Xantrex RS400 - Manuals

445-0167-01-01 v Important Safety Instructions General Precautions 1. Before installing and using the inverter, read all appropriate sections of this guide and any cautionary markings on the inverter and the batteries. 2. Do not operate the inverter if it has received a sharp blow, been dropped, or ...

Safety vi 445-0167-01-01 4. To reduce the risk of electrical shock, disconnect both AC and DC power from the inverter before working on any circuits connected to the inverter. Turning the On/Standby switch to Standby ( ) will not reduce this risk. 5. Protect the inverter from rain, snow, spray, and ...

445-0167-01-01 vii Important Safety Instructions General Precautions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - v Explosive Gas Precautions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - vi FCC Informatio...

Contents viii 445-0167-01-01 A Specifications Electrical Specifications - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - A–2 Physical Specifications with Projections - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - A–2 Regulatory Approvals - - ...

1 Introduction Congratulations on your purchase of the RS400 Sine Wave Inverter! The RS400 has been designed to give you premium power, ease of use, and outstanding reliability. Please read this chapter to familiarize yourself with the main performance and protection features of the RS400. To ensure...

1–2 445-0167-01-01 How RS400 Works RS400 is a sine wave inverter which converts 12 volts direct current (DC) power from your battery to 120 volts alternating current (AC) power. This AC power is the same as the electricity you get from your utility. In terms of output, RS400 provides 400 watts of si...

Comprehensive Protection 445-0167-01-01 1–3 Comprehensive Protection RS400 is designed to meet UL 458 and CSA C22.2 No. 107.1 safety standards and it is compliant with FCC Class B. RS400 comes equipped with numerous protection features to guarantee you safe and worry-free operation. Protection featu...

1–4 445-0167-01-01 RS400 Features Front Panel \ Figure 1-1 Front panel of the RS400 Table 1-1 Front Panel Features Feature Description 1 On/Standby Switch turns the inverter to On ( ) or to Standby ( ) . 2 AC Input light illuminates when you are connected to shore power. (Shore power refers to the A...

RS400 Features 445-0167-01-01 1–5 Back Panel Figure 1-2 Back panel of the RS400 Table 1-2 Back Panel Features Feature Description 1 DC terminal, negative 2 DC terminal, positive 3 Two AC outlets 4 AC input cord for shore power 5 Wiring box access panel 6 AC knockout (output) for hardwiring 7 Chassis...

1–6 445-0167-01-01 Optional Accessory: Remote Switch An optional remote switch can be plugged into the remote switch jack at the back of the RS400. It lets you switch the RS400 from on to standby from a convenient location—up to 25 feet (7.5 m) away from the inverter (using the cable supplied with t...

2 Operation Chapter 2, “Operation”, explains how to use your RS400 effectively. This chapter explains how to turn the RS400 to On ( )or Standby ( ) from the front panel or from the S400 Remote Switch, monitor the status of the RS400, and reset the inverter. 3 CAUTION Read this chapter before operati...

2–2 445-0167-01-01 Front Panel Features Before you begin to operate the RS400, review the front panel features in Figure 2-1. For a detailed description of each of the different features, see Figure 1-1, “Front panel of the RS400” on page 1–4 in the Introduction chapter. Figure 2-1 Front panel of th...

2–4 445-0167-01-01 Using the S400 Remote Switch The S400 Remote Switch performs the same function as the On/Standby switch on the RS400. Invert mode use only The S400 Remote Switch provides On/Standby control only when the RS400 is operating in invert mode. To use the S400 Remote Switch, the On/Stan...

Operating in Invert Mode 445-0167-01-01 2–5 Operating in Invert Mode In invert mode, the RS400 powers your appliances using energy from the battery. If the On/Standby switch on both the RS400 and the optional S400 Remote Switch are turned to On ( ), the RS400 automatically supplies your appliances w...

2–6 445-0167-01-01 Recovering from Low Battery Voltage Shutdown If the Low Battery light illuminates and the Inverter ON light turns off on the front panel when you are operating the unit, the RS400 has shut down due to low battery voltage (10.3 volts). Output power is interrupted. To recover from a...

Operating in Shore Power Mode 445-0167-01-01 2–7 Operating in Shore Power Mode Definition Shore power (pass-through) refers to the AC input power from a utility grid, generator, or external AC source. Shore power mode In shore power mode, the RS400 is connected to shore power and your appliances are...

2–8 445-0167-01-01 Monitoring the Indicator Lights The four indicator lights on the front panel show you the operating status of the RS400. See Table 2-2. For an illustration of the indicator lights on the front panel, see “Front panel of the RS400” on page 2–2. If none of the front panel lights are...

Resetting After a Fault or Shutdown 445-0167-01-01 2–9 Resetting After a Fault or Shutdown This section provides explanations and procedures for resetting the RS400 after a fault or shutdown. If you are unable to resolve the problem after referring to Table 2-3, refer to the “Troubleshooting” sectio...

3 Troubleshooting The RS400 is designed for high reliability and has a number of protection features for trouble-free operation. If, however, you have any problems operating your inverter, refer to the “Troubleshooting Reference” on page 3–2. Read this chapter before calling your dealer or Xantrex C...

3–2 445-0167-01-01 Troubleshooting Reference This section provides you with troubleshooting tips to identify and solve most problems that can occur with the RS400. Before contacting your dealer or customer service, please refer to the “Troubleshooting Reference” table. If the “Troubleshooting Refere...

A–2 445-0167-01-01 Electrical Specifications 1 The term “watts” has been used throughout the guide to refer to output power. More correctly, the actual unit of power used is “VA”. Physical Specifications with Projections Output power at 12 VDC input• Continuous • Surge capacity for 5 seconds 400 VA ...

Regulatory Approvals 445-0167-01-01 A–3 Regulatory Approvals Fan Cooling System A fan cools the internal heat generating components of the inverter. The fan begins to operate when the internal temperature is too high . The speed of the fan increases as the internal temperature rises. The fan turns o...

445-0167-01-01 WA–1 Warranty and Product Information Warranty What does this warranty cover? This Limited Warranty is provided by Xantrex Technology, Inc. ("Xantrex") and covers defects in workmanship and materials in your RS400 Sine Wave Inverter. This warranty lasts for a Warranty Period o...

WA–2 445-0167-01-01 What does this warranty not cover? This Limited Warranty does not cover normal wear and tear of the product or costs related to the removal, installation, or troubleshooting of the customer's electrical systems. This warranty does not apply to and Xantrex will not be responsible ...

Return Material Authorization Policy 445-0167-01-01 WA–3 Please note that the RS400 Sine Wave Inverter is not intended for use as an uninterruptible power supply and Xantrex makes no warranty or representation in connection with any use of the product for such purposes. Return Material Authorization...

WA–4 445-0167-01-01 Payment options such as credit card or money order will be explained by the Customer Service Representative. In cases where the minimum flat fee does not apply, as with incomplete units or units with excessive damage, an additional fee will be charged. If applicable, you will be ...

A AC Input light described 1–4 illustrated 1–4, 2–2 B back panel features described and illustrated 1–5 batteries explosive gases vi recharging 2–5 battery chargers 2–5 battery monitors 2–5 C Customer Service email WA–1 fax number WA–1 phone number WA–1 preparing to call WA–4 E email, contacting Cus...

Xantrex Technology Inc. 604 422 2777 Tel604 420 2145 Fax800 670 0707 Toll Free North [email protected] 445-0167-01-01 Printed in China