Page 2 - Installation; IMPORTANT SAFETY INSTRUCTIONS; Conditions of use; CONTENTS; Electrical connection
2 3 CONTENTS SAFETY INSTRUCTIONS SAFETY CONTENTS TIPS & INFORMATION IMPORTANT Check for any damage or marks If you find the cooktop is damaged or marked, you must report it within 7 days if you wish to claim for damage/ marks under the manufacturer’s warranty. This does not affect your statutory...
Page 3 - Use; Care And Cleaning; WARNING; INSTALLATION INSTRUCTIONS; To attach the seal; WARNING
4 5 SAFETY INSTRUCTIONS INSTALLATION IMPORTANT SAFETY INSTRUCTIONS Use WARNING WARNING Risk of injury, burns or electric shock. • Use this appliance in a household environment. • Do not change the specification of this appliance. • Do not use an external timer or a separate remote- control system to...
Page 4 - Technical data; PRODUCT DESCRIPTION; IMPORTANT
6 7 INSTALLATION DESCRIPTION WHI323BC = = R 5mm 600mm 270 +1 mm 490 +1 mm min. 20mm INSTALLATION INSTRUCTIONS (CONTINUED) Technical data WHI323BC PNC 949 163 424 Product dimensions (w x d) mm 300 x 520 Cut-out dimensions (w x d) mm 270 x 490 Voltage (volts) 220-240 Cycles (Hz) 50-60 Total power 3700...
8 9 DESCRIPTION OPERATING INSTRUCTIONS Heat setting displays DISPLAY DESCRIPTION The cooking zone is deactivated. - The cooking zone operates. The Keep Warm function operates. The Automatic Heat-up function operates. The cookware is incorrect or too small, or there is no cookware on the cooking zone...
Page 6 - HELPFUL HINTS AND TIPS
10 11 OPERATING INSTRUCTIONS HELPFUL HINTS AND TIPS Power management The power management divides the power between two cooking zones in a pair (see the figure). The power function increases the power to the maximum level for one cooking zone in the pair and automatically decreases in the second coo...
Page 7 - Care and cleaning; CARE AND CLEANING; TROUBLESHOOTING
12 13 CARE AND CLEANING TROUBLESHOOTING Care and cleaning Clean the appliance after each use. Always use cookware with clean bottom. TIPS & INFORMATION IMPORTANT Sharp objects and abrasive cleaning agents will damage the appliance. For your safety, do not clean the appliance with steam blasters ...
Page 8 - Warranty; Important Notice; AUSTRALIA; NEW ZEALAND
14 15 WARRANTY TROUBLESHOOTING PROBLEM POSSIBLE CAUSE AND REMEDY REMEDY The heat setting changes between two levels. • The Power management is activated. • See the section Power management. The sensor fields become hot. • The cookware is too large or you out it too near to the controls. • Put large ...