White Rodgers 1F95W-71 - Manuals

6 PARTS OF THE THERMOSTAT The Back of The Thermostat Body Turn the thermostat body over. On the back arethe 9 volt Energizer ® alkaline battery and the option switches. 1. The 9 volt Energizer ® alkaline battery pro- vides power to the thermostat when the24 VAC power is interrupted (for example,when...

7 BACK OF THERMOSTAT BODY Option switches 9-pin connector 4-pin connector Battery The buttons (other than and ) are located behind the thermostat door. To open thedoor, pull the door out from the top, then swingthe door down on its hinges. Following are brief descriptions of the displayand the therm...

8 The Display 1 Continuously displays system mode (HEAT, OFF, COOL, AUTO, HOLD). During pro-gramming, the day of the week is displayed(MO, TU, WE, etc). 2 Alternately displays room temperature (F denotes degrees Fahrenheit and C denotesdegrees Celsius) and time of day (A de-notes AM time and P denot...

10 The Thermostat Buttons 7 Sets the system mode (HEATing, OFF, COOLing, or AUTOmatic changeover). 8 Selects fan operation (see #5, above). This button is also used to program the fan to runcontinuously during a program period. 9 Runs display forward or backward through time, day, or anticipation se...

11 5 DAY FAN AUTO VIEW PRGM RUN PRGM FAN ON - AUTO HOLD COPY VIEW TEMP SET CLOCK ADVDAY SYSTEM HEAT - OFF - COOL - AUTO TIME FWD TIME BACK 17 9 10 11 12 13 14 15 8 7 16 18 16 (Red arrow) Raises temperature setting (99 ° F or 37 ° C maximum). 17 (Blue arrow) Lowers temperature setting (40 ° F or 4 ° ...

12 OPERATING FEATURES Now that you are familiar with the thermostatdisplay and buttons, read the following informa-tion to learn about the many features of thethermostat. • COMPUTED ENERGY MANAGEMENT RECOVERY (EMR) — The thermostat’smicrocomputer automatically calculates thetime it will take to chan...

16 Switches #1 and #2 are set at installationand should not be changed. To enable totalkeypad lockout, move option switch #3 toON (ensure that option switch #4 is OFF).To disable total keypad lockout, move op-tion switch #3 to OFF. • PARTIAL KEYPAD LOCKOUT — When option switch #4 is in the partial k...

17 Programming should be completed and batteryshould be installed before changing optionswitch #4. Partial Keypad Lockout Switch #1 set at installation (DO NOT CHANGE)Switch #2 set at installation (DO NOT CHANGE)Switch #3 OFFSwitch #4 ON Switches #1 and #2 are set at installationand should not be ch...

18 Now you are ready to program your thermostat.This section will help you plan and program yourthermostat to meet your needs. For maximum comfort and efficiency, keep thefollowing guidelines in mind when planning yourprogram. • When heating (cooling) your building, pro- gram the temperatures to be ...

20 If you want to change the preprogrammed timesand temperatures, follow these steps. 1. Determine the heating and cooling tem-peratures you want to use. You may selectup to two heating temperatures (HEAT Aand HEAT B), and up to two cooling tem-peratures (COOL A and COOL B). Use thetable on the next...

22 Period 1 Period 2 Period 3 Period 4 Time Heat Temp. Cool Temp. Time Heat Temp. Cool Temp. Time Heat Temp. Cool Temp. Time Heat Temp. Cool Temp. Monday Tuesday Wednesday Thursday Friday Saturday Sunday Heating/Cooling Schedule Plan THIS THERMOSTAT ALLOWS ONE SET OF TIMES FOR BOTH HEATING AND COOLI...

24 ENTERING YOUR PROGRAM Follow these steps to enter the heating/coolingprogram you have selected. We recommend that you remove the thermostatfrom the wall for programming (especially forentering cooling programming). A fresh 9 voltEnergizer ® alkaline battery must be installed to perform off-wall p...

30 6. Press ADVDAY to choose other days to pro- gram. Remember, once you enter Monday’sprogram, Monday’s program is automati-cally copied into Tuesday’s through Sunday’sprograms. 7. After you enter or copy heating and cooling programs for all 7 days, press RUN PRGM to begin program operation. Using ...

31 CHECK YOUR PROGRAMMING Follow these steps to check your thermostatprogramming one final time before beginningthermostat operation. 1. Press SYSTEM HEAT - OFF - COOL - AUTO until HEAT is displayed. 2. Press and hold VIEW PRGM to view the heating/ cooling period times and heating tempera-tures for ...

33 which means the temperature will not changefrom COOL A when period 2 begins. SeePROGRAMMING YOUR THERMOSTAT. 3. How can I finish my programming if thedisplay has already changed to time/temperature?During programming, if no buttons arepressed for five minutes, the thermostat willenter the HOLD mo...

36 8. Why doesn’t the display light come onwhen I press a button? Why don’t I heara beep when I press a button?The display light and audio prompting (beep)only work when the thermostat is on the walland 24 VAC power is present to the thermo-stat. These features will not work on batterypower alone. S...

37 CAUTION ! If the outside temperature is below 50 ° F, DO NOT use the button to move the temperature below the setpoint tempera-ture. Property damage may result due tocompressor slugging. 11. Why doesn’t the temperature change at the time I programmed?There may be a number of causes for thissituat...

38 12. Why does the blower fan keep running after the system has turned off?• You have programmed the fan to runcontinuously during this period. SeePROGRAMMING YOUR THERMO-STAT. • The blower delay feature is operating.This energy saving feature continues toblow conditioned air through the ductsafter...

39 15. I live in an area where daylight savings time is observed. How do I change mythermostat clock twice a year withoutaffecting programming?To change your clock, follow the instruc-tions for setting current time and day. SeeENTERING YOUR PROGRAM. Thermo-stat programming is not affected when youch...