White Rodgers 37-5086A - Manuals

White Rodgers 37-5086A – Manual in PDF format online.

Manuals:

Manual

Manual White Rodgers 37-5086A

Summary

Page 2 - SELECT THERMOSTAT LOCATION; Locate thermostat about 5 ft. above the floor.; ROUTE WIRES TO LOCATION; Probe for obstructions in partition before drilling; NOTE; Figure 1. Routing thermostat wires

2 SPECIFICATIONS ELECTRICAL DATAElectrical Rating: 17 to 30 VAC, 50/60 Hz.0.05 to 1.5 Amps1.5 Amps Maximum Total Load (All terminals combined) Anticipation: Heating 2 to 40Cooling 4 to 40 THERMAL DATASetpoint Temperature Range: 40 ° F to 99 ° F (4 ° C to 37 ° C) Operating Ambient Temperature Range: ...

Page 3 - REPLACEMENT INSTALLATION; REMOVE OLD THERMOSTAT; TABLE 1. OLD THERMOSTAT IDENTIFICATION; TABLE 2. WIRE IDENTIFICATION LABELS; Figure 2. Removing thermostat from subbase

3 REPLACEMENT INSTALLATION REMOVE OLD THERMOSTAT 1. Shut off electricity at the main fuse box until installa-tion is complete. Verify power is off with a voltmeter. 2. Remove the front cover of the old thermostat. Withwires still attached, remove wall plate from the wall. 3. If the old thermostat ha...

Page 4 - CAUTION

4 RH Y MV 24 VAC 120 VAC Hot Neutral THERMOSTAT SYSTEM G W Figure 7. Typical wiring diagram for heat/cool, 4-wire, single transformer systems TRANSFORMER 6 Cooling System Fan Relay Heating System RC JUMPER WIRE G RC 6 MV Y W RH Thermostat Terminal Connections G From 24 VAC transformer From fan relay...