VTech VT 9152 - Manuals

5 REPLACING THE HANDSET BATTERIES GETTING ST A R TED 1. Slide the battery cover off by gentlypressing on the recessed area witha downward motion. 2. Unplug and remove the old batterypack. Don't put the old battery packin a trash compactor or a fire - itcould burst. 3. Plug in the replacement battery...

7 WALL MOUNTING wooden stud wallboard GETTING ST A R TED 1. Choose a spot near an electrical outlet and a telephone jack.Your phone requires amodular telephone jack and a standard electrical outlet (120V AC). The power cord is sixfeet long; make sure there is an electrical outlet within reach of the...

10 USING YOUR VT 9152 CORDLESS TELEPHONE B ASIC OPERA TION MAKING CALLS Pick up the Handset and press PHONE/FLASH. When you hear a dial tone, dial the number. The IN USE/LOW BATT LED will illuminate when the Handset is in use. If you make a mistake when dialing, press OFF to hang up, then press PHON...

11 USING YOUR VT 9152 CORDLESS TELEPHONE B ASIC OPERA TION MEMORY DIALING Your VT 9152 stores up to 10 phone numbers that you can access by pressing PROG/MEM and one of the number keys, 0 – 9. PROGRAMMING SPEED DIAL NUMBERS • Press PROG/MEM • Press a Memory Location (0 – 9) • Dial the phone number. ...

12 ANSWERING SYSTEM OPERATION B ASIC OPERA TION INTRODUCTION Your VT 9152 has a digital Answering Device in the Base Unit, capable of storing approxi- mately 12 minutes of messages. USE THE VT 9152 HANDSET TO PROGRAM YOUR ANSWERING SYSTEM!!! • You can listen to your messages from the Handset or the ...

13 HANDSET LAYOUT FOR ANSWERING SYSTEM OPERATION B ASIC OPERA TION KEY 2 KEY 4 KEY 7 KEY 1 KEY 0 KEY 3 KEY 6 KEY 9 KEY # KEY 5 KEY 8 With the Handset in the idle mode (on hook), first press ANS. MACHINE to enter Answering System mode, then one of the following keys: KEY FUNCTION 1 Repeat current mes...

14 ANSWERING SYSTEM SETUP A D V ANCED OPERA TION Before using your VT 9152 Answering System, follow these programming steps: 1 SET OUTGOING MESSAGE Record your greeting to be heard by callers. If you do not record a greeting, your VT 9152 will play a default greeting. • Press ANS. MACHINE on the Han...

15 ANSWERING SYSTEM SETUP A D V ANCED OPERA TION Now, follow the steps in 1 SET OUTGOING MESSAGE to record your “Announce Only” greeting. The VT 9152 Answering System will retain both outgoing greetings; one for Normal (record messages) mode, and one for Announce Only mode. NOTE!!!!! THE ANSWERING S...

16 ANSWERING SYSTEM SETUP A D V A NCED OPERA TION PLAYBACK OF GREETINGS, MESSAGES AND MEMOS From the Base Unit Use the PLAY/STOP to start and stop playback of messages and memos.• Press the >> SKIP key to jump ahead to the next message. • Hold the >> SKIP key to speed up message playback...

17 REMOTE OPERATION OF YOUR VT 9152 ANSWERING SYSTEM A D V ANCED OPERA TION You can access messages and change your greeting remotely, using a touch tone phone from a different line or location. Dial the phone number associated with the line to your VT 9152. While the greeting is playing, press #, f...

18 HEADSET OPERATION A D V ANCED OPERA TION Your VT 9152 cordless telephone is equipped with a 2.5mm Headset Jack for use with an accessory Headset for hands-free operation.Locate the Headset Jack on the VT 9152 handset. Connect line plug on the Headset cord to the jack on the cordless Handset. The ...

19 IN CASE OF DIFFICULTY ADDITIONAL INFORMA TION If you have difficulty operating your phone, the suggestions below should solve the problem.If you still have difficulty after trying these suggestions, In the US call:VTECH COMMUNICATIONS at 1-800-595-9511. In Canada call:VTECH ELECTRONICS at 1-800-2...

20 IN CASE OF DIFFICULTY ADDITIONAL INFORMA TION YOUR CALLER FADES IN AND OUT. • You may be nearly out of range. Move closer, or relocate the base. YOU HEAR OTHER CALLS WHILE USING YOUR PHONE. • Press CHAN key to switch to another channel. • Disconnect your base unit from the telephone jack, and plu...

21 LIMITED WARRANTY STATEMENT ADDITIONAL INFORMA TION What does this limited warranty cover? • The manufacturer of this VTECH product, VTECH Communications, warrants to theholder of a valid proof of purchase ("Consumer" or "you") that the product and allaccessories provided by VTECH ...

22 LIMITED WARRANTY STATEMENT ADDITIONAL INFORMA TION How do you get warranty service? • To obtain warranty ser vice in the United States of America, call 1-800-595-9511 forinstructions regarding where to return the Product. Before calling for service, pleasecheck the user's manual. A check of the P...

23 FCC AND IC REGULATIONS ADDITIONAL INFORMA TION This equipment complies with FCC AND IC REGULATIONS 15 and 68 of the FederalCommunications Commission (FCC) rules for the United States. It also complies with regulationsRSS-210 and CS-03 of Industry Canada (IC).A label is located on the underside of...

24 FCC AND IC REGULATIONS ADDITIONAL INFORMA TION R R R R R R Before installing this equipment, users should ensure that it is permissible to be connected tothe facilities of the local telecommunications company. The equipment must also be installedusing an acceptable method of connections. The cust...

25 MAINTENANCE ADDITIONAL INFORMA TION TAKING CARE OF YOUR TELEPHONE. Your VT 9152 cordless telephone contains sophisticated electronic parts so it must be treated with care. Avoid rough treatment Place the handset down gently. Save the original packing materials to protect your telephoneif you ever...

26 TECHNICAL SPECIFICATIONS FREQUENCY CONTROL Crystal Controlled Dual PLL Synthesizer TRANSMIT FREQUENCY Handset: 923.10 MHz to 927.75 MHz Base: 902.3 MHz to 906.65 MHz RECEIVE FREQUENCY Handset: 902.3 MHz to 906.65 MHz Base: 923.10 MHz to 927.75 MHz NOMINAL EFFECTIVE RANGE Maximum power allowed by ...

28 VTECH TELECOMMUNICATIONS LTD. A member of THE VTECH GROUP OF COMPANIES. Distributed in the U.S.A. by VTech Communications Inc, Beaverton, Oregon, 97008 Distributed in the Canada by VTech Electronics Canada Ltd., Suite 200-7671 AlderbridgeWay Richmond, B.C. V6X 1Z9. Copyright 2001 for VTECH TELECO...