Yamaha ATS-930- Manuals

6 En Connections Power cable To AC wall outlet Sound bar (rear) Optical cable Optical cable Playback device (such as a BD player) Set top box OPTICAL OUTPUT OPTICAL OUTPUT TV HINT In the following cases, connect the optical output of the playback device to the BD/DVD input of the sound bar with an o...

7 En You can connect an external device, such as a game console or TV that does not have an optical output, to the ANALOG input jacks of the sound bar. NOTE • Make sure the left (L) and right (R) channels are connected correctly.• Select the ANALOG key on the remote control for the input source. You...

8 En Operations Preparing the remote control Peel off the protection sheet before use. Operating range of the remote control Remain within the operating range shown below. Indicators The indicators on the front panel flash or light up, to indicate the operation and setting status. Remote control sen...

10 En Settings Once you program the sound bar, you can control it with your TV’s remote control for functions such as turning on/off the TV and sound bar simultaneously, or volume up/down and muting/unmuting of the sound bar. 1 Turn off the TV. 2 Turn off the sound bar. 3 Hold down the LEARN key on ...

11 En 6 Teach the sound bar the “Volume (+)” code of the TV’s remote control. 6-1 Press VOLUME (+) on the front panel of the sound bar. 6-2 While pointing your TV’s remote control at the remote control sensor, hold down the volume (+) key for more than 1 second twice or three times. 7 Teach the soun...

12 En When the TV Remote Repeater function is enabled, the sound bar relays the TV’s remote signal received by the front sensor to the rear transmitter. This function should be enabled when you place the sound bar in front of your TV and you cannot operate your TV with the TV’s remote control. NOTE ...

13 En Troubleshooting Refer to the table below when the sound bar does not function properly. If the problem you are experiencing is not listed below or if the instructions below do not help, turn off the sound bar, disconnect the power cable, and contact the nearest authorized Yamaha dealer or serv...

14 En Remote control Problem Cause Remedy The sound bar cannot be controlled using the remote control. The sound bar is out of the operating range. Use the remote control within the operating range (p.8). The batteries are weak. Replace with new batteries (p.8). The remote control sensor of the soun...

15 En Specifications * Specifications are subject to change without notice. This system employs new technologies and algorithms that make it possible to achieve 7.1 channel surround sound with only front speakers, and without using wall reflections. “UniVolume” is a trademark of Yamaha Corporation. ...