Wayne Dalton 44 - Manuals - manualsarea.com

Page 2 - Parts BreakDown

2 Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your local yellow pages business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com A. TRACk ROLLERS (AS REquIRED): A1. Short Stem Track ...

Page 3 - Important Safety Instructions; WARNING; Tools Required

Important Safety Instructions DEFINITION OF kEy WORDS uSED IN THIS MANuAL: WARNING WARNING INDICATES A POTENTIALLy HAzARDOuS SITuATION WHICH; IF NOT AvOIDED, COuLD RESuLT IN SEvERE OR FATAL INJuRy. CAuTION: PROPERTY DAMAGE OR INJuRY CAN RESuLT FROM FAILuRE TO FOLLOW INSTRuCTIONS. IMPORTANT: REquIRED...

Page 6 - Removing an Existing Door; A POWERFuL SPRING RELEASING ITS ENERGy SuDDENLy CAN CAuSE SEvERE; Preparing the Opening

7 Section High Strutting Schedule Intermediate IV (1) Long (1) Long Top Of Section N/A N/A Bottom Of section Intermediate III (1) Long (1) Long Top Of Section N/A N/A Bottom Of section Intermediate II (1) Long (1) Long Top Of Section N/A N/A Bottom Of section Intermediate I N/A (1) Long Top Of Secti...

Page 8 - InstallatIon; Fully Adjustable Flag Angles; Fully Adjustable Jamb Brackets; FAILuRE TO ENSuRE TIGHT FIT OF CABLE LOOP OvER COTTER PIN COuLD

InstallatIon Before installing your door, be certain that you have read and followed all of the instruc- tions covered in the pre-installation section of this manual. Failure to do so may result in an improperly installed door. IMPORTANT: WOOD DOORS MuST BE COMPLETELY FINISHED (3 TOTAL COATS, INCLuD...

Page 9 - Track Roller Carriers; Strutting

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your local yellow pages business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com Track Roller Carriers Tools: Power Drill, 9/32” Drill B...

Page 10 - Half Center Hinges; Top Fixtures

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your local yellow pages business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com Half Center Hinges Tools: Power drill, 7/16” Socket dri...

Page 11 - Stacking Sections; Top Section

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your local yellow pages business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com IF yOu HAvE 3” vERTICAL TRACkS: Tighten lag screws, sec...

Page 12 - Horizontal Tracks; DO NOT RAISE DOOR uNTIL HORIzONTAL TRACkS ARE SECuRED AT REAR,; Adjusting Top Fixtures

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your local yellow pages business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com Top section Top section Nail Flag angle or wallangle as...

Page 13 - Torsion Spring Assembly

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your local yellow pages business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com above the door, at the center. Split the difference up ...

Page 17 - Label Placement

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your local yellow pages business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com Horizontal tracks Door edges 3/4” To 7/8” 3/4” To 7/8” ...

Page 18 - Door Arm Hookup; Lift Handles; Pull Down Rope; DO NOT INSTALL PuLL DOWN ROPE ON DOORS WITH OPERATORS. CHILDREN; optional Installation

Door Arm Hookup Tools: Needle nose pliers At the center of the top section, measure horizontally from the top of center hinge to the bottom of strut. using that dimension, measure and cut (2) pieces of perforated angles. Assemble the (2) pieces together using (2) 3/8” bolts and nuts (supplied by oth...

Page 19 - Maintenance

Cleaning Your Garage Door IMPORTANT: DO NOT uSE A PRESSuRE WASHER ON YOuR GARAGE DOOR! An annual inspection of all the surfaces of your garage door(s) will reveal the extent of weather- ing and the possible need for refinishing. When the finish becomes eroded or thin, clean and prime any areas showi...

Page 21 - uNDERSCORED BOLD FACE; warranty

Limited warranty Double Flush, Model 44 Subject to the terms and conditions contained in this Limited Warranty, Wayne-Dalton (“Manufacturer”) warrants the sections of the door, against defects in material and workmanship, for a period of ONE (1) yEAR from the time of delivery provided: i) (i) The in...

Page 22 - Please Do Not Return This Product To The Store; thank you for your purchase.; Find a Dealer; section online at

aFter InstallatIon Is coMPlete, Fasten thIs Manual near the garage Door. Please Do Not Return This Product To The Store thank you for your purchase. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your local yellow pages business listings or go to the Find a ...