VTech CS6429-4 - Manuals - manualsarea.com

Page 2 - Telephone base and charger installation; Battery installation; THIS SIDE UP; CHARGE; If you do not hear a dial tone:

2 Telephone base and charger installation Install the telephone base and charger as shown below. Telephone line cord Telephone base Charger Telephone base power adapter A DSL filter (not included) is required if you have DSL high-speed Internet service Electrical outlet not controlled by a wall swit...

Page 3 - Tabletop to wall mount installation; TEL LINE; Telephone base overview; Message window; Battery charging; NO BATTERY

3 Tabletop to wall mount installation The telephone comes ready for tabletop use. Follow the steps below to mount your telephone on a wall. Route the telephone line cord through the hole on the wall mount bracket and plug it into the telephone wall jack. Route the power cord out of the telephone bas...

Page 4 - Using the handset menu; MENU; Screen display; Telephone settings; Handset overview; TONE

4 Using the handset menu Press MENU when the phone is not in use. Press or until the screen displays the desired feature menu.Press SELECT to enter that menu. To return to the previous menu, press CANCEL . To return to idle mode, press and hold CANCEL . Telephone settings Default settings are indica...

Page 5 - the volume of the paging tone.; Telephone operation; MUTE

5 Ringer volume (handset) You can adjust the ringer volume level, or turn the ringer off. Press MENU when the handset is not in use. Scroll to >RINGERS then press SELECT twice. Press or to adjust the volume, then press SELECT to save. If the handset ringer volume is set to off, that handset is si...

Page 6 - Place the handset in the telephone base or charger.; Do not press and hold

6 Find handset Use this feature to find all system handsets. To start paging: Press /FIND HANDSET on the telephone base once and then release. All idle handsets ring and their screens show ** PAGING ** . To end paging: Press /FIND HANDSET again on the telephone base once and then release.Press , or ...

Page 7 - Call log

7 Directory The directory can store up to 50 entries and are shared by all system handsets. To add a directory entry: Press MENU/SELECT twice. Scroll to >ADD CONTACT then press SELECT . Use the dialing keys to enter the number (up to 30 digits). -OR- Copy a number from the redial list by pressing...

Page 8 - Number of rings; Answering system operation; Turn the answering system on or off; “Record after the tone. Press; Message playback at the telephone base; STOP; Delete all messages at the telephone base

8 To save a call log entry to the directory: When the desired call log entry displays, press SELECT . Use the dialing keys to modify the number, then press SELECT . Use the dialing keys to modify the name, then press SELECT to save. To delete one call log entry: When the desired call log entry displ...

Page 9 - Add and register a handset

9 Call screening at the telephone base If the answering system and call screening are on, the announcement and the incoming message broadcast at the telephone base when a call is answered by the answering system.Options while recording a message: Press VOL or VOL on the telephone base to adjust the ...

Page 10 - Troubleshooting; My telephone does not work at all.; LOW BATTERY; The display shows NO LINE. I cannot get a dial tone.; the cordless handset before dialing, or dial from; ANS ON; The answering system does not record messages.

0 Troubleshooting If you have difficulty with your telephone, please try the suggestions below. For customer service, visit our website at www.vtechphones.com or call (800) 595-95. In Canada, go to www.vtechcanada.com or call (800) 267-7377. My telephone does not work at all. Make sure the battery i...

Page 11 - Important safety instructions; SAVE THESE INSTRUCTIONS; Battery; Precautions for users of implanted cardiac pacemakers; About cordless telephones; Potential TV interference:; Rechargeable batteries:

Important safety instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following: Read and understand all instructions.Follow all warnings and instructions marked on the product.Unplug...

Page 12 - Nickel-metal hydride rechargeable batteries:; Operating range; FCC, ACTA and IC regulations

2 Nickel-metal hydride rechargeable batteries: Dispose of these batteries in a safe manner. Do not burn or puncture the battery. Like other batteries of this type, if burned or punctured, they could release caustic material which could cause injury. Operating range This cordless telephone operates w...

Page 13 - For C-UL compliance only; Mesures de sécurité importantes

3 FCC Part 68 and ACTA This equipment complies with Part 68 of the FCC rules and with technical requirements adopted by the Administrative Council for Terminal Attachments (ACTA). The label on the back or bottom of this equipment contains, among other things, a product identifier in the format US:AA...

Page 14 - Limited warranty

4 N’utilisez pas le téléphone pour rapporter une fuite de gaz à proximité de la fuite. En certaines circonstances, une flammèche pourrait être provoquée lorsque l’adaptateur est branché à une prise de courant, ou lorsque le combiné est déposé sur le socle. Ceci est un événement commun associé à la f...

Page 15 - What is not covered by this limited warranty?; How do you get warranty service?; What must you return with the Product to get warranty service?; Please retain your original sales receipt as proof of purchase.

5 What is not covered by this limited warranty? This limited warranty does not cover:. Product that has been subjected to misuse, accident, shipping or other physical damage, improper installation, abnormal operation or handling, neglect, inundation, fire, water or other liquid intrusion; or 2. Prod...

Page 16 - Technical specifications; A member of THE VTECH GROUP OF COMPANIES.

6 Technical specifications Transmit frequency Handset: 92.536-928.448 MHzTelephone base: 92.536-928.448 MHz Channels 5 Nominal effective range Maximum power allowed by FCC and IC. Actual operating range may vary according to environment conditions at the time of use. Power requirements Handset: 2.4V...