Yamaha CL1 - Manuals

Input channels V1.7 Supplementary Manual 5 Input channels Additional head amp setting functions when changing the input patching When you change the input patching, you can now choose whether the HA (Head Amp) settings of the port you patched will be used, or whether the HA settings of the channel w...

Grouping and linking V1.7 Supplementary Manual 7 Grouping and linking Improved display of DCA group / MUTE group names In the DCA/MUTE GROUP ASSIGN MODE popup window, the DCA group names and mute group names can now be displayed. ■ Editing and displaying DCA group names 1. In the Function Access Are...

Grouping and linking V1.7 Supplementary Manual 8 ■ Editing and displaying mute group names Mute group names can be specified in the same way as for DCA groups. 1 NAME EDIT button Edits the group name of the currently selected MUTE group. The registered group name is shown in the RECALL SAFE MODE pop...

Grouping and linking V1.7 Supplementary Manual 9 Improvements in channel link display A link indicator has been added to the CH LINK MODE popup window, making it easier to determine the currently-assigned link group. ■ Accessing the CH LINK MODE popup window 1. In the Function Access Area, press the...

Monitor and Cue V1.7 Supplementary Manual 10 Monitor and Cue Extended cue functions The cue monitor level range has been expanded to –30 dB – +20 dB. Make this setting in the CUE popup window. ■ Accessing the CUE popup window 1. In the Function Access Area, press the MONITOR button to access the MON...

Graphic EQ, Effects, and Premium Rack V1.7 Supplementary Manual 11 Graphic EQ, Effects, and Premium Rack Improvements in popup window operation In the EFFECT popup window, GEQ popup window, and PREMIUM RACK popup window, you can now use the [SEL] keys to switch channels. In the EFFECT popup window, ...

I/O device and external head amp V1.7 Supplementary Manual 12 I/O device and external head amp Added display functions for device status You can now use the touch screen to verify the status of a connected CL series or R-series unit (except the Ro8-D) or the Dante status.In order to verify the statu...

I/O device and external head amp V1.7 Supplementary Manual 13 Messages Error, warning, and information messages are displayed. Messages are also displayed in the Dante Controller Error Status field.Each indicator lights or flashes as described below: ■ Error Messages The SYSTEM indicators will remai...

I/O device and external head amp V1.7 Supplementary Manual 14 If the green indicator is flashing, the unit is the clock master.If the green indicator is lit, the unit is the clock slave and the clock is synchronized. ■ Information Messages The status is shown by the lit/flashing state of the indicat...

User settings V1.7 Supplementary Manual 15 User settings Added functions for the GAIN/PAN/ASSIGN knobs (assignable encoders) Functions have been added to the assignable encoders in SENDS ON FADER mode. ■ If ASSIGN is selected by the top panel [GAIN/PAN/ASSIGN] key Use the assignable encoders to adju...

User settings V1.7 Supplementary Manual 16 ■ Focus function For the focus function, you can specify for each scene whether custom bank settings will be recalled (loaded). 1. Press the SCENE field of the Function Access Area. 2. Press the FOCUS tab at the bottom of the SCENE LIST window. Custom bank ...

User settings V1.7 Supplementary Manual 17 ■ Recall Safe function In the Recall Safe function, you can specify that custom bank settings of all scenes will be globally excluded from recall operations. 1. In the Function Access Area, press the CH JOB button to access the CH JOB popup window. 2. Press...

User settings V1.7 Supplementary Manual 18 Added load/save functions CL series settings can now be loaded individually from a USB flash drive, or saved individually to a USB flash drive. Loading settings from a USB flash drive Follow the steps below to load CL settings from the USB flash drive into ...

User settings V1.7 Supplementary Manual 19 • SETUP tab The following table lists the items that you can select. NOTE If you load output port items individually, the settings of the channel assigned to the port will not be reflected. Recall them after loading a scene that includes input/output patchi...

User settings V1.7 Supplementary Manual 20 6 SELECT ALL button Press this button to select all items. 7 CLEAR ALL button Press this button to clear all selections. 5. Press the tabs and buttons of the TYPE field to select the type of data that you want to save. The content shown in the TYPE field wi...

User settings V1.7 Supplementary Manual 21 Added function for recovering from USB overcurrent Even if the connection with the USB device was stopped because an overcurrent condition occurred at the USB port, it is now possible to reconnect the USB device without restarting. Recovery procedure After ...

Other functions V1.7 Supplementary Manual 22 Other functions Improvements to the channel name display Improvements have been made to the channel name display and channel color indicator. The channel on/off status is now shown in SENDS ON FADER mode. If NAME DISPLAY is set to “NAME ONLY” in the PREFE...

Other functions V1.7 Supplementary Manual 23 Added GPI functions You can now select the attributes (latched or unlatched) of an external switch connected to a GPI IN port. ■ GPI settings 1. In the Function Access Area, press the SETUP button to access the SETUP screen. 2. Press the MIDI/GPI button t...

V1.7 Supplementary Manual 24 INSERT IN PATCH (OUTPUT CH) 2 POST ON INSERT OUT PREMIUM RACK IN PATCH EFFECT RACK IN PATCH 64 CASCADE IN SELECT SLOT1 1-16SLOT2 1-16SLOT3 1-16 ATT Keyin Self PRE EQ Self POST EQ MIX21-24 OUT CH[1-8,9-16,17-24,25-32,33-40,41-48, 49-56, 57-64, 65-72]POST EQ(CL5) CH[1-8,9-...