White Single-Stage Snow Thrower - Manuals

Operation 1. Do not put hands or feet near rotating parts, in the auger/impeller housing or chute assembly. Contact with the rotating parts can amputate hands and feet. 2. The auger/impeller control lever is a safety device. Never bypass its operation. Doing so makes the machine unsafe and may cause...

6 NOTE: This Operator’s Manual covers several models. Snow thrower features vary by model. Not all features discussed in this manual are applicable to all snow thrower models. NOTE: All references to left or right side of the snow thrower is from the operating position only Contents of Carton Carton...

8 Before Starting WARNING: Read, understand, and follow all instructions and warnings on the machine and in this manual before operating. IMPORTANT: For complete and detailed engine starting, stopping and storing instructions, it is recom-mended that you read the engine manual also included with thi...

9 Operating Tips 1. Discharge snow downwind whenever possible. Slightly overlap each previously cleared path. 2. Lifting up on the handle will allow the rubber on the augers to propel the snow thrower forward. Pushing downward on the handle will raise the augers off the ground and stop forward motio...

10 WARNING: Disconnect the spark plug wire and ground it against the engine to prevent unintended starting.WARNING: NEVER attempt to make any adjustments while the engine is running, except where specified in the operator’s manual. Shave Plate 1. To check the adjustment of the shave plate, place the...

11 Before servicing, repairing, or inspect- ing, disengage the control bail and stop engine. Wait until all moving parts have come to a complete stop. Disconnect spark plug wire and ground it against the engine to prevent unintended starting. WARNING 6 Adjustments & Maintenance Figure 6-3 IMPORT...

1 4. Remove the spark plug and pour one (1) ounce of engine oil through the spark plug hole into the cylinder. Cover spark plug hole with a rag and crank the engine several times to distribute the oil. Replace spark plug. NOTE: Refer to the engine manual for more information on preparing the snow th...

13 8 Trouble- Shooting Engine runs erratic Engine overheats Loss of power Excessive vibration Unit fails to self-propel Augers continue to rotate 1. Unit running on choke2. Fuel line blocked, or stale fuel 3. Water or dirt in fuel system4. Carburetor out of adjustment 1. Carburetor out of adjustment...

1 9 Part List: Snow Thrower For parts and/or accessories please call our Dealer Locator line at 1-800-949-4483 or log onto whiteoutdoor.com NOTE: For painted parts, please refer to the list of color codes below. Please add the applicable color code, wherever needed, to the part number to order a rep...

18 10 Accessories & Kits MODEL DESCRIPTION OEM-390-986 Electric Start Kit (fits models with a four-cycle Tecumseh 4 HP or 5 HP engine) OEM-737-0209 MTD 4-cycle Snow Thrower Oil Premium 4-cycle snow thrower oil, SAE 5W30, 20oz. easy pour bottle OEM-754-0101A Snow Thrower Auger Belt 753-0451 Shave...

The limited warranty set forth below is given by MTD LLC with respect to new merchandise purchased and used in the United States, its posses-sions and territories.“MTD” warrants this product against defects in material and workmanship for a period of two (2) years commencing on the date of original ...