Wells H-65 - Manuals - manualsarea.com

Page 2 - xi

221 p/n 3 0 3 7 3 3 Op M a n ual CT Ho tpla te Unless otherwise specified, all commercial cooking equipment manufactured by WELLS BLOOMFIELD, LLC is warranted against defects in materials and workmanship for a period of one year from the date of original installation or 18 months from the date of sh...

Page 4 - FEATURES & OPERATING CONTROLS

Heating Element Provides heat for food preparation Coil-type elements rotate for access to drip pan Note: Solid (french plate) elements on model H-70 do not lift Element Support * Holds coil-type element in proper position Drip Pan* Collects drippings and holds element support Also deflects heat fro...

Page 6 - INSTALLATION; DO NOT discard; UNPACKING & INSPECTION; Carefully read all instructions in this manual and the; SETUP; Supplied legs must be properly installed.; ELECTRICAL

INSTALLATION NOTE: DO NOT discard the carton or other packing materials until you have inspected the appliance for hidden damage and tested it for proper operation. Refer to SHIPPING DAMAGE CLAIM PROCEDURE on the inside front cover of this manual. CAUTION: ELECTRIC SHOCK HAZARD The ground prong of t...

Page 7 - GENERAL OPERATIONAL NOTES; OPERATION; TemperaturevControl Knob

OPERATION GENERAL OPERATIONAL NOTES Carefully read the description of the hotplate operation on the specification sheet. DO NOT attempt to perform any maintenance or service unless the hotplate is unplugged or disconnected from electrical power. DO unplug the hotplate from electrical power or turn t...

Page 8 - CLEANING INSTRUCTIONS; PREPARATION; BURN HAZARD; DO NOT spill

CLEANING INSTRUCTIONS PREPARATION Unplug or disconnect hotplate from electrical power before cleaning. Allow hotplate to cool completely before cleaning. FREQUENCY Daily TOOLS Plastic Spatula and Plastic Scouring Pad Clean Cloth or Sponge Mild Detergent or Cleaner Formulated for Stainless Steel Warm...

Page 9 - TROUBLESHOOTING; SUGGESTED REMEDY; There are no user

TROUBLESHOOTING SYMPTOM Hotplate won’t heat One or more sections won’t heat Hotplate not hot enough POSSIBLE CAUSE Not plugged in, damaged plug or cord or circuit breaker tripped Temperature control not on Damaged temperature control, element or other internal component Temperature control not set O...

Page 10 - NOTES

NOTES 8 221 p/n 3 0 3 7 3 3 Op M a n ual CT Ho tpla te

Page 11 - CUSTOMER SERVICE DATA; Wells Bloomfield, LLC

DESCRIPTION SERVICE PART NO. 4” LEGS, Plastic, Set of 4 20314 4” LEGS, Nickel Plated Alloy, Set of 4 20563 Drip Tray, 8” for H-63, H-65 21705 Element Support, H-63, H-65 500039 PARTS & SERVICE CUSTOMER SERVICE DATA please have this information available if calling for service RESTAURANT ________...

Page 12 - Genuine Parts; Wells Bloomfield proudly supports CFESA; WELLS BLOOMFIELD, LLC

Genuine Parts Protect - YOU - All - Ways SERVICE TRAINING - QUALITY SERVICE SERVICE TRAINING - QUALITY SERVICE CUSTOMER SATISFACTION CUSTOMER SATISFACTION Commercial Food Equipment Service Association Wells Bloomfield proudly supports CFESA Commercial Food Equipment Service Association PRINTED IN UN...