Weber S-460 - Manuals

6 WWW.WEBER.COM ® OPERATING Liquid Propane (LP) gas supply is easy to use and gives you more cooking control than charcoal fuel.• These instructions will give you the minimum requirements for assembling your Weber ® gas barbecue. Please read the instructions carefully before using your Weber ® gas b...

7 WWW.WEBER.COM ® 7 GENERAL INSTRUCTIONS IMPORTANT LP CYLINDER INFORMATION Failure to follow these DANGER statements exactly may result in a fire causing death or serious injury. DANGER NEVER store a spare LP Cylinder under or near this barbecue. NEVER fill the tank beyond 80% full. The proper filli...

8 WWW.WEBER.COM ® GAS INSTRUCTIONS Some LP tanks have differing top collar assembles. (The top collar is the metal protective ring around the valve.) One series of tanks mount with the valve facing front (a) . The other tanks mount with the valve facing away from the fuel scale (b) . Weber recommend...

10 WWW.WEBER.COM ® 2 7 1 5 6 A A * The grill illustrated may have slight differences than the model purchased. CHECK: 1) Main gas line to manifold connection. 2) Rotisserie (I.R. Burner) gas line connection. 3) Bulkhead and gas supply hose connection. 4) Corregated gas line to bulkhead connection. W...

11 WWW.WEBER.COM ® 11 GAS INSTRUCTIONS REFILLING THE LIQUID PROPANE CYLINDER We recommend that you refill the LP cylinder before it is completely empty.Removal of the LP cylinder1) Close cylinder valve (turn clockwise). 2) Unscrew regulator coupling by turning counterclockwise, by hand only. 3) Loos...

12 WWW.WEBER.COM ® GAS INSTRUCTIONS SNAP IGNITION OPERATION Always open the lid before igniting the burners Each control knob has its own igniter electrode built in. To create a spark you must push the control knob in (A) and turn to “START/High” (B) . This action will generate gas flow and a spark ...

13 WWW.WEBER.COM ® 13 2 4 5 3 1 LIGHTING Summary lighting instructions are inside the left hand cabinet door. DANGER Failure to open the lid while igniting the barbecue’s burners, or not waiting 5 minutes to allow the gas to clear if the barbecue does not light, may result in an explosive flame-up w...

16 WWW.WEBER.COM ® USING THE SEAR STATION ™ Your Weber ® gas barbecue includes a sear burner for searing meats such as steak, poultry parts, fish, and chops). Searing is a direct grilling technique which browns the surface of the food at a high temperature. By searing or browning both sides of the m...

17 WWW.WEBER.COM ® 17 1) Open the lid. 2) Make sure all burner control knobs are turned off. (Push control knob in and turn clockwise to ensure that it is in the “OFF” position.) WARNING: The burner control knobs must be in the “OFF” position before turning on the liquid propane cylinder tank valve....

22 WWW.WEBER.COM ® LIGHTING THE ROTISSERIE BURNER ROTISSERIE BURNER SNAP IGNITION Note: Each control knob snap igniter creates a spark from the igniter electrode to the burner lighting tube. You generate the energy for the spark by pushing in the control knob and turning to “START/HI”. This will ign...

23 WWW.WEBER.COM ® 23 OPERATING INSTRUCTIONS DANGER When the "excess gas flow control" feature is activated, a small amount of gas is still flowing to the burners. After turning off the cylinder and burner control knobs, wait at least 5 minutes for the gas to clear before attempting to light...

25 WWW.WEBER.COM ® 25 OPERATING THE HANDLE LIGHT The Weber Grill Out™ Handle Light has a built-in “Tilt Sensor.” With the power button (a) activated, the light will come on when the grill lid is open. The light will turn off when the lid is closed. For daytime use, deactivate the sensor by pressing ...

26 WWW.WEBER.COM ® PROBLEM CHECK CURE Rotisserie burner does not light. Did you hold the burner control knob in and hold in for 20 seconds until after burner ignited? Try to relight burner by holding burner control knob in and continue holding in until 20 seconds after burner has ignited. Did you wa...

27 WWW.WEBER.COM ® 27 MAINTENANCE MAIN BURNER CLEANING PROCEDURE Turn off the gas supply. Remove the manifold (See “Replacing Main Burners”).Look inside each burner with a flashlight.Clean the inside of the burners with a wire (a straightened-out coat hanger will work). Check and clean the air shutt...

28 WWW.WEBER.COM ® MAINTENANCE Be careful not to break or disconnect the wires for the control panel lights.Rest the control panel against the left side of the grill (A) exposing the valves, burners, igniter, and manifold. 8) Remove the two screws that secure the manifold to the cookbox. Pull manifo...

29 WWW.WEBER.COM ® 29 ANNUAL MAINTENANCE INSPECTION AND CLEANING OF THE SPIDER/INSECT SCREENS To inspect the Spider/Insect screens, remove the control panel. If there is dust or dirt on the screens, remove the burners for cleaning the screens. Brush the Spider/Insect screens lightly with a soft bris...