VTech VT6221 - Manuals

5 20401551en_ba_a0 Connecting the telephone Before you can start using your telephone you must plug in the telephone connectioncords and the mains cable. Safety note the base station! ➀ Telephone connection cord The telephone connection cord has two differentplugs. Insert the smaller plug in the soc...

6 20401551en_ba_a0 Removing the cords connection socket. Setting up the telephone First unplug the mains plug fr om the 220V socket and the plug from the telephone

8 20401551en_ba_a0 Charging the batteries The batteries are not yet charged when you first unpack the telephone. To charge the batteries, place the handset on the base station. The flashing battery symbol on the handset signals the charging pr ocedure. The batteries will take around 14 hours tocharg...

9 20401551en_ba_a0 Note You can replace the handset in the base station after every call. Charging is electronically controlled to ensure optimal charging of batteries in diffe- rent charge states. A void removing the batteries fr om the handset for no good reason, since this af fects the optimum ch...

10 20401551en_ba_a0 Displays, keys, symbols Displays The display gives you information on the current status of your telephone.The «standby indicator» shown below shows you your handset is ready for use. The symbols in the upper row of the display have the following meaning: The symbol is permanentl...

20401551en_ba_a0 Handset keys Open call list*, press key several times to scroll down. Previous called number(s), press to scroll through this redial list. Performs different functions depending on the context. ➮ Deletes the last character or number of an entry in the display. ➮ Press this key to re...

20401551en_ba_a0 Base station keys Paging key Charging cradle forthe handset Setting up the telephone PAGE 13

20401551en_ba_a0 Key lock on/off . During incoming calls the key lock is deactivated for the duration of the call. Key lock on Hold down the hash key for about 2 seconds. The display shows the key symbol . Key lock off Hold down the hash key for about 2 seconds. Note You cannot make outgoing calls w...

20401551en_ba_a0 Exter nal calls Pr ess the Talk key. Enter the required telephone number. This number will then be dialled. To end this external call: Pr ess the Talk-key,or replace the hendset Note You may also make external calls by using predialling: enter the telephonenumber, use the key to mak...

20401551en_ba_a0 Accepting a call Calls are signalled acoustically as well as optically in the handset display. ➭ The caller’s number is not displayed if the caller has withheld his number i.e. if he hassuppressed transmission of his number, or if this is not technically possible. Accepting a call P...

20401551en_ba_a0 Telephoning Redial The last 10 dialled numbers are saved under the redial key. Open the redial list. The last dialled number is displayed. Press this redial keyagain to scroll through the list. Pr ess the -key to exit the redial list . Press the -key for approx. 2 seconds to delete ...

20401551en_ba_a0 Dialling from the call list If your network operator supports caller ID (CLIP), numbers (up to 18 digits) of unanswe- red calls ar e saved in the caller list. The list can hold up to 10 entries. If the list is full, the oldest entry is deleted and the newest is put first in the list...

20401551en_ba_a0 Telephoning Muting the handset If you do not want your call partner to hear what you are saying to another person inthe room, you can temporarily mute your handset. You are conducting a call. Press the -key. The display shows M The call is put << Mute >> , and the call p...

Setting the ring tone melody You have a choice of six different melodies. Press the programming key. Press 5. The current setting is displayed (e.g. “2/6 ” is the second of 6 settings). Use numerical keys 1 to 6 to set the preferred melody. Press the programming key to save the setting. 20401551en_b...

20401551en_ba_a0 Speed dialling Your VT6221 can stor e 10 speed-dial numbers, each up to 18 digits. Selecting speed dialling Press the speed-dial key.The first entry is displayed. Scroll through the speed-dial list by pressing thespeed-dial key as often as required or use numerical keys 1 to 9 to se...

22 20401551en_ba_a0 Direct call (baby call) With direct call, you can program a number which can be directly dialled when any key(except the programming key) is pressed. Entering/editing the direct call number Press the programming key. Press 3. Enter your four-digit PIN. Press the programming key. ...

23 20401551en_ba_a0 Telephone settings Flash time Restoring default settings This procedure resets all the personal preferences you have programmed and restores thetelephone to default mode. Press the programming key. Press 9. Enter your PIN. Press the programming key to save the setting. Z PROGRAM ...

20401551en_ba_a0 24 Telephone settings Changing the PIN The PIN is a four-digit password to protect the base station and handsets against unau-thorised access. The telephone is delivered with the system PIN set to «0000». Press the programming key. Press 1. Enter the old four-digit PIN (default sett...

25 20401551en_ba_a0 Appendix Standard: DECT Number of channels: 120 duplex channels Frequencies: 1880 MHz bis 1900 MHz Range:up to 300 meters outdoors,up to 50 meters indoors Base station power supply:220 V /50 Hz (power pack) Base station 220V AC adapter Handsets operating time:standby / talk time ...