Wayne Dalton 9300 - Manuals

Wayne Dalton 9300 – Manual in PDF format online.

Manuals:

Manual

Manual Wayne Dalton 9300

Summary

Page 2 - Definition of key words used in this manual:; PROPERTY DAMAGE OR INJURY CAN RESULT; Table of Contents; WARNING; READ AND FOLLOW ALL INSTALLATION INSTRUCTIONS.

2 Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com Deﬁnition of key words used in this manual: INDICATES...

Page 3 - Package Contents; NOTE; ALLA

3 Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com Package Contents NOTE : DEPENDING ON THE DOOR MODEL, ...

Page 4 - Door Section Identification; Please Do Not Return This Product To The Store.

All hinges are factory attached at the top of each section (except the top section). See illustrations to the right. NOTE : The side view illustration shows the roller carrier proﬁle at the top of each section, and can be used in conjunction with identifying each section. The BOTTOM SECTION can be i...

Page 5 - Tools Required

5 Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com IMPORTANT: COUNTERBALANCE SPRING TENSION MUST ALWAYS ...

Page 6 - Preparing the Opening; Recommended; FAILURE TO SECURELY ATTACH A SUITABLE; IMPORTANT; QUICK INSTALL

Tools Needed: 6 Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com Preparing the Opening Recommended tools...

Page 7 - Installation; Attaching Quick Install Flag

7 Tools Needed: Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com Begin the installation of the door by c...

Page 8 - local yellow pages/business listings or go to the; Find a Dealer; section online at; Horizontal Angle

Tools Needed: 8 Tools Needed: Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com Horizontal Angle Hammer A...

Page 9 - INST; JAMB BRACKET SCHEDULE

Tools Needed: 9 Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com INST ALLA TION Tape Measure 4 Installin...

Page 10 - : RIGHT AND LEFT HAND

Tools Needed: 10 Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com Drums IMPORTANT : RIGHT AND LEFT HAND ...

Page 11 - Bottom Section

11 Tools Needed: Tools Needed: Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com Bottom Section Center th...

Page 12 - Stacking Sections; Top Bracket Slide

Tools Needed: 12 Tools Needed: Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com Stacking Sections NOTE :...

Page 13 - Top Section; THE DIMENSION

Tools Needed: 13 Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com Top Section Place the top section in t...

Page 14 - : FAILURE TO REMOVE NAIL; : FAILURE TO REMOVE NAIL BEFORE

NOTE : If you have fully adjustable ﬂagangle, skip this step and complete Step 12. To install horizontal track, place the curved end over the top roller. Align key slot of the horizontal track with the quick install tab of the ﬂagangle. Push curved portion of horizontal track down to lock in place. ...

Page 15 - Adjusting Top Bracket Slide

15 Tools Needed: Tools Needed: Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com 14 Adjusting Top Bracket...

Page 16 - Center Bracket Assembly; Cable Drums

Tools Needed: None 15 Center Bracket Assembly NOTE : If you are installing the idrive ® opener with your garage door, skip this step and go to your idrive ® Installation Instructions and Owner’s Manual. After completing steps 1-13 of your idrive Installation Instructions and Owner’s Manual, rear sup...

Page 17 - : WARNING TAGS MUST BE; End Brackets; For double spring applications

Ratchet Paw l ENGAGED SIDE VIEW No space betw een Ratchet Pawl and Cable Drum ENGAGED UND ERN EAT H V IEW DISENGAGED SIDE VIEW DISENGAGED UNDE RNE AT Use these Il lustrat ion, in conjunction wit h the Instructi o this label . WARNIN G Rachet B racket is unde EXTREME SPRING TENSION . To avoid possibl...

Page 18 - SPRING; EXTREME SPRING

Tools Needed: Tools Needed: (2) Vice Clamps CENTER BRACKET BUSHING ASSEMBLY (2) 5/16” X 1-5/8” HEX HEAD LAG SCREWS Securing Center Bracket Assembly 19 NOTE : If you are not installing the idrive ® opener on your garage door, you must install the center bracket bushing assembly, follow these instruct...

Page 19 - Cable Adjustment; ENSURE THE CABLE IS; Winding Springs; PLUS SPRINGS. FAILURE; RECOMMENDED SPRING; Door Height

Cable Adjustment Vice Grips Pliers/Wire Cutters Flat Tip Screwdriver Step Ladder ENGAGED No space between Ratchet Pawl and Cable Drum ENGAGED UNDERNEATH V IEW DISENGAG DISENGAGED UNDERNEATH VIEW Use these Illustration, in conjunction this label. WA Rachet Bra EXTREM TEN To avoid poss fatal injury, D...

Page 20 - HOLD THE DOOR DOWN TO; Drum Wrap Installation

Tools Needed: 22 Winding Springs Continued... extension is also recommended for added clearance from the horizontal angle.), wind the spring by rotating the winding shaft counter clockwise, while watching either the black tooth on the ratchet wheel or the mark on the winding shaft. IMPORTANT : PAWL ...

Page 21 - Rear Support; DO NOT SUPPORT THE; Add Spring Tension; Ratchet Wrench

Tools Needed: 21 Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com Rear Support Raise the door until the ...

Page 22 - Remove Spring Tension; : BE PREPARED TO HOLD; : DO NOT ADD OR REMOVE

Tools Needed: 22 Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com onto the winding shaft, pull down to a...

Page 23 - THE OPENER FORCE SET-; Single spring system:; TorqueMaster

Tools Needed: 23 Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com IMPORTANT! THE OPENER FORCE SET- TINGS...

Page 24 - BE PREPARED TO SUPPORT

Tools Needed: 24 Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com Cable Drum No space between Ratchet Pa...

Page 25 - To Remove Spring Tension:; Side Lock; : SIDE LOCKS MUST BE

Tools Needed: EN GAGED SIDE VIEW hese Illustrati on , in co njuncti on with th e Instruct ions on t he other side of WA RNING Rach et B rac ke t is under XTR EM E S PRI NG NSIO N . sev ere o r ov e To add spring tension, ensure the ratchet wrench is set so that it will tighten counter clockwise on t...

Page 26 - HEIGHT; : ANGLE MUST BE ATTACHED TO; DO NOT PAINT DOOR. PAINTING DOOR WILL VOID YOUR WARRANTY.

Tools Needed: Power Drill 1/8” Drill Bit Tape Measure Pull Rope DO NOT INSTALL PULL ROPES ON DOORS WITH ELECTRIC OPERATORS. CHILDREN MAY BECOME ENTANGLED IN THE ROPE CAUSING SEVERE OR FATAL INJURY. Measure and mark the jamb approximately 48” to 50” (1220 to 1270 mm) from floor on the right or left s...

Page 27 - Limited Warranty

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com 27 Limited Warranty Model 9300 Subject to the terms and...

Page 28 - Please Do Not Return This Product To The Store

28 Please Do Not Return This Product To The Store Covered by one or more of the following Patents 5,259,143; 5,408,724; 5,409,051; 5,419,010; 5,495,640; 5,522,446; 5,562,141; 5,566,740; 5,568,672; 5,718,533; 5,720,142; 5,836,499; 5,914,078; 6,019,269; 6,089,304; 6,442,897 Other US and Foreign Patent...