Yamaha DME - Manuals

DME Setup Manual 6 After connecting the computer to the DME unit via a USB cable, the Device Group and IP address for each DME unit can be individually set from the DME Designer. n These parameters can also be set directly via the panel controls and displays of the DME64N and DME24N ( page 19 ). Dev...

DME Setup Manual 8 4 Master ID When a device is assigned as a Slave in Master/Slave ( 2 ) above, this sets the host address for the Master device in that group. This parameter cannot be set for the Master device. 5 Link Mode Make sure that “100Base-TX” is selected. 10 If the system includes multiple...

DME Setup Manual 9 These settings must be made when DME devices are connected via Ethernet cables. ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● Computer TCP/IP Settings The computer’s IP ...

DME Setup Manual 10 9 Enter your computer’s IP address into [IP address], the Gateway’s IP address into [Default gateway], and “255.255.255.0” into [Subnet mask]. n When the computer and DME devices are connected in the same subnet as described on page 8 , the network address must be set to that sam...

DME Setup Manual 11 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● DME-N Network Driver Settings In order for the computer to recognize the DME device(s), it is necessary to register the IP...

DME Setup Manual 12 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● Creating Configurations The process of launching the DME Designer application and combining and connecting various audio c...

DME Setup Manual 14 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● Going Online After connecting the computer to the DME devices and going online, you can transfer configurations created us...

DME Setup Manual 16 10 Select the [DME Designer -> Device] button, then click [OK] and the DME Designer configuration will be transferred to the DME device. When synchronization has finished the [Go On-line] button will be grayed out and the main panel window [On-line] button will light. n When a...

DME Setup Manual 17 The USB-MIDI Driver cannot be installed. • Is the USB cable connected correctly? • Is the USB function enabled on your computer? When you connect the DME to the computer for the first time, if the “Add New Hardware Wizard” does not appear, the USB function on the computer may be ...

DME Setup Manual 18 When controlling the DME from your computer via Ethernet, the DME does not operate correctly. • Is the Ethernet cable connected correctly? • Is the DME-N Network Driver set up appropriately? Did you enter an appropriate IP address? • Is the computer network setup appropriate? Sel...

DME Setup Manual 19 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● DME64N/24N Network Setup via Panel Operation DME64N and DME24N device group and IP address settings can be made directly v...

DME Setup Manual 20 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● DME-N Network Driver Setup Details “DME-N Network Driver” Window Select [Start] → [Control Panel] → [DME-N Network Driver]...

DME Setup Manual 21 devices added to the Target Device List ( 1 ) by pressing the [NEW] or [DUPLICATE] buttons will only actually be registered for communication with the DME-N Network Driver when the [Apply] button is pressed. 3 [Advanced Settings] Button Opens the “Advanced Settings” window. This ...

DME Setup Manual 22 ATTENTION PLEASE READ THIS SOFTWARE LICENSE AGREEMENT (“AGREEMENT”) CAREFULLY BEFORE USING THIS SOFTWARE. YOU ARE ONLY PERMITTED TO USE THIS SOFTWARE PURSUANT TO THE TERMS AND CONDITIONS OF THIS AGREEMENT. THIS AGREEMENT IS BETWEEN YOU (AS AN INDIVIDUAL OR LEGAL ENTITY) AND YAMAH...