Vector VEC012AP - Manuals - manualsarea.com

Page 2 - WARRANTY INFORMATION

Cut here ✄ VEC012AP OWNER’S MANUAL & WARRANTY INFORMATION THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING SAFETY, OPERATION, MAINTENANCEAND STORAGE OF THIS PRODUCT. BEFORE USING, READ AND UNDERSTAND ALL CAUTIONS, WARNINGS, INSTRUCTIONS AND PRODUCT LABELS, PLUS YOUR VEHICLE’S BATTERY MANUFAC...

Page 3 - CONTENTS

1 CONTENTS 1. INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5 2. USING VECTOR JUMPER AS A JUMP-START SYSTEM . . . . . . . . . 6 2.1 Easy, Step-by-Step Jump-starting Instructions . . . . . . . . . . . . . 7 3. CHARGING/RECHARGING . . . . . . . . . . . . . . . . . ...

Page 4 - Safety information; is available in case of accident or emergency.; FIRST AID

2 Safety information WARNING: (Warning statements identify conditions or practices that may result in personalinjury or loss of life) 1) When working with lead acid batteries, always make sure immediate assitance is available in case of accident or emergency. 2) Always use protective eyewear when us...

Page 5 - systems. Do not connect to a 6 Volt or 24 Volt battery system.

3 CAUTION: Caution statements advise against certain conditions and practices that mayresult in damage to vehicles, appliances and/or the jump-starter. IMPORTANT: Although this unit is delivered in a partially charged state, you must fully charge itwith the supplied 110/120 Volt AC charger for a ful...

Page 6 - INTRODUCTION; Congratulations on selecting the VECTOR; Jump-start any engine system with a standard 12 Volt DC battery:

4 INTRODUCTION Congratulations on selecting the VECTOR ® JUMP-STARTER and 12 VOLT DC POWER SUPPLY. This compact jump-starter is unique in the amount of energy it can supply forits size. The internal battery is a high density sealed, lead-acid battery that stores anddelivers energy comparable to full...

Page 7 - ADDITIONAL FEATURES; Automatic taper charge for AC recharge

5 FIGURE 1A (Front View) FIGURE 1B (Rear View) 1. Reverse connection indicator2. Good connection indicator3. 12 Volt DC Accessory Socket with 20 amp overload protection4. Battery Level Push Button5. LED Charging/Battery Level Indicators 6. Heavy-Duty Welding Quality Jumper Cables7. Heavy-Duty 450 Am...

Page 8 - USE AS A JUMP-START SYSTEM; working on a vehicle’s battery system.

6 USE AS A JUMP-START SYSTEM WARNING: 1. Before using this system to jump-start any vehicle or boat, read and understand all instructions, safety tips, warnings, cautions and first aid information pro-vided in this manual and on the product labeling. Additional important infor-mation may also be pro...

Page 9 - BATTERY TERMINAL IS CONNECTED TO CHASSIS).

7 2.1 EASY, STEP-BY-STEP JUMP-STARTING INSTRUCTIONS This jump-starter is equipped with an automatic ON/OFF that only allows jump-start energy to flow when proper connections are made to battery and frame. Theautomatic ON/OFF works in conjunction with an audible reverse polarity alarmand a large red ...

Page 11 - Use Recharges; OPERATION AS A 12 VOLT PORTABLE POWER SUPPLY; Appliance

9 WARNING: Do not recharge for more than 3-4 hours maximum using 12 Volt DC method 3.2 12 Volt DC Charging 1. Insert one end of the DC/DC charging adapter into the 12 Volt DC accessory receptacle on the vehicle or boat. 2. Insert the plug at the other end of this charging adapter into recharging por...

Page 12 - • Do not expose battery to fire or intense heat as it may explode; SPECIFICATIONS

10 5. EMERGENCY WORKLIGHT The Worklight is controlled by an On/Off switch. Make sure the lamp is turned OFFwhen the unit is being recharged or stored. 6. REPLACEMENT PARTS For replacement parts (bulbs, batteries, fuses, etc.), contact Vector CustomerService: (954) 584-4446 or toll-free (866) 584-550...