White Rodgers 1F94-80 - Manuals

White Rodgers 1F94-80 – Manual in PDF format online.

Manuals:

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8

Summary

Page 2 - Reference Values; SPECIFICATIONS; Operating Ambient Temperature Range:; NEW INSTALLATION; SELECT THERMOSTAT LOCATION; Locate thermostat about 5 ft. above the floor.; ROUTE WIRES TO LOCATION; Figure 1. Routing thermostat wires

2 ELECTRICAL DATAElectrical Rating: 20 to 30v AC 50/60 Hz.0.01 to 1.5 Amps (Load per terminal)2.5 Amps Maximum Total Load (All terminals combined) Anticipation: Heating 4 to 40Cooling 4 to 40 Reference Values Auxiliary 4 to 40 STAGING DATAUp to two heating stagesUp to two cooling stages SPECIFICATIO...

Page 3 - REPLACEMENT INSTALLATION; REMOVE OLD THERMOSTAT; TABLE 1. WIRE IDENTIFICATION LABELS; NOTE; TABLE 1. TERMINAL REFERENCE

3 REPLACEMENT INSTALLATION REMOVE OLD THERMOSTAT 1. Shut off electricity at the main fuse box until installa-tion is complete. Verify power is off with a voltmeter. 2. Remove the front cover of the old thermostat. Withwires still attached, remove wall plate from the wall. 3. If the old thermostat ha...

Page 4 - Move subbase out of the way. Drill mounting holes.; CAUTION; power is off with a voltmeter.; Figure 4. Typical wiring diagram for single transformer systems

4 2. Connect wires beneath terminal screws on sub-base using appropriate wiring schematic (see figs.3 through 6). 3. Place subbase over hole in wall and mark mountinghole locations on wall using subbase as a template. 4. Move subbase out of the way. Drill mounting holes. 5. Fasten subbase loosely to...

White Rodgers Manuals