Weber 2 - Manuals

Weber 2 – Manual in PDF format online.

Manuals:

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8

Summary

Page 2 - Apply pipe sealant to only the area indicated. Figure 5.; WARNING: Use a pipe sealant compound on the; MODELS WITH A BLACK SQUARE PIPE PLUG:; SIDE BURNER GAS CONNECTIONS; MODELS WITH A BRASS CAP:; Figure 4; OR

2 Step 5 FOR MODELS THAT USE THE ENCLOSEDBRASS FITTING Apply pipe sealant to only the area indicated. Figure 5. 몇 WARNING: Use a pipe sealant compound on the threads that is approved for natural or LP gas. Screw the fitting into the manifold using the 5/8 inch wrench.Figure 6(a). Only use pipesealan...

Page 3 - Figure 8; CHECK FOR GAS LEAKS; DANGER; Figure 9

3 Figure 8 Step 7 CHECK FOR GAS LEAKS Remove the control knob and two screws holding the sideburner cover to the bottom. Figure 8. Figure 7(a) Step 6 Slide the side burner assembly into the open end of theright frame. Route the side burner hose so that it parallelsthe front of the barbecue. Loop the...

Page 4 - Lighting the Side Burner; ) Check that the fuel scale reads more than E.; Secure side burner; CAUTION: Make sure both locks have snapped into

4 몇 DANGER Failure to open lid while igniting the sideburner, or not waiting 5 minutes to allow gasto clear if the side burner does not light,may result in an explosive flame-up whichcan cause serious bodily injury or death. Lighting the Side Burner The side burner has a separate ignition system fro...

Weber Manuals