Yamaha CVP - 700 - Manuals

5 CVP-109/107/105/700 Features of the Clavinova ● Large, Easy-to-use LCD Display The large LCD (together with the various panel buttons) provides comprehensive and easy-to-un- derstand control of the Clavinova’s operations (page 16). ● Wealth of Rich, Realistic Voices The Clavinova has a wide variet...

6 CVP-109/107/105/700 Table of Contents ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 4 CHAPTER 1: Getting Ready About This Manual 8 Handling the Floppy Disk Drive (FDD) and Floppy Disks 9 Setting Up the Clavinova 10 Music Stand ......................................

8 CVP-109/107/105/700 This section explains the notation conventions that are usedthroughout this manual. ■ Square brackets [ ] ............................................................................................ Square brackets enclose the names of panel buttons, sliders, and connectors as ...

10 CVP-109/107/105/700 ■ To raise the music stand: ........................................................................... Z Pull the stand up and toward yourself as far as it will go. X Flip down the two metal supports at the left and the right on the rearof the music stand. C Lower the music s...

11 CVP-109/107/105/700 Z Connect the power cord.Insert the plugs at the ends of the cord, one into the AC INLET on thebottom panel of the Clavinova, and the other into a standard AC outlet.In some areas, a plug adapter may be provided to match the pin con-figuration of the AC wall outlets in your ar...

12 CVP-109/107/105/700 C1 D1 E1 F1 G1 A1 B1 C2 D2 E2 F2 G2 A2 B2 C3 D3 E3 B0 A0 G0 F0 E0 D0 C0 B-1 A-1 CVP-109 VOLUME ST YLE START/STOP AUTO ACCOMPANI MENT MASTERVOLUME ACMP / SONG VOLUME MAX MIN MAX DEMO SWING/ JAZZ LATIN TRAD/WALTZ BALL–ROOM 16BEAT 8BEAT DANCE ROCK/ R&B BALLAD PIANIST HELP MAI...

14 CVP-109/107/105/700 The Clavinova features a total of 50 demo songs: 4 feature songs,24 special pieces showcasing the voices, and 22 pieces showcasingthe styles. Listen to them all and hear what the Clavinova can do. X Select the desired play mode. ...................................................

15 CVP-109/107/105/700 (B) To listen to a voice demo, press the VOICE button corre- sponding to the desired voice category. ➔ Playback star ts from the first demo song for the selected category. The lamp of the corresponding VOICE button flashes. There are two demo songs for each voicecategory. To s...

16 CVP-109/107/105/700 You will refer to the LCD display frequently as you operate yourClavinova. This section consists of a shor t tutorial that will helpyou learn how to read the LCD display and use the relatedcontrols. Many of the Clavinova’s functions are displayed at the bottom of the LCD. The ...

17 CVP-109/107/105/700 There are several ways to change a function’s value. Here are two of the main ways: ■ Using the data dial or [–] and [+] buttons ................................. Once you have selected a function, you can change its setting with the data dial or the [–] and [+] buttons. Since...

18 CVP-109/107/105/700 You can use either of the methods described previously to change the current voice selection. Just press RIGHT1 VOICE and hold the button down, or use the data dial or the [+] button to scan through the options. Try listening to a few of the voices whileyou’re at it… Changing ...

19 CVP-109/107/105/700 After you have changed a function’s value, you may find you want to restore its basic setting. To demonstrate this, we’ll have to look at another ofthe Clavinova’s displays. Press the [FUNCTION] button. Resetting a Function’s Value Basic settings• The functions of the Clavinov...

20 CVP-109/107/105/700 Whereas the ▲ and ▼ buttons of the VOICE function you used in the VOICE SELECT display change the menu selection, those of the TUNE function do not. The menu items in the FUNCTION display are not relatedto the TUNE function; instead, they represent different FUNCTION display p...

22 CVP-109/107/105/700 EXIT DIRECT ACCESS ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Using the LCD Display Controls 20 The last function we need to discuss is Direct Access. The [DIRECT AC- CESS] button lets you jump directly to pages with particularly useful settings.When...

23 CVP-109/107/105/700 The Clavinova has two sliders that let you adjust the overall volumeand the accompaniment or song playback volume. There are alsosettings that you can use to adjust the keyboard volume and thevolume of each part of the automatic accompaniment or song. Adjusting the Overall Vol...

24 CVP-109/107/105/700 Call up the MIXER display by pressing [MIXER]. In the Mixer display, the volume of Automatic Accompaniment and individual parts of a song canbe adjusted. Press [MIXER] again (or [EXIT]) to return to the previousdisplay. There are two types of mixer display, as shown below. ● A...

25 CVP-109/107/105/700 You can adjust the sound timbre of the CVP-109/107/700 usingthe Master Equalizer function. Z Call up the MASTER EQUALIZER display. ............................. Press the [MASTER EQUALIZER] button. The button’s lamp lights, and the MASTER EQUALIZER display appears. You can use...

26 CVP-109/107/105/700 C Select the band to be adjusted. ........................................................ Select the band you wish to adjust by pressing the BAND < or > buttons. ➔ The central frequency of the selected band (expressed in Hz) is displayed by the BAND function. V Change t...

27 CVP-109/107/105/700 The Clavinova features a convenient metronome that is ideal for practicing. Theprocedure for setting the metronome tempo can also be used to set the playbacktempo for the Auto Accompaniment (page 63) and Song (page 113) modes. You can start the metronome and set the tempo from...

28 CVP-109/107/105/700 You can change the metronome’s time signature and volume using the settings in the METRONOME page. ■ Displaying the Metronome Settings .............................................. To display the METRONOME page, press [DIRECT ACCESS], then [METRONOME]. Changing the Metronome ...

29 CVP-109/107/105/700 The Help mode provides convenient explanations of the mainfunctions of the Clavinova. You can select help topics from a menudisplayed on the LCD, or press a button on the panel to get helpinformation related to that control. Z Call up the Help mode. ..............................

30 CVP-109/107/105/700 C Select a help topic. ......................................................................................... Use the left LCD buttons or the ▲ and ▼ LCD buttons to select one of the following eight menu items. ➔ The selected menu is highlighted. ➾ Press the LCD button unde...

31 CVP-109/107/105/700 CHAPTER 3: Voices Selecting Voices Exiting the DisplayTo return to the main display, press [EXIT]. Backing Up the Selected Voice• When the power is turned ON, the Grand Piano voice is selected automatically.However, if the Backup function (page206) is set to ON, the last selec...

32 CVP-109/107/105/700 X Select the voice. ................................................................................................. Select the desired voice by pressing the appropriate left or right LCD button. The data dial and [–] and [+] buttons can be also used. You can also select the ...

33 CVP-109/107/105/700 To call up the ORGAN FLUTES display, press the [ORGAN] button and select Organ Flutes in the VOICE SELECT [ORGAN] display. With the Organ Flutes function in this display, you can select from sixdifferent kinds of organ sounds, and even create your own organ soundsby editing th...

34 CVP-109/107/105/700 ■ Editing the Voice ............................................................................................... Select the desired voice for editing, then set each parameter.The ORGAN FLUTES display has two pages: [FOOTAGE] and [AT- TACK]. Press the rightmost LCD button to...

35 CVP-109/107/105/700 ● Making Settings in the ORGAN FLUTES [ATTACK] Display Attack footage volume and LENGTH and RESPONSE settings Select the appropriate bar in the display by pressing the CURSOR buttons, then set the volume, LENGTH , or RESPONSE by using the data dial or [–] and [+] buttons. Sett...

36 CVP-109/107/105/700 The Clavinova has eleven drum kits (ten on the CVP-105) and two SFX kits, found on display pages 2 and 3 of the [PERCUSSION] voicegroup. When one of the drum or SFX kits is selected, various drum, per-cussion, and special effect sounds are assigned to individual keys, lettingy...

37 CVP-109/107/105/700 X Adjust the volume of the main voice. Use the data dial or [–] and [+] buttons to change the volume, or holddown the VOLUME button to increase the volume. Press the [–] and [+] buttons simultaneously to restore the basic setting. ■ Setting the Volume of the Main Voice ..........

38 CVP-109/107/105/700 Playing Two VoicesSimultaneously — Dual Mode To change the main voice while playing in Dual mode, select the RIGHT1 VOICE function then select the main voice in the normal manner. The Dual mode of the Clavinova allows you to select and play twodifferent voices simultaneously i...

39 CVP-109/107/105/700 You can use the settings in the KEYBOARD [RIGHT2] display page to change the volume, octave, pan, and detune of the voice selected usingthe RIGHT2 VOICE function. The settings you make in this page affectany voices you select using the RIGHT2VOICE function. Different settings ...

40 CVP-109/107/105/700 ■ Setting the Stereo Position of the Second Voice ........... The PAN function in the KEYBOARD [RIGHT2] display lets you adjust the stereo position of the second voice. Z Press the PAN button. ➔ The PAN function is highlighted. PAN• Settings: L — ▼ — R • Basic setting: ▼ (cent...

41 CVP-109/107/105/700 Playing Two Voices on DifferentSides of the Keyboard — Split Mode The Split mode of the Clavinova allows you to select and play twodifferent voices with each hand. For example, you can play thebass with your left hand and the piano with your right hand. Z Select the main voice...

42 CVP-109/107/105/700 To change the main voice while playing in Split mode, select the RIGHT1 VOICE function then select the main voice in the normal manner. If you use the VOICE buttons to select avoice while either the tempo or the KBDVOL function is highlighted, the voice youselect will be used ...

43 CVP-109/107/105/700 OCTAVE• Settings: –2 (2 octaves lower) –1 (1 octave lower)0 (no octave shift)+1 (1 octave higher)+2 (2 octaves higher) • Basic setting: +1 PAN• Settings: L — ▼ — R • Basic setting: ▼ (center) PEDAL• Settings: R (right only) L (left only)L+R (both) • Basic setting: R Playing Tw...

44 CVP-109/107/105/700 Z Press the SPLIT POINT button. ➔ The SPLIT function is highlighted. X Change the split point.Use the data dial or [–] and [+] buttons to change the split point, or holddown the SPLIT POINT button to move the split point to the right. Press the [–] and [+] buttons simultaneous...

45 CVP-109/107/105/700 Using the Pedals The Clavinova has three pedals. • Certain voices in the [PERCUSSION] and [XG] groups may not be affectedby use of the damper pedal. • Some voices may sound continuously or have a long decay after the noteshave been released while the damperpedal is held. If yo...

46 CVP-109/107/105/700 CHAPTER 4: Reverb and Other Reverb Reverb ON/OFFBasic setting: Depends on voice. ➔ The lamp lights, and the reverb icon “ ” appears in the main display, followed by the name of the currently selected reverb type. The setting of the [REVERB] button hasno effect on song mode or ...

47 CVP-109/107/105/700 Effects On the CVP-109, the NATURALREVERB display is page 1; the REVERBand REVERB DEPTH pages are num-bered 2 and 3, respectively. X X X X X Use the PAGE [ < ] and [ > ] buttons to switch between the NATURAL REVERB page (CVP-109), the REVERB page, and the REVERBDEPTH pag...

48 CVP-109/107/105/700 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Reverb You can also select a Natural Reverb type with the REVERB TYPE ▲ and ▼ buttons, the data dial, or the [–] and [+] buttons. ➔ The selected Natural Reverb type is highlig...

49 CVP-109/107/105/700 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Use the REVERB TYPE ▲ and ▼ buttons to change the reverb type, or select the REVERB TYPE function and use the data dial or the [–] and [+] buttons. (You can also use the left ...

50 CVP-109/107/105/700 Reverb Z Select a part. Press the LCD button corresponding to RHYTHM to set the reverb depth for the drum part, or ACMP to set it for all other accompani- ment parts. Select LEFT , RIGHT1 , or RIGHT2 to set the reverb depth for the corresponding keyboard part. • You can also s...

51 CVP-109/107/105/700 Chorus The Clavinova’s chorus effects let you modify the voices you play from the keyboard,adding warmth for an even richer sound. Flanger effects add pronounced modulation,for a spacy futuristic quality. You can choose from a variety of chorus and flangereffects, and set the ...

52 CVP-109/107/105/700 If you press the [ < ] button or the [ > ] button while the CHORUS page is show-ing, the REVERB DEPTH page or theEFFECT 1 page (the EFFECT page onthe CVP-105) will be displayed. Refer tothe other sections of this chapter fordetails on reverb and other effect set-tings. ■...

53 CVP-109/107/105/700 ■ Setting the Chorus Depth for Each Part ................................... The other settings in the CHORUS page let you set the chorus depth separately for each part you play from the keyboard. Z Select a part. Press LEFT , RIGHT1 , or RIGHT2 to set the chorus depth for the...

54 CVP-109/107/105/700 Voice Effects (CVP-109/107/700) The Clavinova has a variety of effects besides reverb and chorus that you can use toenhance the sound of the voices or create wild, special effects. The CVP-109/107/700features two complete effect systems, which you can apply individually to any...

55 CVP-109/107/105/700 If the lamp does not light, neither effect system has been assigned to the part in question. Check the PART function settings (page 57). If the lamp lights but the sound of the voice does not change, the effect depth may have been set to 0 . Check the effect depth settings (pa...

56 CVP-109/107/105/700 You can also use the left and right LCD buttons to select one of the effect types listed in the display screen. To reset the effect type to its basic setting, simultaneously press the EFFECT TYPE ▲ and ▼ buttons or the [–] and [+] buttons. ➔ The selected effect type is highlig...

57 CVP-109/107/105/700 PARTSettings: R1 (main) R2 (second)LEFTOFF (no effect) Basic settings: R1 (EFFECT 1) R2 (EFFECT 2) ➔ The value of the PART function changes, displaying each of the settings ( R1 , R2 , LEFT , and OFF ) in turn. Since the changing the value of the PART function means the effect...

58 CVP-109/107/105/700 Voice Effects (CVP-105) The Clavinova has a variety of effects besides reverb and chorusthat you can use to enhance the sound of the voices or create wild,special effects. You can adjust the depth of the effect as desired. To apply the effect to the keyboard parts, press the [...

59 CVP-109/107/105/700 ■ Changing the Effect Type ......................................................................... You can change the effect type selection in the first EFFECT page (page 4 of the display). Select an effect type using the EFFECT TYPE ▲ and ▼ buttons, or highlight the EFFECT ...

60 CVP-109/107/105/700 Effect Depth functions• Range: 0 (no effect) — 127 (max.)• Basic setting: Depends on voice. X Set the effect depth. Set the effect depth for the highlighted part by using the data dial or[–] and [+] buttons.You can also advance a value by pressing the corresponding LCDbutton. ...

61 CVP-109/107/105/700 CHAPTER 5: Accompaniment Styles Selecting Accompaniment Styles The Clavinova has a wide variety of musical “styles” that you can use for simplepercussion accompaniment, or as the basis of a fully orchestrated accompaniment— including bass and rhythm par ts — using the Auto Acc...

62 CVP-109/107/105/700 X Select a style. .......................................................................................................................... Select the desired style by pressing the appropriate left or right LCD button. Accompaniment Tempo• Whenever you select a style, the pre...

63 CVP-109/107/105/700 You will use the AUTO ACCOMPANIMENT buttons and the START/STOP buttons to select style variations and control style playback. VOLUME ST YLE START/STOP AUTO ACCOMPANI MENT SON G CONTROL GUIDE CONTROL MASTERVOLUME ACMP / SONG VOLUME MAX MIN MAX DEMO SWING/ JAZZ LATIN TRAD/WALTZ ...

64 CVP-109/107/105/700 To change the variation while the style is playing, press the button corresponding to the new variation. Using the PedalsYou can also use the left pedal to pausethe style or play a special fill-in pattern bysetting the LEFT PEDAL function (page190) to BREAK or BREAK FIL. ➔ The...

65 CVP-109/107/105/700 ■ Synchronized Start ............................................................................................ This method lets you start the style by simply playing a note or chord on the keyboard. Z Set the Synchronized Start function. • If the [SYNCHRO] button is pressed...

66 CVP-109/107/105/700 ■ Adding an Introduction ................................................................................. This function lets you embellish the start of a tune by adding an intro- duction. Z Set the introduction pattern. Select the variation to play the intro pattern as descri...

67 CVP-109/107/105/700 Z Press the [FADE IN/OUT] button. Using the PedalsYou can also use the left pedal to triggera fade-in or fade-out by setting the LEFTPEDAL function (page 190) to FADE IN/OUT. ➔ The lamp lights, and the Synchronized Start function (page 65) turns on automatically. X Start the s...

68 CVP-109/107/105/700 ■ Fading Out .................................................................................................................. You can have the style fade out and automatically stop by pressing the [FADE IN/OUT] button. Using the PedalsYou can also use the left pedal to trigg...

69 CVP-109/107/105/700 The Clavinova includes a sophisticated Auto Accompanimentsystem that can provide automated rhythm, bass and chordbacking for your performance in 157 different styles (147 styleson the CVP-107/700; 135 on the CVP-105), as well as 35different types of piano-only accompaniment. T...

70 CVP-109/107/105/700 You may want to select an accompaniment mode (page 71) before you start playing. If the accompaniment mode is set to your liking, youcan start the Auto Accompaniment as follows: Z Select a style. ....................................................................................

71 CVP-109/107/105/700 You can change the accompaniment mode (which selects the chord indication method), the split point, and other Auto Accompaniment set-tings in the ACCOMPANIMENT MODE display page. ■ Displaying the Auto Accompaniment Settings .................. Press [DIRECT ACCESS], then [ACMP ...

72 CVP-109/107/105/700 Accompaniment Modes • The Clavinova displays the names of the chords you play at the left edge ofthe main display, below the measurenumber. • The same accompaniment continues (even after you release the chord inthe left range) until you play the nextchord. ■ Single Finger Chor...

73 CVP-109/107/105/700 ■ Chords in Fingered 1 mode The chord types below can be played in Fingered 1 mode. For a fin-gering chart showing all chords in the example key of C, see page 15of the Reference Booklet. • Major • Sixth [6] • Major seventh [M7] • Major seventh flatted fifth [M7 ( b 5)] • Majo...

74 CVP-109/107/105/700 ■ Using the Synchronized Stop Function ................................... The SYNCHRO STOP function in the ACCOMPANIMENT MODE display automatically stops the Auto Accompaniment when you’re notholding down any keys to the left of the split point. Press the SYNCHRO STOP button ...

75 CVP-109/107/105/700 ■ Getting Help With Chords ......................................................................... The CHORD ASSIST function in the ACCOMPANIMENT MODE display uses the keyboard guide lamps to show you appropriatefingerings for chords. Chord AssistanceThe Chord Assistance fea...

76 CVP-109/107/105/700 When the TYPE function is highlighted, you can also use the data dial or the [–] and [+] buttons to select a chord type. The following chord types can be specified in the display: Major [Maj] Minor [m] Seventh [7] Minor seventh [m7] Minor seventh flatted fifth [m7 ( b 5)] Sixt...

77 CVP-109/107/105/700 The Clavinova has five accompaniment parts: Rhythm, Bass, Chord, Pad, and Phrase. Adjusting Individual Part Levels • The overall accompaniment playback volume can be adjusted using the[ACMP/SONG VOLUME] slider. • By adjusting the volume balance of the various parts, or setting...

78 CVP-109/107/105/700 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Playing with the Auto Accompaniment C Set the volume level. ..................................................................................... Part volume levels• Range: 0 (min.) — 127 (max.)• Basic setting: ...

79 CVP-109/107/105/700 The Clavinova has many other features and functions that makethe use of the Auto Accompaniment even more convenient andenjoyable. With these functions you can easily select panelsettings to suit a certain type of music, have the Clavinova playharmony to your melody line, or pr...

80 CVP-109/107/105/700 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Other Auto Accompaniment Functions X Sort the list, if necessary. ........................................................................ To display the panel setups for a specificstyle group, simply press the corr...

81 CVP-109/107/105/700 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Other Auto Accompaniment Functions At times you may find it difficult to control the Auto Accompaniment while playing a complicated piece of music that requires your full atten-tion on the keyboard. The Accompanimen...

82 CVP-109/107/105/700 C Enter a chord, if desired. • If Full Keyboard was last selected as the accompaniment mode (page 73),Fingered 1 is automatically selectedwhen you open the ACMP ASSISTdisplay. To indicate chords by a differ-ent method, move the cursor to the topof the first measure, then open ...

83 CVP-109/107/105/700 Style name End mark ➔ The names of the selected style and variation (or fill-in pattern) are shown at the top the display. B Set the entered data. When you have entered chord and style control data, press the SET button. ➔ A thick line segment appears at the cursor position to...

84 CVP-109/107/105/700 ■ Advanced Accompaniment Assistance ................................... Here are some other things you can do with Accompaniment Assist- ance data. ● Changing Part Volumes You can program volume changes for the Auto Accompaniment parts. Used judiciously, these can help you cre...

85 CVP-109/107/105/700 ■ Other Accompaniment Assistance Functions .................. Page 2 of the ACMP ASSIST display contains some useful functions that help you to enter Accompaniment Assistance data more efficiently. ● ALL DELETE function To delete all of the Accompaniment Assistance data and st...

86 CVP-109/107/105/700 ■ Other Ways to Use Accompaniment Assistance ............ ● Playing the Chords Yourself Since the Clavinova will respond to the chords you indicate in the left range of the keyboard when the [ACMP ON] lamp is lit, you can manu-ally change chords even if the Accompaniment Assis...

87 CVP-109/107/105/700 Harmony This feature adds harmony or embellishment notes to the melody you play using the main voice in the right range of the keyboard. The har-mony notes are produced automatically to match chords played withAuto Accompaniment. ■ Adding Harmony .................................

88 CVP-109/107/105/700 ■ Selecting a Harmony Type ........................................................................ You can change the type of harmony that is played using the HAR- MONY TYPE function in the HARMONY display. HARMONY TYPE function• Settings: See table on this page.• Basic setti...

89 CVP-109/107/105/700 ■ Changing the Harmony Speed ............................................................. You can change the speed of the harmony notes played by the Echo , Tremolo , and Trill harmony types using the SPEED function in the HARMONY display. SPEED function• Settings: 4, 6, 8, 1...

90 CVP-109/107/105/700 One Touch Setting ST YLE SWING/ JAZZ LATIN TRAD/WALTZ BALL–ROOM 16BEAT 8BEAT DANCE ROCK/ R&B BALLAD PIANIST COUNTRY DISK CUSTOM 1 2 3 4 BANK BANK REGISTRATION REGISTRATION/ONE TOUCH SETTING ONE TOUCHSETTING 1 2 3 4 BANK BANK REGISTRATION REGISTRATION/ONE TOUCH SETTING ONE ...

91 CVP-109/107/105/700 The Clavinova lets you create custom accompaniment stylesthat you can recall and play back at any time, just like the presets.Up to 12 custom styles can be maintained in the Clavinova’smemory at the same time, and any number can be saved to diskfor later reloading and use. Cre...

92 CVP-109/107/105/700 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Creating Your Own Styles C Select a source style. ................................................................................... Select a preset style that is close to the style you want to crea...

93 CVP-109/107/105/700 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ B Change the beat and section length. .......................................... If you want to create a style with a different time signature than the selected style, or change the number of measure...

94 CVP-109/107/105/700 ● Changing the section length: MEASURE function• Settings: 1 — 8• Basic setting: Depends on style. Clear section?• You will have to clear all parts of the currently selected section and startrecording from scratch if you changethe number of measures. • The “Clear section?” mes...

95 CVP-109/107/105/700 ➔ The part number is highlighted. If you have selected a part other than R1 or R2 , the “ Clear part ?” message will be displayed. Clear part?• If the source style is a preset style or a style loaded from an optional Style Filedisk, parts other than R1 and R2 mustbe cleared be...

96 CVP-109/107/105/700 When recording a drum kit voice in part R1 or R2 , you can clear a single drum instrument from the part by pressing the key correspondingto the instrument to be cleared while holding down the C1 key on thekeyboard. (The C1 key is labeled “CANCEL.”) The metronome timingguide ca...

98 CVP-109/107/105/700 Store the custom style. .............................................................................. The current tempo setting at the time thecustom style is stored becomes thepreset tempo for that style. Press the STORE LCD button in page 3 of the CUSTOM STYLE display to st...

99 CVP-109/107/105/700 In addition to the various functions described in the basic custom style recording procedure, above, the CUSTOM STYLE display pagesinclude several other functions that you may find useful when creatingcustom styles. ■ RECALL SECTION function ......................................

100 CVP-109/107/105/700 ■ Volume and Effects ......................................................................................... Page 4 of the CUSTOM STYLE display includes several functions that let you set the volume, reverb, chorus type and depth, effect (CVP-109/107/700), and pan for each ...

101 CVP-109/107/105/700 V Set the value or depth of the selected parameter. • The reverb and effect types used for the custom style are determined by thestyle that was selected as the basis forcustom style creation. • Normally the VALUE and chorus TYPE settings from the preset style are ini-tially s...

103 CVP-109/107/105/700 Once created, your original custom styles can be selected for play- back by pressing the [DISK/CUSTOM] button, then using the STYLE ▲ and ▼ LCD buttons, the data dial, or the [–] and [+] buttons to select the custom style you want to play. The selected style can then be playe...

104 CVP-109/107/105/700 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Creating Your Own Styles If you select the DELETE function, the “ Select style to delete ” message will be displayed: The amount of memory being used byeach style is displayed next to the stylename ...

105 CVP-109/107/105/700 You can load and play style files created in the Style File Formateither from optional Yamaha “Style File” disks, or from diskscontaining custom style files you’ve created yourself. Using Style Files ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ The Style File Format is...

106 CVP-109/107/105/700 To load a set of 12 style files that was created by selecting ALL as the memory number when the files were saved in Custom Style mode (seepage 101), press the ALL LOAD LCD button rather than the LOAD SINGLE button. X Select a style file. .........................................

107 CVP-109/107/105/700 It is not necessary to select a memory number when ALL LOAD is selected in step 1. Simply press OK to load or CANCEL to abort. If there is not enough memory to load the specified style file, the “ Not enough memory! Delete an unneeded style? ” mes- sage will be displayed. In ...

108 CVP-109/107/105/700 The Registration feature lets you store complete panel setupsthat you can recall whenever needed. A total of 20 setups (5banks containing 4 memories each) can be registered in theClavinova’s memory. CHAPTER 6: Registrations Using Registrations (Registering and Recalling Panel...

109 CVP-109/107/105/700 C Register the panel setup. .......................................................................... ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Using Registrations Registration Memory• Range: 1 — 4 (each bank)• Basic setting: None ...

110 CVP-109/107/105/700 ➔ The number and name of the recalled registration appear below and to the right of the style name in the main display. A pencil icon will appear to the right of the registration name in the display as soon as any change is made to the panel buttons or settings.The pencil ico...

111 CVP-109/107/105/700 X Indicate the categories to be frozen. ............................................ Freeze Categories• Settings: ON, OFF• Basic setting: ON (ACMP SETTING) OFF (others) • Backup of last settings: ON Use the left and right LCD buttons (just the left LCD buttons on the CVP-105)...

113 CVP-109/107/105/700 CHAPTER 7: Song Control Song Playback ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ The Clavinova can play back songs recorded using the SongRecord function (page 130), as well as song data included onvarious commercially available software disks. You can also playalong...

114 CVP-109/107/105/700 ➔ The DISK IN USE lamp lights while the Clavinova reads and iden- tifies the disk. Once the disk has been identified, the SONG PLAY [MAIN] display (display page 1) appears and the [SONG] lamp lights. If a song disk has been inserted but the Song Play mode is not en- gaged, pr...

115 CVP-109/107/105/700 Use the PAGE [ < ] and [ > ] buttons to call up the SONG PLAY [LIST] display (display page 3), to view the entire list of the song namesin the disk. The desired song can be selected easily by using the left/rightLCD buttons, data dial, or [–] and [+] buttons. You can al...

116 CVP-109/107/105/700 ● Adjusting the Tempo The playback tempo of the song can be changed as desired. (See page 27.) The preset tempo for the selected song can be restored at any timeby simultaneously pressing the TEMPO [–] and [+] buttons. Usually the tempo is indicated by numbers. However in cas...

117 CVP-109/107/105/700 The 1/RIGHT (right hand), 2/LEFT (left hand) and ORCH (accom- paniment) buttons in the SONG PLAY [MAIN] display can be used toturn playback of the corresponding parts on or off. The buttons are high-lighted when the parts are turned on. For example, you can turn off theright-...

118 CVP-109/107/105/700 X Select the desired track for playback (PLAY/OFF, SOLO). Select the track by using the TRACK < and > buttons, the data dial, or the [–] and [+] buttons. ➔ The selected track is indicated by an underline mark. Turn playback on or off for the selected track by pressing t...

119 CVP-109/107/105/700 The playback voice can only be changedwhen playback is stopped at the top ofthe song. ■ Selecting Voices for 1/RIGHT and 2/LEFT Parts ................ The playback voices for the 1/RIGHT and 2/LEFT parts can be se- lected in the SONG PLAY [L&R VOICE] display. Press L &...

120 CVP-109/107/105/700 To adjust the playback volume, voice, and pan settings, as well as the reverb, chorus, and effect depth for individual tracks, press the [MIXER]button while in the Song Play mode to call up the MIXER display. Adjustment of Track Settings You can use the MIXER display to set t...

121 CVP-109/107/105/700 Z Select the track to be changed. ......................................................... Select the desired track by pressing TRACK < or > . Selecting TTL (Total) will change the overall settings of the song rather than the set-tings of individual tracks. Press the r...

122 CVP-109/107/105/700 The Clavinova has convenient repeat functions that let you repeatedly play back the same song or sections within the song. This function isuseful when you want to practice a difficult phrase. Select the desired mode from the available four Repeat modes from the SONG PLAY [REP...

123 CVP-109/107/105/700 ■ 1 Song Repeat ........................................................................................................ When 1 SONG is selected by pressing the REPEAT MODE ▼ or ▲ button, any song selected and played as described above will play repeat-edly until stopped. Lea...

124 CVP-109/107/105/700 ■ Pause ............................................................................................................................. Press the [PAUSE] button during song playback to temporarily stop song playback. Press [PAUSE] again or the [PLAY/STOP] button toresume playba...

125 CVP-109/107/105/700 The Clavinova has a special Guide function which allows you topractice by using the appropriate disk software. The “piano roll”display and the keyboard guide lamp indicate which keys youshould play, and when you should play them. You can evenpractice at your own pace since th...

126 CVP-109/107/105/700 ■ Practicing Phrase-by-Phrase with the Playback:Sound Repeat ....................................................................................................... In the Sound Repeat method, the Clavinova plays back a short phrase. Listen to the phrase and practice. As soon...

127 CVP-109/107/105/700 X Select the Guide method. ......................................................................... Press one of the GUIDE CONTROL buttons: [EASY PLAY], [NEXT NOTE] or [SOUND REPEAT]. ➔ The lamp of the corresponding button lights. Turning Off the Keyboard GuideLampsThe keybo...

128 CVP-109/107/105/700 • Playback tempo can be set to any desired value after a song has beenselected by using the TEMPO [–] and[+] buttons. • The Guide function may not work properly with software which was notproduced for independent left- andright-hand playback. • Since the Guide phrases used in...

130 CVP-109/107/105/700 The Clavinova features comprehensive song recording func-tions that allow you to record your own performances to floppydisks. Four recording methods are available: Quick Recording(page 132), which lets you record quickly and easily; TrackRecording (page 135), with which you c...

131 CVP-109/107/105/700 Song Recording ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Before you can record to the included blank disk, you will have to format it. Commercially available blank disks must also be formattedfor use. You can use the Format func...

132 CVP-109/107/105/700 Z Insert a formatted disk. ............................................................................... Make sure that the disk’s write protect tab is set to the “write” posi- tion, then insert the disk face up with the shutter forward until it clicksinto place. Quick Reco...

133 CVP-109/107/105/700 C Select the Song Record mode. .............................................................. Press the [REC] button. ➔ The [REC] lamp lights and the QUICK RECORD display (Record mode page 1) appears. Call up page 1 by using the PAGE [ < ] and [ > ] buttons if the lamp ...

134 CVP-109/107/105/700 B Select the desired voices and style, etc. ................................ Select the voices and accompaniment style and set the tempo in the normal way, and other settings needed. (If you want to try out the se-lected voices, style, tempo, or other settings, be sure to do ...

135 CVP-109/107/105/700 M Stop recording. ................................................................................................ Press the [PLAY/STOP] button. ➔ Recording stops. When the recorded data has been written to disk, the [REC] lamp goes out and the SONG PLAY display ap- pears. If...

136 CVP-109/107/105/700 C Select the desired track for recording. ...................................... Press the TRACK < and > buttons or use the data dial or [–] and [+] buttons to select the track. • Track 10 (and 9, in some cases) can only be used to record the rhythmsound of the accompan...

137 CVP-109/107/105/700 V Set all performance features as required. .......................... After setting the tracks to be recorded, set up all necessary perform- ance features as required: voice, accompaniment style, tempo, reverb,etc. B Start recording. ............................................

138 CVP-109/107/105/700 N Stop recording. ................................................................................................ Press the [PLAY/STOP] button. ➔ Recording stops. The [REC] lamp goes out when the data has been written to the disk, and the SONG PLAY display appears. If you pr...

139 CVP-109/107/105/700 X Pause before the punch-in point. ................................................ Press the [PAUSE] button to pause play back a bit before the point at which you want to start recording. Leave a measure or more beforethe punch-in point so you’ll be able to grasp the timing ...

140 CVP-109/107/105/700 B Select the punch-in mode. ....................................................................... Select the desired punch-in mode with the fourth LCD button. Two modes are available, as described below. 1ST KEY Recording begins as soon as the first key is played, afterPunc...

141 CVP-109/107/105/700 The Chord Sequence function lets you enter Auto Accompani-ment data step-by-step according to chord names. You can usethis function to record the accompaniment part without having toplay the song in time with the rhythm or at a certain tempo. ➾ Select the RECORD EDIT 1 displa...

142 CVP-109/107/105/700 • The Chord Sequence data will auto- matically replace any previous data inthe Auto Accompaniment and rhythmtracks that was recorded in the QuickRecord or Track Record modes. • Up to 999 measures can be recorded using the Chord Sequence function. • The chord input resolution ...

143 CVP-109/107/105/700 V Enter and set the chords and/or style changes. .......... To enter a chord, either play the chord with appropriate fingering in the left range of the keyboard (lower than the split point), or highlight ROOT or TYPE in the LCD display and use the data dial or [–] and [+] but...

144 CVP-109/107/105/700 B Stop recording. .................................................................................................... When all recording has been finished, select page 2 of the CHORD SEQUENCE display, then press the END MARK and SET buttons and input an “end mark” which dete...

146 CVP-109/107/105/700 The Step Edit function gives you a convenient way to modify theindividual notes and control changes that make up a song you’verecorded. This function not only lets you change notes, it alsoallows you to adjust the timing, length, and velocity with whichthe notes are played. Y...

147 CVP-109/107/105/700 X Enter the Record mode. ......................................................................... Use the SONG function to select the song you want to edit (see page 132), then press the [REC] button. SON G CONTROL PAUSE REW FF REC PL AY / STOP ➔ The Record mode display appe...

148 CVP-109/107/105/700 ➔ The track selector is highlighted, and the event data for the se- lected track is displayed. N Select an event to edit. ............................................................................... V Select a track to edit. ...................................................

149 CVP-109/107/105/700 CURSOR functions• Each of the CURSOR functions at the bottom of the STEP EDIT display corre-sponds to one or more parameters in theevent list. • The number and type of CURSOR func- tions displayed depends on the type ofevent selected. (See the list on page 151for details.) • ...

150 CVP-109/107/105/700 Every event contains three types of data: the timing, the event type, and at least one event-specific parameter. Use the procedures below tochange an event’s timing or type. ■ Changing the Timing of an Event ..................................................... Common Paramet...

151 CVP-109/107/105/700 Although every event has at least one event-specific parameter, some event types require that several parameters be set. The tablesbelow list the CURSOR functions that are used to select event-specificparameters, and the number of parameters selected by each. Event-specific P...

152 CVP-109/107/105/700 ■ Changing the Time Signature ............................................................... Time SignatureSettings: 1/2 — 4/2, 1/4 — 8/4,1/8 — 16/8,1/16 — 16/16 Select the Time Signature event you want to edit in the event list for the SYSTEM track. ➔ The TIME function is d...

153 CVP-109/107/105/700 ● Gate Time Beat valueRange: 0 — 99Clock valueRange: 0 — 479 The gate time setting determines the length of the note. You can set the gate time either by using the beat and clock parameters, just as youwould to set the location of the note event (see page 152), or by selectin...

154 CVP-109/107/105/700 ● Control Number ● Control Data Control Number• Settings: See table at left. The control number setting determines which controller’s setting is changed by the event. Use the CONTROL NUMBER button to select this parameter, then use the data dial or the [–] and [+] buttons to ...

155 CVP-109/107/105/700 ■ Changing the Voice Selection ........................................................... • You can select a different voice in the same bank as the currently selectedvoice using a single Program Changeevent. • To select a voice in a different bank, the Program Change event ...

156 CVP-109/107/105/700 ■ Applying Aftertouch to All Notes ....................................................... Aftertouch DataRange: 0 — 127 Select the Channel Aftertouch event you want to edit in the event list for the appropriate track ( 1 through 16 ). ➔ The DATA function is displayed above t...

157 CVP-109/107/105/700 ● Polyphonic Aftertouch Data Aftertouch Data• Range: 0 — 127 The polyphonic aftertouch data setting determines the amount of aftertouch that is applied to the specified note. Use the DATA button to select the polyphonic aftertouch data parameter, then use the data dialor the ...

158 CVP-109/107/105/700 In the preceding subsections of this chapter you learned how to edit the various data parameters that make up an event. The Step Edit modealso lets you add, delete, copy, and move events. ■ Adding an Event .........................................................................

159 CVP-109/107/105/700 X Delete the selected event. If you don’t see the DEL function at the rightedge of the display, press the SHFT button(the bottom right LCD button) to display it. Press the DEL button (the middle right LCD button). ➔ The selected event is removed the event list. ■ Moving or Co...

160 CVP-109/107/105/700 X Select the event to be moved or copied. Select the event you want to move or copy as described in steps 5 and6 of the basic editing procedure (page 148). ➔ The selected event is highlighted. ➾ If you want to move or copy a series of two or more consecutive events, press the...

161 CVP-109/107/105/700 As you’re editing song data in Step Edit mode, you may at times find that the sheer number of events makes it difficult to locate the datayou’re looking for. The Clavinova lets you simplify the process bylimiting the types of events that are displayed in the event lists. Z Op...

162 CVP-109/107/105/700 Page 2 of the STEP EDIT display contains functions that let you record music one note at a time. Use the following procedure to add newnote data to a song that you’re editing in Step Edit mode. Z Open the STEP EDIT [NOTE RECORD] page. ..................... Recording Music in ...

163 CVP-109/107/105/700 V Select a note style. ....................................................................................... Note Style• Setting: (normal), (staccato), (tenuto) • Basic setting: Press the second right LCD button to display the playing style for the note you are going to rec...

164 CVP-109/107/105/700 ● To record a rest: Press the bottom right LCD button. Checking your Changes• You can press the [PLAY/STOP] but- ton at any time while you’re recordingnote data to check the changes you’vemade. Playback begins from the top ofthe measure that includes the currentlyhighlighted ...

165 CVP-109/107/105/700 Use the following procedure to save the data you have edited or re- corded in Step Edit mode: Z Open the STEP EDIT page, if necessary. ................................ If you are currently using page 2 or 3 of the STEP EDIT display, press the PAGE [ < ] button once or twic...

166 CVP-109/107/105/700 The Record mode has a number of other convenient editing functions that provide even greater control over the song data.The Record Edit functions include: Song Name, which lets youname a recorded song file; Track Edit, which gives you a varietyof track-related editing control...

167 CVP-109/107/105/700 Z Enter the desired name. ......................................................................... Use the CHAR > button to move the underline cursor to the desired character position in the file name display. (File names can be up to 12characters in length). ➾ Use the da...

168 CVP-109/107/105/700 Z Specify the two tracks to be mixed. .............................................. Press the TRACK A and TRACK B buttons to highlight the correspond- ing functions, and use the data dial or [–] and [+] buttons to select thenumbers of the two tracks to be mixed. The voices w...

169 CVP-109/107/105/700 X Execute the Delete operation. .......................................................... Press the DELETE button. When the “ Are You Sure? ” message is displayed, press YES to execute the Delete operation or NO to cancel. The DELETE function will be replaced by the UNDO fun...

170 CVP-109/107/105/700 C Execute the Quantize operation. ...................................................... Press the QUANTIZE button. When the “ Are you sure? ” mes- sage is displayed, press the YES button to execute the Quantize operation or NO button to cancel. The QUANTIZE function will be ...

171 CVP-109/107/105/700 Z Select the track to be edited. ............................................................ Select the track whose parameters you wish to change by pressing the TRACK < or > button. If TTL (Total) is selected, any changes will affect the entire song rather than an ind...

172 CVP-109/107/105/700 B Exit the Initial Edit function. .................................................................. To do this, press the [REC] button. ➔ The [REC] lamp goes out and the Initial Edit operation is com- pleted. You can also exit the Initial Edit function by pressing the [EXIT]...

173 CVP-109/107/105/700 The Vocal Harmony Memory function lets you save the current Vo- cal Harmony function settings to disk so that they will automatically berestored whenever you play back the song being edited. Z Set up the Vocal Harmony function. ......................................... Vocal ...

174 CVP-109/107/105/700 The Clavinova has about 26 KB of inter nal memor y that you canuse to record a limited amount of song data — approximately 2,500notes, if no other data is recorded — without using a floppy disk. About the CVP MEMORY Song • Chord Sequence data (page 141) cannot be recorded to ...

175 CVP-109/107/105/700 The Vocal Harmony function of the CVP-109/107/700 can auto-matically produce up to two harmony vocals based on a singlelead vocal. There are 42 different vocal harmony types, providinga variety of different harmonization effects. Vocal Harmony canalso alter the pitch and timb...

176 CVP-109/107/105/700 C Sing along with the Clavinova. .......................................................... Vocal Harmony SamplesYou can try out the Vocal Harmony feature asyou play back “3. Lyric Demo (BeautifulDreamer)” in the Demo mode (page 14) and“O Come All Ye Faithful” on the Music Da...

177 CVP-109/107/105/700 ■ Changing the Vocal Harmony Type ................................................. Vocal Harmony Type• Settings: See table on page 13 in the Reference Booklet. • Basic setting: MenChoir You can change the vocal harmony type selection in page 1 of the VOCAL HARMONY display. U...

178 CVP-109/107/105/700 ■ Setting the Vocal Harmony Chorus Depth .............................. CHORUS• Range: 0 (no effect) — 127 (max.)• Basic setting: 0 When the Vocal Harmony function is on, the Clavinova applies a cho- rus effect — selected by the CHORUS TYPE setting in the CHORUS display (page...

179 CVP-109/107/105/700 ■ Changing the Vocal Harmony Effect Type ............................... EFFECT TYPE• Range: See table on page 219.• Basic setting: KARAOKE1 When the Vocal Harmony function is on, the Clavinova applies an effect to the lead and harmony vocal parts. This effect is separate fro...

180 CVP-109/107/105/700 ■ Correcting the Pitch of the Lead Vocal ....................................... ■ Changing the Singer’s Apparent Gender ................................. PITCH CORRECT• Settings: OFF, ON• Basic setting: Depends on vocal har- mony type. When the GENDER TYPE function (page 181...

181 CVP-109/107/105/700 ■ Changing the Harmony Mode ............................................................... HARMONY MODE• Settings: AUTO, CHORDAL, VOCODER • Basic setting: AUTO The majority of the Clavinova’s vocal harmony types can produce har- mony notes using one of two vocal harmony mode...

182 CVP-109/107/105/700 If AUTO is selected as the harmony mode, the Clavinova will produce harmony notes in either Vocoder or Chordal mode, based on the mostappropriate harmony part. The harmony part is selected automaticallyaccording to the current performance method, as shown below: If you select...

183 CVP-109/107/105/700 • The HARMONY PART value may change automatically if the HARMONYMODE function is set to AUTO and theperformance method is changed (seepage 181). • The HARMONY PART function is not available when the current vocal har-mony type uses either Chromaticmode or Detune mode as the v...

184 CVP-109/107/105/700 Once you have set up the Vocal Harmony function according to your preferences, you may want to save those settings for future use, or in-clude them as part of a song that you will want to sing along with later. ■ Registering Vocal Harmony Data ...................................

185 CVP-109/107/105/700 The Vocal Harmony Modes The vocal harmony mode determines how the Vocal Harmony function applies harmony notes to the lead vocal. Refer to the list of vocal harmony types on page 13 of the Reference Booklet todetermine which vocal harmony mode is used by a given vocal harmony...

186 CVP-109/107/105/700 The Function mode provides various advanced functions that,for example, let you make various MIDI settings, or give yougreater, more convenient control over disk-related operations.These sophisticated functions let you customize the Clavinovato your own musical needs and pref...

187 CVP-109/107/105/700 ■ Using the Utility Functions ....................................................................... As the table on the preceding page shows, the utility functions are divided among 17 display pages (16 pages on the CVP-105). Use thefollowing procedure to display the page c...

188 CVP-109/107/105/700 ■ Tune .................................................................................................................................... Keyboard ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ FUNCTION [KEYBOARD 1] Display — page 1 TUNE• Range: 414...

189 CVP-109/107/105/700 KEY TOUCH• Settings: See table at left.• Basic setting: NORMAL FIXED VELOCITY• Range: 1 — 127• Basic setting: 76 ■ Key Touch & Fixed Velocity ...................................................................... FUNCTION [KEYBOARD 2] Display — page 2 Velocity• The amount...

190 CVP-109/107/105/700 ■ Left Pedal & Glide Range ........................................................................... Pedal ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ FUNCTION [PEDAL] Display — page 3 LEFT PEDAL• Settings: See table at left.• Basic...

191 CVP-109/107/105/700 ■ Right Pedal & Bend Range (CVP-109/107/700) ................... RIGHT PEDAL• Settings: See table at left.• Basic setting: Depends on main voice. This function lets you set the right pedal of the CVP-109/107/700 to one of two damper modes, or to control upward and downwar...

192 CVP-109/107/105/700 ■ Registration, Setup & Acmp Assist Files .................................. You can use the functions on this page to load, save, delete, and re- name data files containing registration data (page 108), panel setup data,or Accompaniment Assistance data (page 81). Before ...

193 CVP-109/107/105/700 When saving registration data, the REGIST setting specifies which memory location(s) will be saved to disk. When loading data, the REGIST setting specifies how the registration data will be loaded, as shown below: You can delete or rename any registra-tion file on the disk, r...

195 CVP-109/107/105/700 ■ DELETE ......................................................................................................................... When you select DELETE , the Delete function display will appear. First, select the desired file to be deleted. Press either of the two leftmost ...

196 CVP-109/107/105/700 ■ Song Copy & Disk Copy .............................................................................. FUNCTION [DISK 2] Display — page 5 The Song Copy and Disk Copy functionscannot be executed while the [RECORD]lamp is lit. Exit the Song Record modebefore attempting to c...

198 CVP-109/107/105/700 ■ Song Delete ............................................................................................................... FUNCTION [DISK 3] Display — page 6 The Song Delete function cannot beexecuted while the [RECORD] lamp is lit.Exit the Song Record mode before at-tempt...

199 CVP-109/107/105/700 ■ Song Data Transform ....................................................................................... FUNCTION [DISK 4] Display — page 7 The Song Data Transform function can-not be used while the [SONG] lamp is lit.Exit the Song mode before attempting totransform song...

200 CVP-109/107/105/700 ■ Disk Format .............................................................................................................. Floppy disks must be correctly formatted before the Clavinova can use them for data storage. If you insert a new, unformatted disk (or a diskthat has a...

201 CVP-109/107/105/700 ■ Send Channel (Keyboard) ......................................................................... ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ MIDI FUNCTION [MIDI 1] Display — page 9 SEND CH• Settings: OFF, 1 — 16• Basic setting: See t...

202 CVP-109/107/105/700 ■ Synchronization .................................................................................................... MIDI SYNC.• Settings: INT. (internal clock), EXT. (external clock) • Basic setting: INT. The playback tempo of a song or style is normally controlled by the ...

203 CVP-109/107/105/700 ● Control Change Messages CONTROL• Settings: Tx&Rx (transmitted/received), OFF • Basic setting: Tx&Rx Control change messages are used for various non-keyboard perform- ance controls, such as the damper pedal, or for expressive control of thesound of a connected MIDI ...

204 CVP-109/107/105/700 Z Select the channel. Use the CHANNEL < and > LCD buttons to select the number of the channel you want to enable or disable. ➔ An underline cursor is displayed below the selected channel number. X Press the rightmost LCD button. ➔ When the selected channel is enabled, O...

205 CVP-109/107/105/700 ■ Send Channel (Accompaniment/Harmony) ............................ SEND CH (ACMP&RHY)• Settings: OFF (not transmitted), 9–16 (transmitted) • Basic setting: OFFSEND CH (HARMONY)• Settings: OFF (not transmitted), 6–8 (transmitted) • Basic setting: OFF When the ACMP & R...

206 CVP-109/107/105/700 ■ Backup ............................................................................................................................ Backup ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ FUNCTION [BACKUP 1] Display — page 13 Backup functions• S...

207 CVP-109/107/105/700 ■ Recall ................................................................................................................................ This function can be used to recall the initial factory settings (basic settings) for a group of parameters, or for all parameters at once...

208 CVP-109/107/105/700 The Micro Tuning Feature makes it possible to individually tune each key of the keyboard. The created tuning can be saved to a disk andloaded whenever necessary. The currently loaded custom tuning can beturned on or off at any time by using the leftmost LCD button in thisdisp...

209 CVP-109/107/105/700 X Select the desired file operation. Use the second LCD button from the right to select the desired fileoperation: LOAD , SAVE , DELETE or NAME . C Press the START button. After the START button is pressed, the display corresponding to the selected file operation appears.The ...

210 CVP-109/107/105/700 Z Select PRESET with the leftmost LCD button. ➔ The following display appears: X Select a scale. Press the SCALE ▼ or ▲ to highlight the parameter, then use the data dial or [–] and [+] buttons to select the temperament type.When selecting temperaments other than equal ( EQUA...

211 CVP-109/107/105/700 C Set the tuning. LOAD See page 193. SAVE See page 194. DELETE See page 195. NAME See page 195. TUNE• Range: -64 cent — +63 cent• Basic Value: 0 (all keys) Set the pitch by pressing the TUNE ▼ or ▲ buttons, or by using the data dial or [–] and [+] buttons. You can play the ke...

212 CVP-109/107/105/700 ■ Character Size ........................................................................................................ The functions on this page let you set the display characteristics for the lyrics and chords (page 129) that are output to a television or videomonitor co...

213 CVP-109/107/105/700 The Clavinova is equipped with jacks that let you connect a variety of audio devices. Youcan connect headphones, a stereo system, or PA equipment for audio output, as well asinput from a tone generator or other instrument. The CVP-109/107/700 also hasmicrophone and video jack...

214 CVP-109/107/105/700 You can connect the Clavinova to a wide range of audio equipment by using the AUX IN and AUX OUT jacks, which are located at the left endof the unit on the underside (CVP-109/107/700) or rear panel (CVP-105). ■ AUX IN Jacks .......................................................

215 CVP-109/107/105/700 ■ AUX OUT Jacks .................................................................................................... By connecting audio cables to the AUX OUT jacks as shown here, you canoutput the sound of the Clavinova to astereo system, amplifier, mixing console,or recordi...

216 CVP-109/107/105/700 Use MIDI cables to connect the MIDI terminals on the Clavinova to other MIDI devices. The Clavinova’s MIDI terminals are located at the leftof the unit on the underside (CVP-109/107/700) or rear panel (CVP-105). Tone generators or other devices to be controlled by the Clavino...

217 CVP-109/107/105/700 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Data Connections ■ Connecting to an Apple Macintosh or Compatible Com- puter ..................................................................................................................

218 CVP-109/107/105/700 APPENDICES Effect Type Lists ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 216 The tables in this appendix contain descriptions of the variousreverb, chorus, and effect types that are available for use on theCVP-109/107/105/700. XG REVERB, XG CHORUS, and XG EFFECT (...

220 CVP-109/107/105/700 218 Effect Type List Type Description 109/107/700 105 FLANGER1 FLANGER2 FLANGER3 FLANGER4 SYMPHONIC SYMPHONIC1 SYMPHONIC2 PHASER Modulation effect created by cyclical phase shifting ROTARY SP1 ROTARY SP2 ROTARY SP3 ROTARY SP4 ROTARY SP5 TREMOLO1 TREMOLO2 GTR TREMOLO Tremolo e...

221 CVP-109/107/105/700 219 Messages ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ● General (Panel Operation) This message appears when you try to perform an operation (such as selection of a styleor Music Database setup) that cannot be performed during playback. ➾ Stop song p...

223 CVP-109/107/105/700 ● General (Memory-related) This message appears when the Clavinova’s memory has become full while recording asong in the internal memory (page 174). If this happens, recording will stop and any datarecorded up to that point will be saved automatically.This message is also dis...

224 CVP-109/107/105/700 ● Step Edit This message appears if you try to record note data or perform a cut, copy, or paste opera-tion on the SYSTEM track (page 146) while editing a song with the Step Edit function. ➾ Select a different track (1 through 16) and try the operation again. ○ ○ ○ ○ ○ ○ ○ ○ ...

225 CVP-109/107/105/700 This confirmation prompt appears when you execute the Vocal Harmony Memory functionof the CVP-109/107/700 (page 173) to save the current Vocal Harmony settings with thesong being edited in Song Record mode. ➾ Select YES to save the Vocal Harmony settings. Press CANCEL to retu...

226 CVP-109/107/105/700 ● Song Data Conversion This message appears if you attempt to convert song data that has been saved on a 2HDdisk. (See page 199.) ➾ Press OK and copy the song data to be converted to a 2DD disk, then perform the data conversion using the 2DD disk. Following conversion of the ...

227 CVP-109/107/105/700 Problem The Clavinova does not turn on. A click or pop is heard when thepower is turned on or off. Noise is heard from the Clavinova’sspeakers. The display is too bright or too darkto read. The keyboard volume is low com-pared to that of the Auto Accompa-niment or song playba...

229 CVP-109/107/105/700 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ MIDI and Data Compatibility ■ MIDI MIDI (Musical Instrument Digital Interface) is a worldwide standard communication interface that allows MIDI-compatiblemusical instruments and equipment to share musical informationand control one another.• Depend...

230 CVP-109/107/105/700 Index ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ A Accompaniment Assistance ................. 81–86Accompaniment Mode ................... 69, 71–73Accompaniment Off Events ....................... 84accompaniment styles ................ s...

WARNING- When using any electrical or electronic prod- uct, basic precautions should always be followed. These pre-cautions include, but are not limited to, the following: 1. Read all Safety Instructions, Installation Instructions, Special Message Section items, and any Assembly Instructionsfound in...