual About Monitoring The MD8 features a flexible monitoring system, allowing you to monitor signals at various points. You can monitor sounds through a pair of stereo headphones connected to the PHONES jack, or through a monitor amplifier and speakers connected to ...

24 The First Session MD8—Owner’s Manual Multi-Source Mixing In addition to the eight disc tracks, you can also connect external sound sources to the MIC/LINE inputs and mix up to eight more sound sources with the disc tracks. These extra sound sources are mixed using the CUE LEVEL and PAN controls. ...

Multi-Source Mixing 25 MD8—Owner’s Manual 4. Set the input channel and STEREO faders to the 7–8 mark, and set the CUE LEVEL controls midway. 5. Set the [CUE MIX TO STEREO] switch to ON. 6. Press the MONITOR SELECT [STEREO] switch and set the MONITOR LEVEL control to an appropriate level. 7. Set the ...

26 Recording & Mixing Techniques MD8—Owner’s Manual 4 Recording & Mixing Techniques This chapter explains MD8 recording and mixing techniques. Recording a New Song The NEW REC function is used to record new songs on a disc. Songs are recorded sequen-tially, as shown below. With a blank disc,...

Recording a New Song 27 MD8—Owner’s Manual Setting the Recording Mode The following table shows the four MD8 Recording modes. Songs on the same disc can be recorded in different modes, but you cannot change the mode during or after recording. These modes allow you to use disc space efficiently. Audi...

28 Recording & Mixing Techniques MD8—Owner’s Manual Recording 1. Press the [REC] button to engage Record Pause mode. The display shows the number of the new song and NEW X REC . This is Record Pause mode. Initially, all tracks that can be recorded in the current Recording mode are selected, as s...

Manual Punch In/Out 29 MD8—Owner’s Manual Manual Punch In/Out The Punch In/Out technique allows you to rerecord specific sections of a track. This can be used to correct mistakes or record something new into silent sections of a track. If you’re operating the MD8 and playing or singing the part to b...

30 Recording & Mixing Techniques MD8—Owner’s Manual Using the REC SELECT buttons 1. Locate to a position before the point at which you want to punch in. 2. Make sure that all REC indicators are off (i.e., no tracks selected). 3. Press the [REC] button. The REC indicators (i.e., the indicator of ...

Manual Punch In/Out 31 MD8—Owner’s Manual Using a Footswitch 1. Connect an optional footswitch to the PUNCH I/O jack (front panel). 2. Locate to a position before the point at which you want to punch in. 3. Press the [REC SELECT] button (or [GROUP] + [REC SELECT]) of the track that you want to recor...

Auto Punch In/Out 33 MD8—Owner’s Manual Using [SET] and LAST REC SEARCH Another way of setting the Punch In and Out points on the fly is by using the [SET] and LAST REC SEARCH buttons (also labelled [IN] and [OUT]). Doing so has the advantage that you do not need to select a track for recording befo...

34 Recording & Mixing Techniques MD8—Owner’s Manual Single Take Auto Punch In/Out Rehearsing Auto Punch (Single Take) 1. Press the [REC SELECT] button (or [GROUP] + [REC SELECT]) of the track that you want to record. A dot flashes above the corresponding track indicator. 2. Press the [AUTO PUNCH...

Auto Punch In/Out 35 MD8—Owner’s Manual Performing Auto Punch for Real 1. Press the [REC SELECT] button (or [GROUP] + [REC SELECT]) of the track that you want to record. A dot flashes above the corresponding track indicator. 2. Press the [AUTO PUNCH I/O] button. 3. Select the Auto Punch In mode (Sin...

36 Recording & Mixing Techniques MD8—Owner’s Manual Auto Punch with a Footswitch An optional footswitch can be used to start the Auto Punch In/Out sequence. 1. Press the [REC SELECT] button (or [GROUP] + [REC SELECT]) of the track that you want to record. A dot flashes above the corresponding tr...

Auto Punch In/Out 37 MD8—Owner’s Manual Multi Take Auto Punch In/Out As previously mentioned, Multi Take Punch In/Out means that you can record several ver-sions of the same excerpt, audition them, decide which one you like best, and then discard the remaining Takes. You need to set the Punch In and...

38 Recording & Mixing Techniques MD8—Owner’s Manual Performing Multi Take Auto Punch for Real 1. See steps (1)–(3) above. The display now reads TAKE 1 Load . Next, the Pre-Roll point is located automatically. The REHE indicators flash and the display shows TAKE 1 Rehe . The AUTO PUNCH IN and OUT...

40 Recording & Mixing Techniques MD8—Owner’s Manual Setting the Pre-Roll & Post-Roll Times Pre-Roll and Post-Roll are used in conjunction with the Auto Punch In/Out function. Pre-Roll refers to the time before the IN point at which playback starts. Post-Roll refers to the time after the OUT ...

42 Recording & Mixing Techniques MD8—Owner’s Manual Preparing for Ping-Pong 1. Press the [ ] SONG SEARCH button to locate the beginning of the song. 2. Set the [FLIP] switches on the source track channels to PB. This sets the disc playback (track) signal as the source for the channels. 3. Set th...

Ping-Pong Recording 43 MD8—Owner’s Manual Rehearsing Ping-Pong 8. Press the [REHE] button. The REHE indicators flash. 9. Press the [PLAY] button to start the rehearsal. The rehearsal starts and the PLAY indicators light up. The REHE indicators stop flashing and light up continuously. You should now ...

44 Recording & Mixing Techniques MD8—Owner’s Manual Ping-Pong with Overdub The ping-pong technique can be combined with overdub recording. This allows you to bounce down tracks and record a new sound source simultaneously. In the following illus-tration, for example, Tracks 5, 6, and 7 are bounc...

46 Recording & Mixing Techniques MD8—Owner’s Manual Pitch The Pitch function allows you to adjust the pitch for playback and recording. The pitch can be adjusted approximately ± 12%. Normally, the Pitch function should be set to Fix, which means the pitch is fixed for normal operation. See Pitch...

Using a Footswitch 47 MD8—Owner’s Manual Using a Footswitch An optional footswitch can be used to control the MD8. Apart from a few small differences, footswitch operation is essentially the same as pressing the MD8 [PLAY] button. Connect the footswitch to the PUNCH I/O jack at the front of the MD8....

48 Recording & Mixing Techniques MD8—Owner’s Manual Applying Effects The AUX SENDs 1 and 2 allow you to connect external effects processors and apply effects to MD8 signals. Effects can be applied when recording tracks, using ping-pong, or during mixdown. Typically, reverb and delay type effects...

Applying Effects when Recording 49 MD8—Owner’s Manual Applying Effects when Recording 1. To send an input channel signal to an effects processor, set the [FLIP] switch to the up position, the fader to the 7–8 mark, and turn up an AUX control. The input channel signal is sent to the effects processor...

50 Recording & Mixing Techniques MD8—Owner’s Manual Patching in Signal Processors Input channels 1 and 2 feature INSERT I/O jacks. These make it easy to patch external signal processors directly into these two channels. Typically, compressors, limiters, and noise gates are used for this type of ...

Quick Search Functions 51 MD8—Owner’s Manual 5 Quick Search Functions This chapter explains the quick search functions. Searching for Songs The [ ] and [ ] SONG SEARCH buttons can be used for locating songs at any time except when recording. The [ ] SONG SEARCH button locates the previous song and t...

52 Quick Search Functions MD8—Owner’s Manual 3. Turn the CURSOR shuttle to the left to rewind at the desired speed The display shows the value of the selected Review (REV) speed (see the above illustration). 4. If you like, you can “lock” the currently selected Cue/Review speed by pressing the [ENTE...

Searching for Markers 53 MD8—Owner’s Manual Searching for Markers The [ ] and [ ] MARK SEARCH buttons are used to search for markers within a song. The [ ] MARK SEARCH button locates the previous marker and the MARK SEARCH [ ] button locates the next marker. For a song with no markers inserted, you ...

54 Quick Search Functions MD8—Owner’s Manual Adjusting Markers Once inserted, markers can be finely adjusted in one-frame steps. This also applies to the LAST REC IN and OUT points (they double as Punch In and Out points). The Start and End markers cannot be adjusted. 1. Press the [ADJUST] button. T...

Adjusting Markers 55 MD8—Owner’s Manual 4. Use the DATA dial to adjust the marker and the [PLAY] and the CURSOR shuttle to audition the new marker position. The marker can be moved in 86-frame steps to a new position within the 10 seconds of sound data loaded into memory. If you want to move the mar...

56 Quick Search Functions MD8—Owner’s Manual Erasing Markers 1. Press the [ADJUST] button. The display shows MAR X: ADJST . 2. Use the DATA dial to select the marker that you want to erase. 3. Turn the CURSOR shuttle to the right to make the ADJST message flash. 4. Use the DATA dial to select CLEAR....

Repeat, Cue List & Program Play 57 MD8—Owner’s Manual 6 Repeat, Cue List & Program Play This chapter explains the Repeat, Cue List, and Program Play functions. One Song Repeat One Song Repeat playback allows you to play one song repeatedly. 1. Use the [SONG SEARCH] buttons to select the song...

58 Repeat, Cue List & Program Play MD8—Owner’s Manual A–B Repeat A–B Repeat playback allows you to repeatedly play a section of a song. Playback repeats between the specified A and B points, which can be in separate songs. 1. Press the [PLAY] button to start playback. 2. Press the [A B] button w...

Cue List Playback & Copy 59 MD8—Owner’s Manual Cue List Playback & Copy The Cue List function allows you to compile a cue list (i.e., a sequence of cues for playback) using markers. Cues are loaded into memory for continuous, uninterrupted playback. The Cue List can also be copied to create ...

60 Repeat, Cue List & Program Play MD8—Owner’s Manual Program Playback The Program Play function allows you to compile a program of songs for custom playback. The Program may contain up to 36 steps. 1. Press the [UTILITY] button and use the DATA dial to select the PRG Play function. 2. Press the...

Editing Songs & Tracks 61 MD8—Owner’s Manual 7 Editing Songs & Tracks This chapter explains the edit functions that can be used with songs and tracks. Viewing Disc Contents The Disc Info function allows you to view how the songs and blanks on a disc are organized. Using this function is inva...

62 Editing Songs & Tracks MD8—Owner’s Manual Erasing Discs The Disc Erase function allows you to erase all songs on disc. Erasing all songs formats a disc. A disc that has been used to store computer data must be formatted using this function before it can be used with the MD8. 1. Press the [EDI...

Copying & Converting Songs 63 MD8—Owner’s Manual 6. Turn the CURSOR shuttle to the right to select the first track of the song copy. The number of this track (probably “1” now flashes). 7. Use the DATA dial to select another track. Doing so means that track 1 of the copy will no longer correspon...

64 Editing Songs & Tracks MD8—Owner’s Manual 12. Press the [TOC WRITE] button to update the TOC. The following illustration shows a few possible applications of the Song Copy function. It is so flexible that we cannot show all possibilities. Just remember that you are free to choose whichever tr...

Moving Songs 65 MD8—Owner’s Manual 4. Press [ENTER] to renumber the songs. After renumbering the songs, the display will briefly show TOC Write to signal that the TOC is being updated. Moving Songs The Song Move function allows you to move a song to a blank area. Doing so means that you create a bla...

66 Editing Songs & Tracks MD8—Owner’s Manual Dividing Songs The Song Divide function allows you to divide songs into several independent songs. Songs can also be arranged as a program for playback. See Program Playback on page 60 for more information. 1. Locate the position where you want to div...

Combining Songs 67 MD8—Owner’s Manual Combining Songs The Song Combine function allows you to combine adjacent songs that were divided using the Song Divide function. Songs that were recorded separately cannot be combined (though you can select their numbers, the display will tell you Can't Combn wh...

68 Editing Songs & Tracks MD8—Owner’s Manual Erasing Songs The Song Erase function allows you to erase individual songs, which may be necessary to make room for new material you wish to record. 1. Press the [EDIT] button and use the DATA dial buttons to select the Song Erase function. 2. Press t...

Erasing Parts 69 MD8—Owner’s Manual Erasing Parts The part Erase function allows you to erase a section of a track. The section to be erased is determined by the IN and OUT points. These points can be set by holding down the [SET] button while pressing [IN] or [OUT] respectively. 1. Press the [EDIT]...

70 Editing Songs & Tracks MD8—Owner’s Manual Copying Tracks The Track Copy function allows you to copy individual tracks. The copy is recorded at the same volume level as the original. 1. Press the [EDIT] button to call up the Edit menu and use the DATA dial to select the Track Copy function. 2....

Copying Parts 71 MD8—Owner’s Manual Copying Parts The Part Copy function allows you to copy a section of one track to another track. The sec-tion of the source track to be copied is determined by the IN and OUT points. These points can be set by holding down the [SET] button while pressing [IN] or [...

72 Other Functions MD8—Owner’s Manual 8 Other Functions Frame Display The Frame Disp function allows you to choose whether the display counter shows 86 frames per second, the standard frame count for MiniDisc, or 30 frames per second for when the MD8 is generating MTC. 1. Press the [UTILITY] button ...

The MD8 & MIDI 73 MD8—Owner’s Manual 9 The MD8 & MIDI MIDI sequencers and MIDI controlled musical instruments have become essential tools for modern recording. It’s common these days not to record MIDI instruments until the final mixdown. This has the benefit of freeing up tracks for acousti...

74 The MD8 & MIDI MD8—Owner’s Manual Setting Up a Synchronized MIDI System The following system shows how the MD8 can be integrated into a MIDI-based recording system. Acoustic sounds are recorded to the MD8, while MIDI instruments are controlled by a MIDI sequencer, which receives MTC or MIDI C...

Using MTC 75 MD8—Owner’s Manual Using MTC Setting the MD8 for MTC Operation 1. Press the [UTILITY] button and use the DATA dial to select the MIDI Sync function. 2. Press the [ENTER] button. The display shows Sync OFF . 3. Use the DATA dial to select MTC (MIDI Timecode). Sync MTC appears on the disp...

76 The MD8 & MIDI MD8—Owner’s Manual Using MIDI Clock Setting the MIDI Sequencer The MIDI sequencer must be set to receive and synchronize to an external MIDI Clock source. Refer to your MIDI sequencer’s user manual for more information. Exact MIDI Clock operation depends on what external synchr...

Using MIDI Clock 77 MD8—Owner’s Manual 5. Use the CURSOR shuttle to select the measure and time signature param- eters and set the desired values using the DATA dial. The setting range for the measure parameter is 1–999, while Meter allows for 1–99/2–16 set-tings. In other words, you could program a...

78 The MD8 & MIDI MD8—Owner’s Manual 5. Use the CURSOR shuttle to select the measure, beat, and tempo param- eters and set the desired values using the DATA dial. The measure can be set from 1 to 999. The beat parameter depends on the number of beats per measure, which is specified by the Meter ...

Using MIDI Clock 79 MD8—Owner’s Manual The following example shows how sorting works when a tempo step is deleted. Saving a Tempo Map The Song Tempo (Meter and Tempo) settings are stored as soon as you update the TOC by pressing the [TOC WRITE] (STOP) button. It will be automatically loaded when you...

80 The MD8 & MIDI MD8—Owner’s Manual Controlling the MD8 with MMC Quite a few of the MD8’s functions can also be controlled using MIDI Machine Control (MMC) commands. MMC is short for a set of MIDI messages that can be used to control audio and video (tape) machines, disc recorders, and other eq...

Controlling the MD8 with MMC 81 MD8—Owner’s Manual Setting the MMC Device ID Because MMC messages are universal commands, you may have to set the MD8 so that it only responds to certain MMC messages. This is only necessary, however, if you are control-ling several MMC-compatible devices that must no...

82 The MD8 & MIDI MD8—Owner’s Manual Tempo Map Chart Meter Tempo Step Measure Time Signature Step Measure -Beat Tempo A 001 / A 001–1 B / B C / C D / D E / E F / F G / G H / H I / I J / J K / K L / L M / M N / N O / O P / P Q / Q R / R S / S T / T U / U V / V W / W X / X Y / Y Z / Z

MD8 Applications 83 MD8—Owner’s Manual 10 MD8 Applications This chapter shows how the MD8 can be used for various applications. One-Take Recording One-Take recording is ideal for live recording or recording bands that like to record with all members playing together. In this system, vocals, backing ...

84 MD8 Applications MD8—Owner’s Manual MIDI Home Studio In this system, acoustic instruments are recorded to the MD8, while MIDI instruments are controlled by a MIDI sequencer, which receives MTC or MIDI Clock from the MD8. Since the MIDI sequencer provides repeatable playback and is synchronized to...

Using the MD8 with Another Mixer 85 MD8—Owner’s Manual Using the MD8 with Another Mixer In this system, the MD8 is used in conjunction with another mixer, in this case, a Yamaha 03D Digital Mixing Console. Track signals are fed to the 03D via the MD8’s DIRECT OUTs. The 03D offers 4-band parametric E...

86 Beyond the Basics MD8—Owner’s Manual 11 Beyond the Basics This chapter provides some advanced tips and techniques for MD8 recording. Effects Return You can use LINE INPUTs 9, 10, 11, and 12 with an external effects processor. But they can also be used as extra stereo inputs. They accept line-leve...

Pitch Applications 87 MD8—Owner’s Manual Pitch Applications Adjusting the pitch is a common multitrack technique. It’s useful when recording instru-ments that are slightly out of tune. For example, you’ve recorded the drum and bass parts and now it’s time to record the acoustic piano part. However, ...

88 Beyond the Basics MD8—Owner’s Manual Mixdown This section provides tips and techniques for achieving the perfect MD8 mix. • Balance levels —you should already have some idea of how you want your mix to sound. This will, obviously, depend on the application and the instruments being mixed. Start w...

90 Q&A Section MD8—Owner’s Manual Do I have to sacrifice one track to record timecode? No. The MD8 generates MTC (MIDI Timecode) or MIDI Clock from the disc’s internal sync signals. So even in a synchronized MIDI system, all eight tracks are available for sound recording. How many songs can I st...

91 MD8—Owner’s Manual Troubleshooting If you’re having difficulty operating the MD8 or if it doesn’t seem to work as expected, look up the symptoms in the following table and follow the advice provided. Symptom Advice The MD8 cannot be turned on! Make sure the power cord is connected to a suitable A...

MD8 Transport Modes 93 MD8—Owner’s Manual Appendix MD8 Transport Modes ● On z Flashing Mode Indicators MD8 Status REHE REC PLAY Stop — — — No activity. Play — — ● Normal playback Play Pause — — z Playback is paused. Cue FF — — ● Quick preview at 0.5X, 2X, 4X, 8X, 16X or 32X play. Review — — ● Quick ...

94 Appendix MD8—Owner’s Manual Display Messages Message Meaning A A A AD D D DJ J J JS S S ST T T T S S S St t t to o o op p p p The [STOP] button was pressed, so the Adjust function was cancelled. B B B Bl l l la a a an n n nk k k k D D D Di i i is s s sc c c c The disc is blank. B B B BL L L LA A ...

Specifications 95 MD8—Owner’s Manual Specifications Recorder Mixer 0 dB is referenced to 0.775 V r.m.s. Digital/Audio Sampling Frequency: 44.1 kHz Compression: ATRAC Frequency Response: 20 Hz–20 kHz, +1 dB, –3 dBTHD+N: Less than 0.02% (1 kHz)S/N: 96 dB typ. Rec/Play 8-track independent simultaneous ...

96 Appendix MD8—Owner’s Manual General Specifications subject to change without notice. Power Requirements USA & Canada: 120 V/60 Hz, Others: 230 V/50 Hz Power Consumption 40 W Dimensions (W x H x D) 484 x 102 x 412.3 mm Weight 6.4 kg Operating Conditions Temperature 5˚C–35˚C (41˚F–95˚F) Humidit...

Block Diagram 97 MD8—Owner’s Manual Block Diagram PB MIC/ LINE 3 Band EQ 3 Band EQ LINE MIC/ PB CUE MASTER 2 1 DIRECT 2 to Ch2 FLIP (CUE) GROUP 2 CH 2 Tr2 to Ch2 FLIP (EQ) from Ch2 from Ch8 GROUP 4 CH 8 to Ch8 FLIP (EQ) Tr8 to Ch8 FLIP (CUE) 8 REC Recorder PB PB Rec REC Recorder PB PB Rec from TRACK...

98 Appendix MD8—Owner’s Manual Dimensions W: 484 mm D: 412.3 mm H:102 mm Unit: mm

Glossary 99 MD8—Owner’s Manual Glossary ATRAC —An acronym for Adaptive Transform Acoustic Coding. This is the compression technique used to fit the same amount of data as that of a 120 mm CD on a 64 mm MiniDisc. Using the ATRAC system, the MD8 provides an 8-track recording time of 18 minutes. ATRAC ...

102 Index MD8—Owner’s Manual Index Numerics 2TR IN Connecting 85 2TR IN connectors 14 2TR IN MONITOR SELECT switch 7 A A-B buttons 11 A–B repeat 58 AC IN connector 12 ADJUST button 11 Adjusting markers 54 Advanced multitracking 22 All song repeat 57 Applications MIDI home studio 84 One-take recordin...

YAMAHA [Multitrack Recorder] Date: 11 Sept 1997 Model: MD8 MIDI Implementation Chart Version: 1.0 Function... Transmitted Recognized Remarks Basic Channel DefaultChanged XX XX Mode DefaultMessagesAltered XX ************** XXX Note Number True Voice X ************** XX Velocity Note OnNote Off XX XX ...

Source: Source: Source: Source: Source: Source: Source: Source: Source: Source: 12345678 Tracking Sheet Title: Session Info Track List Mixer Setup Date: Step: Process: Notes: Step 1 2 3 4 5 6 7 8 9 → → → → → → → → → Section Repeat Title Cue List [S] [1] [2] [5] [E] [3] [4] [6] [7] [8] [9] [10] Marke...