Yamaha GO46 - Manuals

9 Software Installation — Windows users Installing the driver and the Control Panel 1. Insert the included “TOOLS for GO44/GO46” CD-ROM in the CD-ROM drive ofyour computer. 2. Double-click on the CD-ROM drive icon in the My Computer menu. Open[GO46Driver_] → [GO46 Setup.exe] to start the InstallShie...

13 Front Panel A INPUT 1/2 jacks These inputs are intended for microphones with XLR connectors or instruments with 1/4"jacks. When connecting devices to the INPUT jacks on both the front and rear panels, theinput on the front panel takes precedence and will automatically be active. B [GAIN 1]/[G...

15 Connectors and controls Rear Panel I INPUT 1/2 jacks The GO46 System features two high-quality analog mono inputs. The connections have beendesigned for balanced/unbalanced phone 1/4" jacks. The gain for these inputs can also be setusing the GAIN knobs on the front panel. When connecting devi...

17 Windows drivers The GO46 audio interface features two kinds of audio drivers that support a variety ofapplications. The audio drivers support all bit rates between 8 and 24 bits with all commonsample rates between 32 and 192 kHz. (Supports digital I/O up to 96 kHz) MME driver The Windows MME driv...

18 Drivers For Cubase, the inputs are called “Line 1/2 left GO46”, “SPDIF left GO46”, etc. Also, the outputs(generally called “busses” or “channels”) available in the individual programs are generally called“Multichannel 1 GO46”, “SPDIF/AC3 left GO46”, etc. Cubase LE MIDI driver This driver is for u...

19 Drivers Mac OS X drivers In Mac OS X, the GO46 system is supported completely by Apple CoreAudio and CoreMIDI.Device-specific drivers are not required. If you would like to use the GO46 for the default systemsound output, select the GO46 audio driver in [System Preferences] → [Sound] → [Output]. ...

20 The GO46 Control Panel is quite intuitive and should not present beginners with major problems.Here, depending on the requirements of each situation, you can have total control of the audiointerface, reduce levels, route inputs to any output or set the Master Clock values. The GO46Control Panel h...

22 GO46 Control Panel ROUTING Selects the output signal sent from the OUTPUT 1/2, OUTPUT 3/4, and DIGITAL OUT jacks. Allinput signals (DAW IN 1/2, DAW IN 3/4, DAW IN 5/6, ANALOG IN, DIGITAL IN, and DIGITALMIXER) can be routed to the three output pairs * . Click the three buttons on the left-hand sid...

23 GO46 Control Panel The SCENES panel Saves/calls up scenes. A scene is a file in which the Control Panel settings are saved (exceptsettings in the MASTER CLOCK column; page 21). Save the scene and call up the file, and thesettings can be reloaded whenever necessary. To open the SCENES panel in Win...

24 ■ General Specifications ■ Input/Output Specifications Specifications Bit Depth 8/16/24 Sampling Frequency (kHz) 32/44.1/48/88.2/96/192 Frequency Response 20Hz — 20kHz Dynamic Range 107dB (Input/44.1kHz) Power Consumption 11W Analog Input Connector Nominal Input Level Max. Input Level Resolution ...

25 GO46 • The system requirements below may differ slightlydepending on the par ticular operating system. • For details on minimum requirements for each DAW(Digital Audio Workstation) software, refer to therespective owner’s manual. • You can check the latest system requirements on theInternet.http:...

26 ■ The GO46 won’t turn on. • Is the supplied power adaptor properly plugged into both the GO46 and an appropriate ACwall outlet? • If you are using a 4–pin/6–pin IEEE1394 (FireWire) adaptor to connect the GO46 to the com-puter with a 4–pin type IEEE1394 (FireWire) port, use the included AC power a...

EN U.R.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation © 2006 Yamaha Corporation Yamaha Web Site (English Only) http://www.yamahasynth.com Yamaha Manual Library http://www.yamaha.co.jp/manual/ Owner‘s Manual