2 Precautions AVOID EXCESSIVE HEAT, HUMIDITY, DUST AND VIBRATION When choosing a location for your speakers, avoid the following: • Direct sunlight, high temperatures (such as near heat- ers), or excessively low temperatures. • High humidity. • Areas subject to excessive dust accumulation and vibrat...
Page 3 - 日本語; Additions; Connection example; Connections; Speaker system and Neutrik NL4FC connector connections
3 English Français Deutsch Español 日本語 Additions Connection example ■ Connections ● Stand alone 1 Use as full-range speaker system 2 Use as bi-amp speaker system ● Use combined with subwoofer 1 2-way crossover 2 3-way crossover ■ Speaker system and Neutrik NL4FC connector connections ■ Bi-amp driv...
Page 4 - Hanging installation; Standards and use conditions for flying; Maintenance inspection
4 Hanging installation The F12/F15 can be installed hanging. Remove the four countersunk screws on the top or bottom of the speaker system, screw in the four accessory eye bolts and hang with wire. Warning: • Always use the accessory eye bolts.• Always hang with four eye bolts on one surface.• Do no...
5 English Français Deutsch Español 日本語 Additions Specifications ■ SPEAKER SYSTEMS ■ SUBWOOFER Specifications subject to change without notice. ✩ F12M floor mounting angle Model F12 F12M F15 F25 Frequency Range 55 Hz to 20 kHz 45 Hz to 20 kHz Power Capacity NOISE 350 W (EIA RS-426) 700 W (EIA RS-42...
2 Precautions AVOID EXCESSIVE HEAT, HUMIDITY, DUST AND VIBRATION When choosing a location for your speakers, avoid the following: • Direct sunlight, high temperatures (such as near heat- ers), or excessively low temperatures. • High humidity. • Areas subject to excessive dust accumulation and vibrat...
Page 3 - 日本語; Additions; Connection example; Connections; Speaker system and Neutrik NL4FC connector connections
3 English Français Deutsch Español 日本語 Additions Connection example ■ Connections ● Stand alone 1 Use as full-range speaker system 2 Use as bi-amp speaker system ● Use combined with subwoofer 1 2-way crossover 2 3-way crossover ■ Speaker system and Neutrik NL4FC connector connections ■ Bi-amp driv...
Page 4 - Hanging installation; Standards and use conditions for flying; Maintenance inspection
4 Hanging installation The F12/F15 can be installed hanging. Remove the four countersunk screws on the top or bottom of the speaker system, screw in the four accessory eye bolts and hang with wire. Warning: • Always use the accessory eye bolts.• Always hang with four eye bolts on one surface.• Do no...
5 English Français Deutsch Español 日本語 Additions Specifications ■ SPEAKER SYSTEMS ■ SUBWOOFER Specifications subject to change without notice. ✩ F12M floor mounting angle Model F12 F12M F15 F25 Frequency Range 55 Hz to 20 kHz 45 Hz to 20 kHz Power Capacity NOISE 350 W (EIA RS-426) 700 W (EIA RS-42...