Yamaha CLP-30 - Manuals

5 If you will be using sheet music with your Clavinova, raise the music stand built into its toppanel by lifting the rear edge of the music stand, thenflip down the music stand braces and engage themwith the corresponding recesses. The music stand can be lowered after slightly lift- ing it and foldi...

6 Connections 2 AUX OUT R and L/L+R Jacks AUX. OUT L/L+R R Stereo System These jacks are intended for use with an external tone generator module such as the Yamaha DOM-30 Disk Orchestra Module. The stereo outputs from the exter-nal tone generator module are connected to the OPTIONAL IN L and R jacks...

7 Z Turn Power On After making sure that the Clavinova’s AC plug is properly inserted into a convenient AC wall outlet, press the [POWER] switch located to the leftof the keyboard to turn the power ON. When the power is turned ON, the [PIANO] voice selector LED will light (the PIANO voice is automat...

8 The Dual Mode The DUAL mode makes it possible to play two voices simultaneously across the entire range of the key- board. To activate the DUAL mode simply press two voice selectors at the same time (or press one voiceselector while holding another). The voice indicators of both selected voices wi...

9 Pitch Control ● Tuning Up Z To tune up (raise pitch), hold the E0 and F0 keys simultaneously. X Press any key between C3 and B3. Each time a key in this range ispressed the pitch is increased by approximately 1.6 cents, up to a maxi-mum of 50 cents above standard pitch. C Release the E0 and F0 key...

10 DOM-30 MIDI Cable MIDI IN MIDI OUT DRC-20 Data Being Recorded Playback Data MIDI IN MIDI IN MIDI OUT MIDI OUT ● A Brief Introduction to MIDI MIDI, the Musical Instrument Digital Interface, is a world-standard com- munication interface that allows MIDI-compatible musical instruments andequipment t...

11 DRC-20 Tone Generator MIDI IN MIDI IN MIDI OUT MIDI THRU ● MIDI Transmit & ReceiveChannel Selection The MIDI system allows transmission and reception of MIDI data on 16 different channels. Multiple channels have been implemented to allow se-lective control of certain instruments or devices co...

12 MIDI Functions Other MIDI Functions The MIDI functions listed to the right are engaged by holding down the [MIDI/TRANSPOSE] button and press-ing the corresponding voice selector. Full details are givenin the following pages. Function CLP-121 S Voice Selector Local Control ON/OFF [PIANO] Program C...

13 DRC-20 MIDI IN MIDI IN MIDI OUT MIDI OUT Normally the Clavinova will respond to MIDI control change data received from an external MIDI device or keyboard, causing the selected Clavinova voice to be affected by pedal and other “control” settings receivedfrom the controlling device. The Clavinova ...

14 DOM-30 LINE OUT R L OPTIONAL IN L R MIDI OUT MIDIIN MIDI Functions In the MIDI split mode one section of the Clavinova keyboard is used to play a Clavinova voice in the normal way, while the remaining section is used to play a second MIDI keyboard or tone generator such as the YamahaDOM-30 Disk O...

15 1. No Sound When the Power is Turned ON ● Options BC-7 Bench A comfortable bench styled to match your Yamaha Clavinova. HPE-6 Stereo Headphones High-performance lightweight dynamic headphones with extra-soft ear pads. KC-763 Key Cover A convenient way to keep your keyboard clean and dust-free. Is...

58 1 2 Keyboard Stand Assembly Note: We do not recommend attempting to assemble the Clavinova alone. The job can be easily accomplished, how-ever, with only two people. Z Open the box and remove all the parts. On opening the box you should find the parts shown in the illustration to the above. Check...

59 3 4 Assemblage du support de clavier Remarque: Nous ne vous conseillons pas d’essayer d’assembler le Clavinova seul. Toutefois, ce travail peut êtrefacilement exécuté par deux personnes. Z Ouvrez le carton et retirez toutes lespièces Les pièces indiquées sur l’illustration devraient toutes se tro...

60 5 B Install the main unit (A). Place the main unit on the side panels (D) with the screws on its bottom panel (toward the rear of the mainunit) just behind the grooves in the bracket located at thetop of the side panels (D), then slide the keyboard forwarduntil it stops. WATCH YOUR FINGERS WHEN D...

61 6 7 B Posez le clavier (A) Placez le clavier sur les panneaux latéraux (D), avec les vis de son panneau inférieur (situées vers l’arrière du cla-vier) placées immédiatement derrière les rainures desferrures situées à la partie supérieure des panneauxlatéraux (D), puis faites glisser le clavier ve...

63 92-469 1 ENVIRONMENTAL ISSUES: Yamaha strives to pro-duce products that are both user safe and environmentallyfriendly. We sincerely believe that our products and theproduction methods used to produce them, meet thesegoals. In keeping with both the letter and the spirit of thelaw, we want you to ...

64 WARNING- When using any electrical or electronic prod- uct, basic precautions should always be followed. These pre-cautions include, but are not limited to, the following: 1. Read all Safety Instructions, Installation Instructions, Special Message Section items, and any Assembly Instructionsfound...

66 F C C I N F O R M AT I O N ( U. S . A . ) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifica-tions not expressly approved by Yamaha may void your authority, granted by the FCC, to u...