Yamaha 01V96 - Manuals

Configuring Studio Manager 5 Studio Manager for 01V96—Owner’s Manual Configuring Studio Manager Selecting Ports In order to use Studio Manager, you must specify the input and output ports that Studio Manager should use to communicate with the 01V96. Windows: Choose System Setup from the File menu, a...

6 Chapter 1—Getting Started Studio Manager for 01V96—Owner’s Manual This is the Macintosh Setup window Input Port/Output Port: (Windows only) These pop-up menus are used to select the ports with which Studio Manager communicates with the 01V96. Console Device ID: Studio Manager can control any one o...

Working with Sessions 7 Studio Manager for 01V96—Owner’s Manual Working with Sessions A Studio Manager Session consists of all 01V96 mix settings, including Scene and library data. • To create a new Session, choose New Session from the File menu. • To open a previously saved Session, choose Open Ses...

8 Chapter 2—Console Window Studio Manager for 01V96—Owner’s Manual 2 Console Window Studio Manager’s Console window displays 20 channel strips and a master section. When an Input Channel Layer is selected, 16 Input Channels and four Stereo Input channels are displayed. When the Master Layer is selec...

Input Channels 9 Studio Manager for 01V96—Owner’s Manual Input Channels A SOURCE parameter This parameter is used to select an Input source. To select an Input source, click the parameter and choose from the list that appears. B Routing buttons These buttons are used to route the Input Channel to th...

10 Chapter 2—Console Window Studio Manager for 01V96—Owner’s Manual P Delay parameter This parameter is used to set the delay time of the Delay function. Delay times can be set by dragging. Q Channel number This is the channel number. R AUX section These controls are used to set the levels of the Au...

Stero Input Channel 11 Studio Manager for 01V96—Owner’s Manual Stero Input Channel A SOURCE parameter This parameter is used to select an Input source. To select an Input source, click the parameter and choose from the list that appears. B Routing buttons These buttons are used to route the Input Ch...

12 Chapter 2—Console Window Studio Manager for 01V96—Owner’s Manual O Short channel name This is the channel’s short name. To edit the name, click it and type. P Channel fader This is the Input Channel’s fader. Q Channel meter This meter displays the signal level of the channel L or R. Master Sectio...

Output Channels 13 Studio Manager for 01V96—Owner’s Manual Output Channels When the Master Layer is selected, the Bus Out and Aux Send channels are displayed. A Bus Out channel is shown here. Aux Send channels appear the same except that they do not have a STEREO button. A STEREO button (Bus Out onl...

14 Chapter 2—Console Window Studio Manager for 01V96—Owner’s Manual Remote Channels When the Remote Layer is selected, Remote Channels are displayed. A Channel number This is the channel number. B SELECT button This button is used to select the Remote Channel. C ON button This button turns the Remot...

Selected Channel Window 15 Studio Manager for 01V96—Owner’s Manual 3 Selected Channel Window The Selected Channel window allows detailed editing of the currently selected channel. To open the Selected Channel window, choose Selected Channel from the Windows menu. The layout of the Selected Channel w...

Stereo Input Channels 17 Studio Manager for 01V96—Owner’s Manual I PAIR, FADER GROUP & MUTE GROUP section This section contains the Pair, Fader and Mute group functions for the currently selected Input Channel. Click the heart icon to pair and unpair the channel with its partner channel. Use the...

18 Chapter 3—Selected Channel Window Studio Manager for 01V96—Owner’s Manual D Routing, pan & level section This section contains the routing, pan, and level controls and the, SOLO, and ON buttons for the currently selected Stereo Input Channel. ROUTING buttons 1–8 are used to route the channel ...

20 Chapter 3—Selected Channel Window Studio Manager for 01V96—Owner’s Manual Aux Sends This is the Selected Channel window for Aux Sends. A CHANNEL SELECT section Channels can be selected by clicking the Channel ID and choosing from the list that appears, or by clicking the left and right Channel Se...

Stereo Out 21 Studio Manager for 01V96—Owner’s Manual F INSERT section This section contains the Insert parameters for the currently selected Aux Send. The INSERT button turns the Insert on and off. The OUT and IN parameters are used to specify the insert out destination and insert in source respect...

Library Window 23 Studio Manager for 01V96—Owner’s Manual 4 Library Window The Library window allows you to control and manage 01V96 Scenes and libraries. In addi-tion, Scenes and libraries can be saved to disk on your computer. The Library window provides access to the following libraries: The layo...

Patch Editor Window 25 Studio Manager for 01V96—Owner’s Manual 5 Patch Editor Window The Patch Editor window is used to patch Inputs, Outputs, Inserts, Effects, and Direct Outs. It consists of five pages, which are selected by clicking the tabs along the top of the window. To open the Patch Editor w...

26 Chapter 5—Patch Editor Window Studio Manager for 01V96—Owner’s Manual OUTPUT PATCH Page A Channel IDs These are the Channel IDs. B Long channel names These are the Channel long names. To edit a name, click it and type. C AUTO SETUP button Clicking this button sets the patches on this page to thei...

INSERT PATCH Page 27 Studio Manager for 01V96—Owner’s Manual INSERT PATCH Page A Channel IDs These are the Channel IDs. B Long channel names These are the Channel long names. To edit a name, click it and type. C LIBRARY buttons These buttons open the Input and Output Patch Library windows. D Insert ...

28 Chapter 5—Patch Editor Window Studio Manager for 01V96—Owner’s Manual EFFECT PATCH Page A Effects processor #1—#4 inputs These parameters are used to select input sources for internal effects processors #1—#4. B LIBRARY button This button opens the Input Patch Library window. 2 1

DIRECT OUT Patch Page 29 Studio Manager for 01V96—Owner’s Manual DIRECT OUT Patch Page A Channel IDs These are the Channel IDs. B Long channel names These are the Channel long names. To edit a name, click it and type. C LIBRARY button This button opens the Output Patch Library window. D Patchbay The...

30 Chapter 6—Surround Editor Window Studio Manager for 01V96—Owner’s Manual 6 Surround Editor Window The Surround Editor window allows you to edit the surround pan position of the currently selected Input Channel. To open the Surround Editor window, choose Surround Editor from the Windows menu. A CH...

Effect Editor Window 31 Studio Manager for 01V96—Owner’s Manual 7 Effect Editor Window The Effect Editor window allows you to edit the internal effects processors. To open the Effect Editor window, choose Effect Editor from the Windows menu. A Effects processor select These buttons are used to selec...

32 Chapter 8—Keyboard Shortcuts Studio Manager for 01V96—Owner’s Manual 8 Keyboard Shortcuts File Menu Windows Menu Windows Macintosh Action CTRL+N - N Creates a new Session CTRL+O - O Opens a previously saved Session CTRL+S -S Saves the current Session Windows Macintosh Action CTRL+W - W Closes the...

33 Studio Manager for 01V96—Owner’s Manual Index Numerics 01V96 INTERNAL DATA pane 24 A ALL CLEAR button 25 , 26 All Lib, synchronization 6 AUTO SETUP button 25 , 26 AUX section 10 , 11 Aux Send masters selected channel window 20 AUX SEND section 16 , 18 B BAL control 22 Bus Outs console window 13 s...

6 b. If MIDI is used, set the MIDI PORT under the Tx column to USB Port 3 . Set MIDI REMOTE Output Port for BANK A to USB Port 2 , as shown below. 5. The SINGLE MODE MIDI CH > Tx should be set to 1 . This will be the Midi channel for snapshot recall. Please view Chapter 6 Step 3 for more informat...

7 3.2 - Setup the PM5D MIDI Remote Settings: Technical Note : The initial settings for the PM5D MIDI Remote are not suitable for controlling SG MultiRack and must be edited. Each control that is required should be converted into the format as shown below. To save programming time please follow these...

10 4.0 - Setup YAMAHA M7CL/LS9/CL Series (CL5/CL3/CL1) MIDI Connections Technical Note: When using Ethernet connection between Yamaha M7CL/LS9/CL Series and your SG MuliRack computer the Yamaha’s Network-MIDI Driver software is required. Please download and install the Network-MIDI Driver to your SG...

12 M7CL SCENE MEMORY section CL Series SCENE MEMORY section LS9 DATA ENTRY section On the LS9 Click on SCENE MEMORY under DISPLAY ACCESS . Now DATA ENTRY section would let you switch between the LS9 Scenes. Click on ENTER to switch

15 5.0 - Setup YAMAHA DM1000/2000 and O1V96/O2V96 MIDI / USB Connections Follow these instructions to setup the required MIDI/USB connections to control Waves SG MultiRack from your Yamaha DM1000/2000 or 01V96 / 02V96 console. 1. On the DISPLAY ACCESS section click on the MIDI button repeatedly to a...

16 5. Set the MIDI PORTS in this page. a. If MIDI is used, set the Tx MIDI PORT to MIDI , and set REMOTE under SPECIAL FUNCTIONS also to MIDI . b. If USB is used, USB Port 2 in the REMOTE under SPECIAL FUNCTIONS , and USB Port 3 in the GENERAL Tx PORT , as shown below. Please Note : When using Yamah...

17 Yamaha O1V96 SCENE MEMORY Control Yamaha DM1000 SCENE MEMORY Control This concludes the programming on your Yamaha DM1000/2000 console. Click Here for Chapter 6 to complete the SG MultiRack Setup

18 6.0 - Configure Your SG MultiRack System for MIDI Control: Please follow these instructions to configure your SG MultiRack system for MIDI Control via the Yamaha console you’re working on. 1. Launch SG MultiRack , open the Preferences window and go to the Control tab. a. Windows - Edit > Prefe...

19 2. In the Control tab, check the required MIDI In port: a. The MAC Address of the WSG-Y16 card is shown, and should be selected if a MIDI cable is used (Usually in cases where Yamaha M7CL or LS9 is used). Example of a MAC address of the WSG-Y16 b. If a USB connection is used, select USB Ports 2 a...

21 7.0 – Mapping the MultiRack Remote Controller Editor Window In this section we'll cover the MIDI Mapping of MultiRack's Remote Controller Editor Window. This is where incoming MIDI messages from the Yamaha console can be mapped to the SG MultiRack software functions. There are two ways of Mapping...

22 5. Click on Open Editor to open the MultiRack Remote Controller Editor Window. There you will see a fully configured MIDI messages mapped to the software functions. Fully Controlled MultiRack Remote Controller Editor Window 6. Click [OK] to close the SG MultiRack Preferences window. Please Note :...

23 7.2 – Manual Mapping of the MultiRack Remote Controller Editor Window: Once you have the Yamaha console MIDI Control fully configured, it is very simple to manually assign the Controls to where you want them on the console. 1. Launch the MultiRack Remote Controller Editor software. a. Mac – Appli...

25 Please Note : When setting the SNAPSHOT RECALL Section, bear in mind that when you are use the Yamaha console Scene Control, the MultiRack Snapshot will follow to the Scene Control exact number. Meaning if you switch to Scene 2 on the Yamaha console, the MultiRack Snapshot will go back to Snapsho...

26 8.0 Implementing the Yamaha Console MIDI mapping with the SG MultiRack: In your SG MultiRack’s session you will be able to see which plug-ins parameters are assigned to Plug-Ins Controls. Bear in mind that you can only use 8 Encoders and Switches for Plug-in Control at a time. You are able to see...

27 The Plug-in parameters which are assigned to MIDI Controllers will be highlighted Red as shown below. Furthermore, the Plug-ins Parameter Page number will be displayed on the Controller Strip . Example – Q10 EQ Controlled By Yamaha Console Viewing Two Plug-in Parameters Pages . The 8 Encoders and...

28 Appendix A. Remote control assignments of Yamaha PM5D, DM2000, DM1000 consoles. A.1 – Plug-in and Racks Parameters Control. This will cover which of the Plug-in and Racks parameters will be controlled via these Yamaha consoles when using the *.mrrc temple files. Continuous Plug-In Control 1 2 3 4...

29 A.2 - MIDI functions Assigned to User Defined Keys of these Yamaha consoles. This will cover the MIDI functions are assigned to the User Defined Keys of the Yamaha consoles when using the *.mrrc temple files. These are used for the following functions : 1. Recall specific Snapshots (the 8 Hot Sna...

30 B. Remote control assignments of Yamaha M7CL, LS9 and CL Series consoles. This will cover which of the following functions will be controlled by the User Defined Key assignments of these Yamaha console when using the *.mrrc temple files. Discrete Plug-in Controls 1 2 3 4 5 6 7 8 Control Change Nu...