Viper VE 17DSP-EU - Manuals

Page 2 - TABLE OF CONTENTS

USER MANUAL ENGLISH TABLE OF CONTENTS INTRODUCTION .............................................................................................................................................................. 2 MANUAL PURPOSE AND CONTENTS ...............................................................

Page 3 - INTRODUCTION

ENGLISH USER MANUAL INTRODUCTION NOTE The numbers in brackets refer to the components shown in Machine Description chapter. MANUAL PURPOSE AND CONTENTS The purpose of this Manual is to provide the operator with all necessary information to use the machine properly, in a safe and autonomous way. It c...

Page 4 - CHANGES AND IMPROVEMENTS; OPERATION CAPABILITIES; SAFETY; SYMBOLS

USER MANUAL ENGLISH CHANGES AND IMPROVEMENTS VIPER constantly improves its products and reserves the right to make changes and improvements at its discretion without being obliged to apply such bene fi ts to the machines that were previously sold. Any change and/or addition of accessories must be ap...

Page 5 - GENERAL INSTRUCTIONS

ENGLISH USER MANUAL GENERAL INSTRUCTIONS Speci fi c warnings and cautions to inform about potential damages to people and machine are shown below. DANGER! – Always disconnect the power supply cable when the machine is not in use, before performing maintenance procedures, before replacing the brush/p...

Page 7 - MACHINE DESCRIPTION; MACHINE STRUCTURE; Handle

ENGLISH USER MANUAL MACHINE DESCRIPTION MACHINE STRUCTURE 1. Guide Handle 2. Switch Lever, Right 3. Adjustment Lever 4. Shaft 5. Cord Wrap 6. Switch Plug (VE17P-EU 、 VE17HDP- EU 、 VE17HSP-EU), Switch(H/L speed) (VE17DSP-EU) 7. Wheel 8. Barb Hose 9. Bumper 10. Mainframe 11. Motor Cover 12. Power Cord...

Page 8 - TECHNICAL DATA; Model

USER MANUAL ENGLISH TECHNICAL DATA Model VE17P-EU VE17HDP-EU VE17DSP-EU VE17HSP-EU Voltage 220 – 240 V 220 – 240 V 220 – 240 V 220 – 240 V Power 750 W 1120 W 1125 W/1500 W 1500 W Current 4.6 A 7 A 7.2 A/9.5 A 9.8 A Frequency 50-60 Hz 50-60 Hz 50-60 Hz 50-60 Hz Brush Speed 150 rpm 150 rpm 150 / 300 r...

Page 9 - WIRING DIAGRAM FOR; ENGLISH; Motor

ENGLISH USER MANUAL WIRING DIAGRAM FOR VE17P-EU VE17HDP-EU VE17HSP-EU WIRING DIAGRAM FOR VE17DSP-EU 8 VE17P-EU VE17HDP-EU VE17DSP-EU VE17HSP-EU VF72309 (1)2009-12 ENGLISH Motor Motor

Page 10 - BEFORE STARTING THE MACHINE; ASSEMBLY; ] Wheel the cleaner to where it is needed.; OPERATION OF THE MACHINE; BASIC OPERATION; *Be sure the machine is not plugged into an outlet.; over the gearbox hub and turning the driver / brush 1/4 turn.

USER MANUAL ENGLISH BEFORE STARTING THE MACHINE ASSEMBLY For transport reasons the motor head and shaft are supplied not assembled. 1] Insert the gear index housing (1) into the “U” shape bracket (2). 2] Align the holes of the gear index housing and the “U” shape bracket. 3]Insert the socket screws ...

Page 11 - make the machine go left, gently lower the handle.; MAINTENANCE

ENGLISH USER MANUAL 8] Select either low speed {150 rpm} or high speed {300 rpm} by pushing the motor mounted switch (1) into the low or high position.(Only for VE17DS) * Never change the speed while operating the machine. Be sure the power is turned off prior to changing the speed. 9] When the mach...