Wells 2274EX - Manuals

Wells 2274EX – Manual in PDF format online.

Manuals:

Manual

Manual Wells 2274EX

Summary

Page 2 - xi

All electrical equipment manufactured by BLOOMFIELD INDUSTRIES is warranted against defects in materials and workmanship for a period of one year from the date of original installation or eighteen (18) months from the date of shipment from our factory, whichever comes first, and is for the benefit o...

Page 3 - ELECTRICAL SPECIFICATIONS*; TABLE OF CONTENTS

ELECTRICAL SPECIFICATIONS* MODEL WATTS VOLTS 1ø Hz CIRCUIT REQUIRED WIRE 2212 1800 120 50/60 15 AMP ( NEMA 5-15R ) 2 + ground 2216 3500 120/240 50/60 HARD WIRE TO CIRCUIT BREAKER 3 + ground 2272 1800 120 50/60 15 AMP ( NEMA 5-15R ) 2 + ground 2216EX 3500 240 50/60 HARD WIRE TO CIRCUIT BREAKER 2 + gr...

Page 4 - FEATURES & OPERATING CONTROLS

FEATURES & OPERATING CONTROLS 1. Brew Indicator Glows during brew cycle, flashes in “Brew Wait” 2. Heat Indicator Glows when heating elements are energized 3. Power Indicator Glows when power is on 4. Warmer Indicators Glow when individual warmers are turned on 5. Brew Key Press to initiate brew...

Page 5 - PRECAUTIONS AND GENERAL INFORMATION; Electric Shock Hazard

PRECAUTIONS AND GENERAL INFORMATION WARNING: Electric Shock Hazard All servicing requiring access to non-insulated components must be performed by qualified service personnel. Do not open any access panels which require the use of tools. Failure to heed this warning can result in electrical shock. W...

Page 6 - INSTALLATION INSTRUCTIONS; READ THIS CAREFULLY BEFORE STARTING THE INSTALLATION; PLUMBER’S INSTALLATION INSTRUCTIONS; Brewer should be connected to a; WATER; line. Flush water line before connecting to Brewer.; Equipment; Water supply inlet line

INSTALLATION INSTRUCTIONS READ THIS CAREFULLY BEFORE STARTING THE INSTALLATION REFER TO EXPLODED VIEWS PAGES 16 thru 19 FOR COMPONENT NAMES/NUMBERS 1. Unpack the unit. Inspect all components for completeness and condition. Ensure that all packing materials have been removed from the unit. 2. (See pa...

Page 8 - OPERATING INSTRUCTIONS

OPERATION To over-ride the Brew Wait mode , press and hold the BREW key for 3 seconds when the brewer is in Brew Wait mode (i.e. when brew light is flashing). The brew will proceed immediately regardless of water temperature. This feature should only be used when testing water volume, otherwise the ...

Page 9 - brew chamber; from under the spray head.; decanter; under the brew chamber.; USER’S GUIDE

OPERATION (continued) WARNING: Burn Hazard. This appliance dispenses very hot liquid. Serious bodily injury from scalding can occur from contact with dispensed liquids. CAUTION: Burn Hazard To avoid splashing or overflowing hot liquids, ALWAYS use an empty decanter before starting the brew cycle. Fa...

Page 10 - CLEANING INSTRUCTIONS; PROCEDURE: Clean Coffee Brewer; Remove and empty brew chamber.

CLEANING INSTRUCTIONS CAUTION: Burn Hazard Brewing and serving temperatures of coffee are extremely hot. Hot coffee will cause serious skin burns. CAUTION: Electric Shock Hazard Do not submerge or immerse brewer in water. Do not pour or splash water into or over air vents, control panel or warmer pl...

Page 11 - SERVICING — OPERATIONAL ADJUSTMENTS

A. Adjust Brew Time B. Adjust Brew Temperature C. Adjust Quality Timer D. Adjust Dripout Timer E. Adjust After Hours Timer A B C D E UNDER TOP COVER (IN SECONDS) BREWTIMER (IN °F) BREWTEMP (IN 5 MIN INCR) QUALITY TIMER (IN SECONDS) DRIPOUT TIMER (IN ONE HR INCR) AFTER HOURS TIMER WATERLEVELPROBE TEM...

Page 12 - ON; FILL

SERVICING INSTRUCTIONS — ELECTRICAL OPERATION SEE PAGE 11 FOR COMPONENT NAMES / NUMBERS 1. Pressing the POWER key energizes the unit. The POWER LED will glow whenever the unit is ON . 2. Automatic fill is accomplished via a FILL SOLENOID (32) and a WATER LEVEL PROBE (7). The probe senses ground thro...

Page 13 - ELECTRICAL COMPONENT; UNITS; SERVICING INSTRUCTIONS — ELECTRICAL

27 28 WARMER MOUNTING 3 5 4 20 32 18 7 8 15 17 4 E-MAX LX ELECTRICAL COMPONENT 120VUNITS 120/240V UNITS SERVICING INSTRUCTIONS — ELECTRICAL 3 PROBE, TEMPERATURE (THERMISTOR) 4 THERMOSTAT, HI-LIMIT 5 GROMMET 7 PROBE, WATER LEVEL 8 SLEEVE, WATER LEVEL PROBE 15 ELEMENT, WATER HEATING 17 ASSEMBLY, TRIAC...

Page 14 - OPERATION; The solenoid has an internal strainer. To clean the; SERVICING INSTRUCTIONS — PLUMBING

OPERATION SEE PAGE 13 FOR COMPONENT NAMES/NUMBERS 1. Water enters at the inlet fitting of the fill solenoid (32). The solenoid admits water via a command from the controller. NOTE: The solenoid has an internal strainer. To clean the strainer: Shut off water supply. Unscrew the plastic cap protruding...

Page 15 - ITEM

SERVICING INSTRUCTIONS — PLUMBING 13 ITEM DESCRIPTION PART N0. USED ON 1 2 ASSEMBLY, WATER TANK (120V) 83500 2212, 2272 6 GASKET, TANK LID 83499 ALL 9 TANK LID 83504 ALL 10 RETAINING CLIP, TANK LID 83506 ALL 11 HOSE, OVERFLOW (2 pc SILICONE 4.5” LONG) 86014 ALL 12 HOSE, FAUCET SUPPLY (SILICONE, 10” ...

Page 16 - SERVICING INSTRUCTIONS — DE-LIMING HEATER TANK; Disconnect brewer form the electrical supply. Turn off

SERVICING INSTRUCTIONS — DE-LIMING HEATER TANK 1. Disconnect brewer form the electrical supply. Turn off the water supply and disconnect water supply from the brewer inlet fitting. 2. Remove the top panel or top warmer section to gain access to internal components. 3. Disconnect water level sensor a...

Page 18 - EXPLODED VIEW — IN-LINE MODELS

Page 19 - PARTS LIST — IN-LINE MODELS

Page 20 - EXPLODED VIEW — STEP-UP MODELS

Page 21 - PARTS LIST — STEP-UP MODELS

Page 22 - WIRING DIAGRAM — IN-LINE MODELS

Page 23 - WIRING DIAGRAM — IN-LINE EXPORT MODEL

Page 24 - WIRING DIAGRAM — STEP-UP MODEL

CONTROL BOARD 1 WP3 2 WP2 3 WP1 1 Heater (Line) 2 Inlet (Line) 3 Dump Line 4 Power (Line) 5 6 Dump (Neut) 7 Power (Neut) 8 Heater (Neut) Lin e Loa d Ga te Front Warmer Plate #2 120V 100 Watt Main Warmer Plate 120V 100 Watt Rear Warmer Plate #3 120V 100 Watt OutletValve InletValve 120 Volt 1500 Watt ...

Page 25 - WIRING DIAGRAM — STEP-UP EXPORT MODEL

Page 26 - Bloomfield Industries proudly supports CFESA

Bloomfield Industries, Inc. Division of Carrier Refrigeration In US In Canada PO Box 280, Verdi, NV 89439 Telephone: 775-345-0444 Service: 888-492-2782 Fax: 888-792-2783 website: www.wellsbloomfield.com Telephone: 877-507-1700 Service: 905-507-1700 Fax: 905-507-1777 website: www.bloomcan.com Bloomfi...