VTech VT 2910C - Manuals - manualsarea.com

Page 2 - INTRODUCTION

2 • Extension In Use indication • Intercom/Page/Handset Locator • N o n - v o l a t i l e m e m o r y o f s t o r e dphone numbers and CID records • Long-life NiCad Battery provides upto 6 hours of talk time or 5 days ofstandby • Digital Volume Control • Face-up Handset charging • Easy Answer - When...

Page 3 - Parts Check List; BELT CLIP

3 Parts Check List 1. Base Unit, Handset and AC Adaptor2. Longer Two-Line Telephone Cords3. Shorter Telephone Cord(for mounting)4. Battery Pack5. Mounting screws for wall mounting6. Wall mount bracket To purchase additional Battery Packs,call VTECH Communications at 1-800-595-9511.In Canada,call VTE...

Page 4 - IMPORTANT SAFETY INSTRUCTIONS

4 Important Safety InstructionsWhen using your telephone, pleasefollow these basic safety precautionsto reduce the risk of fire, electric shockor injury to persons:I. R e a d a n d u n d e r s t a n d a l l instructions. II. Follow all warnings and instructions marked on the product. III. Unplug thi...

Page 5 - SAVE THESE INSTRUCTIONS

5 the risk of fire or electric shock. XII. Unplug this product from the wall outlet : A.When the power supply cord or plug is damaged or frayed. B.If liquid has been spilled into the product. C.If the product has been exposed to rain or water. D.If the product does not operate normally by following ...

Page 6 - RECHARGEABLE BATTERY PACKS; Charging the Handset batteries

6 RECHARGEABLE BATTERY PACKS Charging the Handset batteries The Handset of your VTech 2910c cord- less telephone is powered by a re-chargeable battery pack. It chargesautomatically whenever the Handset isin the Base Unit cradle. You shouldcharge the battery pack for 16 hourswhen you first receive yo...

Page 9 - WALL MOUNTING

9 The Wall Mount adaptor is designedto fit on standard Wall Mount plates. 1. Choose a spot near an electrical outlet and a telephone jack. Yourphone requires a modular telephonejack and a standard electrical outlet(120v AC). The power cord is sixfeet long; make sure there is an elec-trical outlet wi...

Page 10 - ANTENNA; HANDSET FEATURES

10 HANDSET FEATURES ANTENNA DISPLAY BELT CLIP NOTCH VOLUME UP KEYVOLUME DOWN KEY LINE (FLASH) KEYS OFF KEY DIALING KEYS ( 0-9)7.DATE KEY9.VIEW KEY * AND TEMPORARY TONE AND REVERSE SCROLL KEY# AND FORWARD SCROLL KEYCALLER ID KEYHOLD AND PAUSE KEYREDIAL KEYINTERCOM AND DELETE KEYCONFERENCE AND CLEAR K...

Page 13 - The; VT 2910c is also equipped with a

13 The VT 2910c is also equipped with a detachable belt clip. Align the pins onthe inside edge of the belt clip with thenotches on the inside of the VT 2910c Handset. The belt clip should snapsecurely into place. Do not force thec o n n e c t i o n . S e e i l l u s t r a t i o n W h i l e y o u a r...

Page 14 - EXAMPLES OF THE LCD DISPLAY

The handset has accessed LINE 1 The handset has accessed LINE 2 The Base Unit has accessed LINE 1 The handset has accessed LINE 1,while the Base Unit has accessedLINE 2 Both handset and Base have accessedLINE 1 Current Handset volume level Handset battery requires recharging Handset has entered INTE...

Page 15 - CID record if you subscribe to; only Caller ID; You have deleted a single CID record; all CID records

15 Handset is asking for 2-digit locationduring Memory Dial programming A mistake was made during MemoryDial programming Enter a 2-digit location for Memory(Speed) Dialing The contents of a Memory Dial locationhave been deleted The Handset has lost communicationwith the Base Unit, and is attempting ...

Page 16 - EXAMPLES OF THE LCD DICPLAY; Incoming Caller ID data was incomplete

16 EXAMPLES OF THE LCD DICPLAY The contents of Memory Dial location#13 You have deleted Memory Dial location#15 To prevent accidental deletions of allCID records or Memory Dial locations,this message prompts you to confirmyour decision Confirms mass deletion of all CIDrecords or Memory (Speed) Dial ...

Page 17 - BASE UNIT FEATURES

17 BASE UNIT FEATURES TONE PULSE 9V DC TEL.LINE L1 L2 OFF ON L2 RINGER OFF ON L1 RINGER TONE/PULSE SELECTOR BASE RINGER ON/OFF SWITCHES PHONE CORD JACKS AC POWER JACK CORDLESS MEMORY DIALING CARD SPARE BATT CHARGING COMPARTMENT HOLD KEY INTERCOM KEY INTERCOM INDICATOR LINE KEYS LINE INDICATORS POWER...

Page 18 - BASE LED INDICATORS

18 BASE LED INDICATORS POWER LEDG l o w s w h e n t h e AC a d a p t o r i ssupplying power to the Base Unit. CHARGE LEDGlows when the Handset is placed inthe Base Unit cradle to charge. SPARE CHARGE LEDGlows when the (optional) battery packis installed in spare battery compartmentin the Base Unit. ...

Page 19 - RINGER

19 RINGER ON/OFF SWITCHES Located on the right edge of the BaseUnit (antenna side), these switchescontrol the Base Unit ringer for each line.These switches have no effect on theHandset ringers. TONE/PULSE SWITCHLocated on the underside of the BaseUnit, set this switch to the dialing modecompatible w...

Page 20 - Setting up your VTech VT 2910c; GETTING STARTED

20 Setting up your VTech VT 2910c 1. Choose an area near an electrical outlet and telephone wall jack(s). 2. Plug the AC power adaptor into the e l e c t r i c a l o u t l e t a n d t h e D Cconnector to the back of the BaseUnit. CAUTION: Use only the AC adaptorshipped with your VT 2910c. This is aC...

Page 21 - BASIC OPERATIONS

21 MAKING CALLSExtend the Antenna whenever youremove the Handset from the BaseUnit cradle There are two ways to make a call:• Press LINE 1/FLASH or LINE 2/ FLASH and listen for dial tone. TheLCD will display HANDSET ON 1 (or 2). Dial the phone number. OR• With the Handset OFF, dial the phone number....

Page 24 - • Press INTERCOM. The Base Unit and; Handset are now in INTERCOM mode.; OR; • Let the ringing continue. It will stop; BASIC OPERATION

24 Base Unit Paging HandsetWhen the INT.COM key is pressed onthe Base Unit, the Handset will ringdifferently than its incoming call ring.The LCD will display BASE PAGINGHANDSET, as well. The Handset usercan then do the following: • Press INTERCOM. The Base Unit and Handset are now in INTERCOM mode. ...

Page 25 - ADVANCED OPERATIONS

25 For example: If the Handset is in CON-FERENCE mode, and someone at theBase Unit wants to join the conversa-tion, press either LINE key on the BaseUnit. The Base Unit has now enteredCONFERENCE mode. When both the Handset and the Base Unitare in CONFERENCE mode, pressingOFF on either unit does not ...

Page 26 - Once you have selected a ringer; Your; Storing a Pause in a Phone Number

26 Programming the Base Unit Ringer1. Press and hold the MEM/PROG key until the LCD displaysPROGRAM LOCATION _ _. 2. Press #. LCD displays ?: 1=HANDSET 2=BASE. 3. Press 2. LCD displays ?: 1=LINE 1 2=LINE 2. 4. Press 1 (or 2, depending on which line you’re programming). 5. Press 1,2,3, or 4. The Base...

Page 27 - displays; Alternate Memory Dialing Method

27 DELETING STORED NUMBERSYo u c a n d e l e t e i n d i v i d u a l p h o n enumbers stored in memory, or all storednumbers at one time. To Delete a single phone numberstored in Memory:With the Handset OFF, press the MEM/PROG key, and then access the desiredmemory location by entering the 2-digitlo...

Page 28 - VT 2910c cordless telephone is; alphanumeric; If you subscribe to; Examples of Caller ID Displays; ABC Company is calling on LINE 1.

28 Your VT 2910c cordless telephone is capable of displaying the name andphone number of the calling par ty,before you answer the call. In addition,it will display Caller ID information whenyou are on the phone and receive a CallWa i t i n g s i g n a l . S u b s c r i p t i o n t oCALLER ID and CAL...

Page 29 - DIALING FROM CID MEMORY; to the desired CID record.; DELETING SINGLE CALL.; key until the LCD displays; DELETE

29 3. Press INT.COM/DEL to confirm de- letion of all CID records. The LCDwill display DELETING ALL CALLS. P r e s s i n g a n y k e y o t h e r t h a nINT.COM/DEL cancel this operation. DIALING FROM CID MEMORY NOTE: Only the last 7 digits of thephone number will be dialed from CIDmemory. You can man...

Page 30 - The LCD will display; PROGRAM

30 S T O R I N G C I D R E C O R D S I NMEMORY DIALING LOCATIONS You can store a phone number from aC I D r e c o r d i n a M e m o r y D i a l i n g location. 1, With the Handset OFF, press the CID key. 2. Use the * ( ) or # ( ) keys to scroll to the CID record you wish to storein memory. 3. Press ...

Page 31 - MAINTENANCE

31 MAINTENANCE TAKING CARE OFYOUR TELEPHONE.Yo u r V Te c h V T 2 9 1 0 c c o r d l e s s t e l e p h o n e c o n t a i n s s o p h i s t i c a t e delectronic parts so it must be treatedwith care. Avoid rough treatmentPlace the Handset down gently. Savethe original packing materials to protectyour ...

Page 32 - IN CASE OF DIFFICULTY

32 YO U G E T N O I S E , S TAT I C , O R AWEAK SIGNAL EVEN WHEN YOU’RENEAR THE BASE UNIT.• Place the Handset in the Base mo- mentarily to re-set the security code.Then press PHONE to get a line. Household appliances plugged into thesame circuit as the Base Unit cansometimes cause interference. Tr y...

Page 34 - WARRANTY STATEMENT; Any defect in material or workmanship.; VTECH COMMUNICATIONS; In Canada; VTECH ELECTRONICS

34 WARRANTY STATEMENT WHAT DOES OUR WARRANTY COVER?• Any defect in material or workmanship. FOR HOW LONG AFTER THE ORIGINAL PURCHASE?• To the original purchaser only - ONE YEAR. WHAT WILL VTECH DO?• At our option, repair or replace your unit. HOW DO I SEND MY UNIT, IN OR OUT OF WARRANTY?• In the U.S...

Page 36 - FCC AND IC REGULATIONS

36 This equipment complies with Parts 15and 68 of the Federal CommunicationsCommission (FCC) rules for the UnitedStates. It also complies with IndustryCanada (IC) rules RSS210 and CS-03 forCanada. A label is located on the underside of theBase Unit containing either the FCC reg-istration number and ...

Page 38 - Notice:The Industry Canada label; Caution: Users should not attempt to

38 IC (Industry Canada)This telephone is registered for use inCanada.Notice: The REN/IES assigned to this t e l e p h o n e d e t e r m i n e s t h enumber of devices you mayconnect to the telephone loopwhich is used by the deviceto prevent over loading. Thet e r m i n a t i o n o n a l o o p m a yc...

Page 39 - VTECH; reserves the right to make; SPECIFICATIONS

39 WEIGHTHandset : 292 g (Battery included)Base : 800 g POWER REQUIREMENTSHandset : Self-contained nickel-cadmiumrechargeable battery supply, 3.6V nominal,600mAh capacity. Base : 9V DC 500mA MEMORYSpeed Dail: 20 Memory locations,20 digits per location. CID : Alpha Numeric Display 50 Memory locations...

Page 40 - TABLE OF CONTENTS

TABLE OF CONTENTS INTRODUCTION ......................................................................................................... 1Special Features ......................................................................................................... 2Parts Checklist .........................