Viper VIPER4706V - Manuals

5 © 2013 Directed. All rights reserved. At a Glance 5 Keys to using this manual Specific actions (in bold type) and style conventions are used consis-tently throughout this manual, they are as follows: • Press: implies pushing in and releasing a button. • Hold: is used after Press actions when a butt...

6 © 2013 Directed. All rights reserved. 6 Remote Control Information Feature Description Internal Antenna Used for transmitting and receiving information Display Status screen - the upper portion of the display contains status icons for the System, Remote Start and Remote Control. Text field - the l...

7 © 2013 Directed. All rights reserved. At a Glance 7 Control Center Control Center LED Button The Control Center, typically located on the upper part of the front windshield sends and receives commands or messages to and from your system. It consists of: • The In-vehicle system antenna, for 2 way c...

8 © 2013 Directed. All rights reserved. Status Screen Icons 1 ALL Text Field Status Screen Icons The table below describes all the status screen icons. Icon Description System Status Locked: The system is locked. Locked: The system is Locked in Valet. Unlocked: The system is Unlocked. Unlocked: The ...

11 © 2013 Directed. All rights reserved. Commands 11 Using your System Commands and Confirmations Commands, Basic or Advanced, are used to activate system features and are performed by pressing one of the Command buttons. Basic commands control the most often used and remote start features while Adva...

12 © 2013 Directed. All rights reserved. 12 Responder LC Command table Button Level Direct Access x 1 LEVEL 1 x 2 LEVEL 2 x 3 LEVEL 3 x 4 LEVEL 4 Lock (Panic) Silent Lock UnLock Silent UnLock Remote Valet Car Finder Remote Start Runtime Reset Timer Start Smart Start Defogger A U X Aux/Trunk AUX 1 AU...

13 © 2013 Directed. All rights reserved. Commands 13 Basic commands (Direct Access) Lock Press and release The doors lock and the horn honks (if connected) and parking lights flash once. The LOCKED text and beeps play to confirm and the System Status Icons update. If Valet mode* is On the doors lock a...

14 © 2013 Directed. All rights reserved. 14 AUX/Trunk Press and hold AUX The Trunk opens (if connected) when this button is pressed for 2 sec-onds. The TRUNK text and tones play to confirm. Remote Start Press and release Activates (or if On, deactivates) the remote starter. The engine and parking lig...

15 © 2013 Directed. All rights reserved. Commands 15 Advanced commands: (Level 1) Press and release the button 1 time first, before pressing one of the following commands. Silent Lock Press and release The doors lock (if connected), and the parking lights flash once. The SILENT LOCKED text plays to co...

16 © 2013 Directed. All rights reserved. 16 will reset the runtime counter to the pre-programmed setting. The RUNTIME text and tones play to confirm. The text field will update if set to display runtime. Note Remote Start must be On to use this feature. Temp Request Press and hold the button Requests ...

17 © 2013 Directed. All rights reserved. Commands 17 Advanced commands: (Level 2) Press and release the button 2 times first, before pressing one of the following commands. Remote Valet Press and release Enters (or if On, exits) Valet Mode. The VALET text and beeps (1 for On, 2 for Off) play to confir...

18 © 2013 Directed. All rights reserved. 18 Runtime Remaining Press and hold the button Requests the remaining Remote start runtime and temporarily displays it in the text field. Note Remote Start must be On to use this feature. * See”Remote and System Operations” on page 35 for details.

19 © 2013 Directed. All rights reserved. Commands 19 Advanced commands: (Level 3) Press and release the button 3 times first, before pressing one of the following commands. Car finder Press and release The horn emits one long honk and the parking lights flash for 10 seconds. The CAR FINDER text and bee...

20 © 2013 Directed. All rights reserved. 20 Advanced commands: (Level 4) Press and release the button 4 times first, before pressing one of the following commands. AUX 4 Press and release AUX Activates (or if On, deactivates) the Aux 4 output. The AUX CHANNEL text and On tones or Off tones play to co...

21 © 2013 Directed. All rights reserved. Configurations 21 Responder LC configuration Operations of the Responder LC and how it communicates messages are set in the configuration Main Menu. Navigating menus and options Navigating menus and features, changing options, and exiting are performed using th...

22 © 2013 Directed. All rights reserved. 22 Main Menu The following Main Menu list of features is available for configuration of the remote control. Setup Remote menu: Keypad Lock Options: OFF , AUTO When OFF , the buttons do not lock and always perform a com- mand when pressed. When set to AUTO , th...

23 © 2013 Directed. All rights reserved. Configurations 23 Off after one week, if the remote control is not used during this period. Just press any button to resume system monitoring. When set to ON it wakes up every few seconds to listen for pages from the system. When set to OFF it does not wake u...

25 © 2013 Directed. All rights reserved. Configurations 25 Button Beep Options: ON , OFF When set to ON , the remote will emit a beep as confirmation of a button press. When set to OFF , beeps are not emitted for button presses. System Type Options: SEC , RKE Selects the type of system, namely; Sec u...

26 © 2013 Directed. All rights reserved. Pair Remote Remote pairing is a process where the Responder LC remote, and the in-vehicle system learn the other’s encrypted identification, securing communication between the two from intruders. Note: Remotes are pre-programmed from the factory. Prepare the v...

28 © 2013 Directed. All rights reserved. System Features Factory Alarm Trigger Notification: This system has an optional input that can be connected to the horn circuit. If the vehicle has a factory alarm controlled by the lock/un lock keyless entry system, the remote reports when the factory alarm i...

29 © 2013 Directed. All rights reserved. Feature Details 29 Remote Start Features Key Takeover When you are ready to driveThe system keeps the engine running until the vehicle is ready to be driven. To perform Key Takeover:1. Unlock the system and enter the vehicle, do not step on the foot brake. 2....

30 © 2013 Directed. All rights reserved. 30 Precautions for the Advanced Start features: • Park the vehicle in a well ventilated area away from windows and doors that lead into inhabited spaces. • Lock the vehicle, the engine will not start unless the doors are locked. • Only one Advanced start feat...

31 © 2013 Directed. All rights reserved. Feature Details 31 Note The temperature and battery thresholds can be changed by an authorized Directed dealer if a higher or lower threshold is desired. Temperature Reporting During Remote start the vehicle interior is checked regularly for tem-perature chan...

32 © 2013 Directed. All rights reserved. 32 continues running for the programmed runtime. 4. Exit the vehicle and Lock the system. Note For Pit Stop on manual transmission vehicles follow the di-rections in the “Manual Transmission Start (MTS mode)” on page 32 section with the door open. Manual Tran...

33 © 2013 Directed. All rights reserved. Feature Details 33 7. The engine turns off and after a few seconds, the REMOTE START OFF message plays to confirm. If the door is opened in Step 3 then the engine continues to run. Turbo Timer Mode The system keeps the engine running for the Turbo Timer runtim...

35 © 2013 Directed. All rights reserved. Feature Details 35 Remote and System Operations Passive Locking* Park and exit the vehicle, after the doors are closed the Passive Lock-ing countdown begins. The led flashes quickly and upon reaching 20 seconds the horn honks once. At 30 seconds the system Loc...

36 © 2013 Directed. All rights reserved. 36 Valet Mode Valet mode can be entered and exited by performing the Remote Valet command or manually using the vehicle key and the control button. When entered, the optional Failsafe Starter Kill is defeated while the convenience features still operate norma...

37 © 2013 Directed. All rights reserved. Feature Details 37 Out of Range Each time a command is performed the remote will expect a com-mand confirmation from the system. If a command confirmation is not received the out-of-range icon ( ) and a fault tone will play as an alert. No Remote Output Occasio...

1-way Companion Remote Control Button Level Direct Access x 1 LEVEL 1 x 2 LEVEL 2 x 3 LEVEL 3 x 4 LEVEL 4 Lock (Panic) Silent Lock Unlock Silent Unlock Remote Valet Car Finder Remote Start Runtime Reset Timer Start Smart Start Defogger A U X Aux/Trunk AUX 1 AUX 2 AUX 3 AUX 4 Not Used Used to access ...

39 © 2013 Directed. All rights reserved. 1-W ay 39 Button Auto Lock When On, the remote control buttons lock if more than 20 seconds lapses between button presses. If a button is pressed when locked, a fault tone is emitted. To unlock the buttons; press the button followed by the button, the buttons...

41 © 2013 Directed. All rights reserved. System Expansion Options Controlling two vehicles (Car Select) The Responder LC and 1way companion remote can control systems in two different vehicles saving the need for multiple remote controls. This feature also allows for customized system configurations ...

42 © 2013 Directed. All rights reserved. 42 Auxiliary Channels The Auxiliary Channel outputs of this system can activate many of the convenience features found in today’s vehicles. Once a command is performed to activate a convenience feature the Responder LC dis-plays text that matches the feature....

43 © 2013 Directed. All rights reserved. Batter y 43 Battery Information (Responder LC) The Responder LC remote control is powered by an internal recharge-able battery that can be serviced only through an authorized Directed Electronics dealer. The information and precautions in this section can hel...

44 © 2013 Directed. All rights reserved. 44 Low Battery Alerts When Unlocking the system using a remote with a low battery the horn will emit one additional horn honk as an alert. If confirmation honks are programmed off, the system will still emit one honk as an alert when Unlocking. After performin...

45 © 2013 Directed. All rights reserved. Batter y 45 Battery Information (1-Way) The 1- way companion remote is powered by one 3V coin cell lithium battery (P/N CR-2032) that will last approximately one year under normal use. Battery Replacement 1. If present, remove the small screw on the back of t...

46 © 2013 Directed. All rights reserved. 46 Glossary of Terms Document Terminology Control Module The “brain” of your system. Usually hidden underneath the dash area of the vehicle. It houses the microprocessor which monitors your vehicle and controls all of the system’s functions. Responder LC (2-w...

47 © 2013 Directed. All rights reserved. Patent Information This product is covered by one or more of the following United States patents: Remote Start Patents: 5,349,931; 5,872,519; 5,914,667; 5,952,933; 5,945,936; 5,990,786; 6,028,372; 6,467,448; 6,561,151; 7,191,053; 7,483,783 Vehicle Security Pa...

49 © 2013 Directed. All rights reserved. Safety 49 Control Center To satisfy FCC RF exposure compliance requirements, the device and its an-tenna must maintain a separation distance of 20 cm or more from the person’s body, except for the hand and wrists, to satisfy RF exposure compliance. This devic...

50 © 2013 Directed. All rights reserved. 50 Warning! Safety First Please read the safety warnings below before proceeding. Improper use of the product may be dangerous or illegal. Installation Due to the complexity of this system, installation of this product must only be performed by an authorized ...

53 © 2013 Directed. All rights reserved. Safety 53 Limited lifetime consumer warranty Directed Electronics. (“Directed”) promises to the original purchaser to repair or replace (at Directed’s election) with a comparable reconditioned model any Directed unit (hereaf-ter the “unit”), excluding without...