VTech ia5847 - Manuals

www.vtechphones.com Connect power and telephone lne cords Installaton Standard electrical outlet Modular telephone jack Install the telephone base and the charger as shown below. Choose a central location within the home, away from any electronic equipment and appliances such as personal computers, ...

www.vtechphones.com G ett n g s ta rte d Installaton Choose locaton For maximum performance of your cordless telephone system: 1. Choose a central location for your telephone base. 2. Install your telephone base and extension handsets away from electronic equipment, such as personal computers, telev...

www.vtechphones.com Installaton Wall mountng bracket nstallaton (optional) Your telephone base comes with the wall mounting/desktop bracket installed, ready for desktop use. If you prefer to mount your telephone on the wall (optional), it is designed to mount on a standard telephone wall plate. For ...

www.vtechphones.com G ett n g s ta rte d Installaton Check for dal tone After the batteries are charged, pick up the handset and press TALK /FLASH ; you should hear a dial tone. If you do not, refer to the Troubleshootng section in the back of this user’s manual. Charge the handset battery If batter...

www.vtechphones.com • Press SELECT. The minute is flashing. Press or until the screen displays the correct minute. • Press SELECT. AM or PM is flashing. Press or to choose between AM or PM. Press SELECT. Handset rnger style/battery save You can select from four different handset ringer styles, or tu...

www.vtechphones.com G ett n g s ta rte d Installaton Belt clp (optional) To remove To attach

www.vtechphones.com Telephone operaton 1,2 3,4 8 7 9 10 5 6 Handset layout 1. TALK2. FLASH3. CHAN (channel)4. REMOVE5. Answer a call6. /CID VOL- /VOL+ 7. SELECT8. OFF9. REDIAL/PAUSE10. PROG (program)

www.vtechphones.com B as c o pe ra to n Telephone base layout 11. CHARGE/IN USE12. Message waiting indicator13. FIND HANDSET 11 12 13 Telephone operaton

www.vtechphones.com 0 Handset operaton Makng Calls • Press TALK /FLASH , then dial the number. — OR — Dial the number (press then press CHAN/REMOVE to backspace), then press TALK /FLASH . • To answer a call, press TALK /FLASH . • To end a call, press OFF . Endng calls • Press OFF to end your call. —...

www.vtechphones.com B as c o pe ra to n • While phone is not in use, press to display caller ID information.• While entering names or numbers into memory, press then press CHAN/REMOVE to delete last character entered. / VOL+ • While on a call, press to increase the volume. A double beep will sound w...

www.vtechphones.com Telephone operaton Telephone base operaton CHARGE/IN USE • Flashes slowly when the handset is in use. • Glows steadily when the handset is charging in its base. • Flashes in unison with an incoming call. Voce mal ndcator • If you subscribe to telephone company voice mail with a v...

www.vtechphones.com B as c o pe ra to n Language • Press PROG, then press or until LANGUAGE is displayed. Press SELECT. • The current setting blinks. Press or until the screen displays the correct language (English, Espanol, Francais). • Press SELECT to save your selection. Set dal mode If you have ...

www.vtechphones.com B as c o pe ra to n Telephone operaton Temporary tone dalng If you have pulse (rotary) dialing, you can change from dial pulse to touch tone dialing by pressing TONE * . This is useful if you need to send touch tone signals for access to telephone banking or long distance service...

www.vtechphones.com • For clearer reception while on a call, press the CHAN button until any interference is eliminated. • Turning off the voice mail indicator only turns off the NEW VOICEMAIL message on all handsets; it does not delete your voice mail message(s). Use this feature when the phone ind...

www.vtechphones.com B as c o pe ra to n Call transfer An external call can be forwarded from one handset (HS1) to the other handset (HS2) by following these steps: 1. While on a call, press SELECT on HS1 to forward the call to HS2. HS1 will show: HS2 will ring and show: 2. Press TALK /FLASH on HS2 t...

www.vtechphones.com Drectory • Press OFF at any time to exit the directory. • When the memory is full the screen will display MEMORY FULL , an error tone sounds and you will not be able to store a new number until you delete a stored number to make room for another entry. • If the directory is If th...

www.vtechphones.com B as c o pe ra to n Drectory SPEED EDIT ERASE8005959511 • When using the dial pad key(s) to search for a directory entry and there is not an entry for that letter, NO DATA will display on the handset. • Each handset directory is independent of the other handsets. If you make entr...

www.vtechphones.com 0 Drectory Erase a drectory entry 1. Press . The screen displays DIRECTORY . 2. Press or to scroll alphabetically through entries stored in directory. — OR — Press the dial pad key for the first letter of the entry you want to delete. 3. When the screen displays the entry you wan...

www.vtechphones.com B as c o pe ra to n 4. Press SELECT. The screen displays ENTER - . 5. Press the key (1-9) to move this entry from the normal directory to the speed dial memory and assign the memory location. You’ll hear a confirmation beep. A memory location number (1 through 9) will be displaye...

www.vtechphones.com Your phone can store up to nine telephone numbers with names (up to 15 characters and 24 digits in each location) into the speed dial memory locations you assign (1 through 9). You can also store telephone numbers with names alphabetically in the directory. See the Drectory secti...

www.vtechphones.com B as c o pe ra to n Speed dal 6. When you finish entering the name, press SELECT or PROG. The screen displays ENTER NUMBER. 7. Enter the telephone number. Press then press CHAN/REMOVE to backspace and make corrections. Press REDIAL/PAUSE to store pauses in the dialing sequence. -...

www.vtechphones.com Speed dal Delete a speed dal entry 1. Press and hold the speed dial location key (1 through 9) of the entry you wish to delete.2. When the screen displays the entry you want to delete, press SELECT . Then press or until ERASE flashes. 3. Press SELECT . The screen displays ERASE N...

www.vtechphones.com B as c o pe ra to n Your phone has a caller ID (CID) with call waiting feature that works with service from your local phone service provider. Caller ID with call waiting lets you see who’s calling before you answer the phone, even when you’re on another call. You may need to cha...

www.vtechphones.com Caller ID • If you answer a call before the information appears on the screen, it will not be in the call history. • Press OFF at any time to exit call history. About call hstory (caller ID) Your phone can store up to 45 calls in its caller ID (CID) memory. When the memory is ful...

www.vtechphones.com B as c o pe ra to n Caller ID Delete records from call hstory Delete a specific call 1. Locate the record you want to delete from call history. 2. Press the REMOVE key. You’ll hear a confirmation beep. Delete all calls 1. With the handset in idle (off) mode, press and hold the RE...

www.vtechphones.com Caller ID Screen displays: When: PRIVATE CALLER The other party is blocking name and/or number information. UNKNOWN CALLER Your phone company is unable to receive information about this caller’s name and/or number. * (after name) This caller has called you more than once. Dsplay ...

www.vtechphones.com B as c o pe ra to n Telephone operaton Dsplay screen messages Screen displays: When: ** RINGING ** There is a call coming in. CONNECTING... The handset is waiting for dial tone. PHONE ON The handset is in use. NEW VOICEMAIL You have been alerted by the telephone company that you ...

www.vtechphones.com 0 Battery nformaton • If you repeatedly get a low battery indicator, even after charging overnight, the battery should be replaced. • To reduce the risk of fire or injury to persons or damage to the telephone, read and follow these instructions carefully: Charge the battery provi...

www.vtechphones.com Addtonal nformat on Troubleshootng If you have difficulty operating your phone, the suggestions below should solve the problem. If you still have difficulty after trying these suggestions, call VTech Communications at 1-800-595-9511. In Canada, call VTech Telecommunications Canad...

www.vtechphones.com Addtonal nformat on Troubleshootng Problem Suggeston The CHARGE/IN USE Indicator on the telephone base is flashing • This is a signal that the battery is very low, completely depleted, or when there is no electrical contact between the battery and the telephone base. • Ensure the...

www.vtechphones.com Addtonal nformat on Troubleshootng Problem Suggeston There is noise or interference during a telephone conversation. My calls fade out or cut in and out when I am using the cordless handset. • The handset may be out of range. Move it closer to the telephone base. • Appliances or ...

www.vtechphones.com 0 Mantenance Taking care of your telephoneYour cordless telephone contains sophisticated electronic parts, so it must be treated with care.Avoid rough treatment Place the handset down gently. Save the original packing materials to protect your telephone if you ever need to ship i...

www.vtechphones.com Addtonal nformat on FCC, ACTA and IC regulatons FCC Part 15This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission (FCC) rules. These requirements are intended to provide reasonab...

www.vtechphones.com Index A About call history (caller ID) 25-28 Answering calls 10 B Battery information 30 Belt clip 7 C Caller ID 25-28 Call transfer 17 Charge the handset battery 5, 14 Check for dial tone 5, 14 Choose location 3 Clear voicemail alert 17 Connect power and telephone line cords 2 D...

User’s manual w w w . v t e c h p h o n e s . c o m Model: ia5847