Vermont Casting 4322 - Manuals

2 2003144 Ash Door You may find it helpful to remove the ashpan bracket from the inside ashdoor; use a 7/16” wrench for this. Remove the old gasket and clean the gasket channel thoroughly. Clean the ash door and mating edges of the ash drop. Cut the required length of 3/8” diameter gasket plus one in...

3 2003144 paper all around the perimeter of the damper opening. With the damper closed and locked, it should not be possible to pull the papers out without resistance. The more easily the paper pulls out, the less secure the seal is at that spot.1. To adjust the damper seal, loosen the locking hex n...

4 2003144 on access, inspection, evaluation and replacement if needed. 11. Work in reverse order to replace parts once the gas- ket cement has dried on the upper fireback assem-bly. Be sure to install the spacer on the left end of the damper rod before installing the upper fireback assembly. 12. Insta...