Page 2 - IMPORTANT SAFETY INFORMATION
2 2 IMPORTANT SAFETY INFORMATION Be sure to read and understand all WARNINGS and CAUTIONS before using this product. Please read this guide carefully before use to ensure optimum performance and avoid damage to the system or items that you are using it with. Failure to follow instructions may cause ...
Page 3 - CONTENTS
3 internal battery. For immediate use, attach the DC adapter and operate the appliances from an external 12 volt DC source. 4. To avoid over-inflation, carefully follow instructions on articles to be inflated. 5. Never leave appliances unattended while in use. Allow appliance to cool for five minute...
Page 4 - INTRODUCTION; Congratulations on selecting the Vector Air ProTM Model VEC255; FIGURE 1
4 4 1. INTRODUCTION Congratulations on selecting the Vector Air Pro™ Model VEC255 Compressor & Inflator Combo. This system is an advanced high-pressure (up to 260 PSI) multi-use air compressor system with unique features that set it far above the value and utility of ordinar y compressors for mo...
Page 5 - ADDITIONAL KEY FEATURES; FIGURE 2
5 NOZZLE HATCH COVER NOZZLES PRESSURE GAUGE The Compressor On/Off Switch controls operation of the compressor. It conveniently is depressed and released to control inflation. An exact pres- sure is obtained by obser ving the gauge and releasing the trigger when the correct pressure is achieved. For ...
Page 6 - POWERING FROM THE BATTERY PACK
6 6 3. ATTACHING THE COMPRESSOR’S AIR HOSE The Air Hose is supplied as a separate item from the compressor body. The hose has a ribbed brass fitting at one end and a standard tire chuck at the other end. To use the hose it must first be connected to the compressor outlet. Loosen the Hose retaining r...
Page 7 - FIGURE 3; CHARGING/RECHARGING THE BATTERY PACK; AC RECHARGE OF BATTERY PACK
7 The DC Power Adapter has a fused DC plug and connecting cord stored inside the DC Power Adapter. To use the DC Power Adapter, first remove the DC plug from it’s storage in the adapter. Deploy the cord from storage, and connect the DC Power Adapter to the compressor. Make sure it snaps into positio...
Page 8 - FIGURE 4; COMPRESSOR/TIRE INFLATOR; TIRE INFLATION OR PRODUCTS WITH A VALVE STEM
8 8 FIGURE 4 To remove the batter y pack from the appliance body for charging: Make sure the trigger switch is OFF. Press both battery pack release buttons at the same time. Pull the battery pack down away from the appliance body. Insert the barrel connector of the AC Adapter into the batter y pack’...
Page 10 - TYPICAL INFLATION TIMES FOR COMPRESSOR USE; Always follow tire manufacturers recommendations for; LOW PRESSURE INFLATOR/DEFLATOR; during nozzle changes
10 10 7. TYPICAL INFLATION TIMES FOR COMPRESSOR USE The following are approximate pressure and inflation times for various items. WARNING: Always follow tire manufacturers recommendations for pressure on item to be inflated. VEHICLE AND TRAILER TIRES TIRE SIZE ................... PRESSURE .............
Page 11 - MAINTENANCE/REPLACEMENT PARTS
11 8.1 INFLATING 1. Connect the inflator/deflator to either the batter y pack or the DC Power Adapter. 2. Be sure the appropriate nozzle head is attached to the tapered inflating port of the inflator/deflator unit. Push the nozzle onto the inflation por t to attach. The inflating port can be identif...
Page 12 - BATTERY DISPOSAL; in fines, or imprisonment; SPECIFICATIONS
12 12 ALWAYS RECYCLE PRBA PRBA 11. BATTERY DISPOSAL Contains a maintenance-free, sealed, non-spillable, lead acid batter y, which must be disposed of properly. Most states require recycling-contact your local municipal authority for information.Non-spillable sealed lead-acid batter y, must be recycl...
Page 13 - 20 DAY LIMITED WARRANTY REGISTRATION FORM; The following situations are not covered under this warranty:
13 120 DAY LIMITED WARRANTY REGISTRATION FORM This Vector Manufacturing, Ltd. product is warranted to the original purchaser only for 120 days from the date of purchase, to be free of defects in materials and workmanship. Vector Manufacturing, Ltd. disclaims any liability for consequential damages. ...
Page 14 - YEAR EXTENDED WARRANTY REGISTRATION FORM
14 14 3 YEAR EXTENDED WARRANTY REGISTRATION FORM This limited warranty program is the only one that applies to this product, and it sets forth all the responsibili-ties of Vector Manufacturing, Ltd., regarding this product. There is no other warranty, other than those de-scribed herein. This Vector ...