VTech Telephone - Manuals

6 IN USE/LOW BATT LED • The IN USE/LOW BATT LED lights when the Handset is on an active call. • It flashes in cadence with an incomingring. • It flashes quickly during programmingmode. • It flashes slowly when battery is low. PHONE / FLASH KEY • Press the PHONE key to make a call. • If you are curre...

7 IN USE/CHARGING LED • The LED illuminates steadily when the Handset is in the Base cradle to indicatethat the Handset battery is being charged. • The LED illuminates whenever the Handset is being used. • This LED also flashes in cadence with the incoming ring. PAGE KEY • Press the PAGE key to page...

8 Making Calls • Pick up the Handset and press PHONE . • When you hear a dial tone, dial the number. • The IN USE LED will illuminate while the Handset is on a call. If you make a mistake when dialing, press OFF to hang up, then press PHONE to get the dial tone again. • You must always press PHONE b...

12 Taking Care Of Your Telephone Your t 2406 cordless telephone contains sophisticated electronic parts, so it must be treated with care. Avoid rough treatment Place the Handset down gently. Save the original packing materials to protect yourtelephone if you ever need to ship it. Avoid water Your te...

13 If you have difficulty operating your phone, the suggestions below should solve theproblem. If you still have difficulty after trying these suggestions, call VTechCommunications at 1-800-595-9511. In Canada, call VTech Electronics at 1-800-267-7377. The Phone Doesn't Work At All • Make sure the P...

14 Common Cure For Electronic Equipment If the unit does not seem to be responding normally, then try putting the Handset inthe cradle. If it does not seem to respond, do the following(in the order listed) :1. Disconnect the power to the Base.2. Disconnect the Handset battery.3. Wait a few minutes.4...

15 What does this limited warranty cover? • The manufacturer of this VTech product, VTech Communications , warrants to the holder of a valid proof of purchase (“Consumer” or “you”) that the productand all accessories provided by VTech in the sales package (“Product”) are free from material defects i...

16 5. Product whose warranty/quality stickers, Product serial numbers plates or electronic serial numbers have been removed, altered or rendered illegible; or 6. Product purchased, used, serviced, or shipped for repair from outside the United States, or used for commercial or institutional purposes ...

18 This equipment complies with Parts 15 of the Federal Communications Commission (FCC)rules for the United States. It also complies with regulations RSS210 and CS-03 ofIndustry and Science Canada. Operation is subject to the following two conditions:(1) this device may not cause interference, and (...

21 Before installing this equipment, users should ensure that it is permissible to beconnected to the facilities of the local telecommunications company. The equipmentmust also be installed using an acceptable method of connection. The customer shouldbe aware that compliance with the above condition...

22 FREQUENCY CONTROL Crystal controlledPLL synthesizer TRANSMIT FREQUENCY Base: 2410.2-2418.9 MHz Handset: 912.75-917.10 MHz RECEIVE FREQUENCY Base: 912.75-917.10 MHz Handset: 2410.2-2418.9 MHz CHANNELS 30 Channels NOMINAL EFFECTIVE RANGE Maximum power allowed by FCC and IC.A c t u a l o p e r a t i...

USER'S MANUAL VTECH TELECOMMUNICATIONS LTD. www.vtechphones.com UNIQUE STAND UP DESIGN 2406 ANY KEY ANSWER 30 CHANNEL OPERATION