Westinghouse WHG646SB - Manuals

Page 2 - Conditions of Use; IMPORTANT INFORMATION THAT MAY; CONTENTS; WARNING; WARNING; CAUTION; ENVIRONMENTAL TIPS; ENVIRONMENT

2 CONTENTS Dear customer, Congratulations and thank you for choosing our cooktop. We are sure you will find your new cooktop a pleasure to use and a great asset to your cooking. Before you use the cooktop, we recommend that you read through the whole user manual which provides the description of the...

Page 3 - IMPORTANT; IMPORTANT SAFETY INSTRUCTIONS

3 IMPORTANT SAFETY INSTRUCTIONS Please read the user manual carefully and store in a handy place for later reference. TIPS & INFORMATION IMPORTANT Important – check for any damages or marks. If you find the cooktop is damaged or marked, you must report it within 7 days if you wish to claim for d...

Page 4 - INSTALLATION; Installation; Controls; Lighting burners; USING YOUR COOKTOP

4 INSTALLATION INSTALLATION WARNING CAUTION You must read these warnings carefully before installing or using the cooktop. If you need assistance, contact our Customer Care Department. The manufacturer will not accept liability, should the instructions below or any other safety instructions incorpor...

Page 5 - CARE AND CLEANING

5 CLEANING AND CARE Choice of burners For your convenience there is a choice of burners: • A small burner for special low heat and slow cooking. • A medium burner for normal cooking and simmering. (one on 4-burner models and two on 5-burner models). • A large burner for fast heating and large pots a...

Page 6 - TROUBLESHOOTING

6 TROUBLESHOOTING TROUBLESHOOTING FAULT POSSIBLE CAUSES REMEDY Burner will not light even though the sparker is working. • Knob not held down long enough in ‘High’ position for flame safeguard to engage • Repeat lighting procedure and hold knob down for 5 seconds in ‘High’ position (refer page 4) • ...

Page 7 - TECHNICAL DATA

7 TECHNICAL DATA FEATURES WHG644SA WHG646SB Cooking zones 4 4 Wok Yes Yes Ignition 220-240V 220-240V Trivet Wire Cast Hob material Stainless steel Stainless steel Features Ignition through knob Ignition through knob Flame safeguard Yes Yes Colours Stainless steel Stainless steel Gas Types NG, (LP co...

Page 9 - INSTALLATION INSTRUCTIONS

9 NOTE: Distances shown to adjacent walls/surfaces are for the distance to a combustible surface. If the surface is not combustible the measurement can be smaller than that shown. Figure 4 - Installation cut-outs C B D min A min INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS MODEL CODE DIMENSIO...

Page 10 - INSTALLATION PROCEDURE

10 INSTALLATION PROCEDURE 1. The bench cutout should be made as per cutout dimensions in Figure 4. 2. Adjacent walls, cupboards and protection for combustible materials. Ensure that the appliance is installed in accordance with AS/NZS 5601.1, or AS/NZS 5601.2 with regard to clearances to combustible...

Page 12 - GAS CONNECTION; Supply pipe sizing

12 GAS CONNECTION OPERATION ON N.G./S.N.G. GAS CONNECTION WARNING CAUTION This appliance is supplied for use with Natural Gas. However, it can be converted for use with LPG. Refer to LP conversion on pages 12 and 13. Supply pipe sizing The total hourly gas consumption for the appliance is shown on t...

Page 14 - LPG CONVERSION

14 LPG CONVERSION This appliance is supplied set up for Natural Gas usage. A conversion kit is included with the product for Universal LPG usage. The conversion kit contains the appropriate injectors and 1 LPG sticker. Please follow the procedure below if a conversion to suit UNIVERSAL LPG is requir...

Page 15 - Use of Hose Assemblies

15 ELECTRICAL CONNECTION ELECTRICAL CONNECTION (220-240 VOLTS) The appliance is supplied with a standard 7.5Amp service cord terminated by a 3-pin plug for connection to a standard household socket. The electrical supply is required to power the electronic ignition system. NOTE: It will be necessary...

Page 16 - TESTING APPLIANCE OPERATION

16 TESTING APPLIANCE OPERATION After installation, test the appliance and ensure that it operates correctly before handing it over to the customer. The following procedure is recommended: 1. Turn on the gas and electricity supply and attempt ignition on all burners, both separately and in combinatio...

Page 19 - Warranty; Important Notice

19 WARRANTY This document sets out the terms and conditions of the product warranties for Westinghouse Appliances. It is an important document. Please keep it with your proof of purchase documents in a safe place for future reference should there be a manufacturing defect in your Appliance. This war...

Page 20 - TOP SERVICE

AUSTRALIA phone: 1300 363 640fax: 1800 350 067 email: [email protected]web: westinghouse.com.au NEW ZEALAND phone: 0800 436 245fax: 0800 225 088 email: [email protected]web: westinghouse.co.nz For more information on all Westinghouse appliances, or for dimension and installation information, call in...