VDO HC12 6 - Manuals

P15 Press MODE 1 3sec.to start Press MODE13 sec. to endafter you setthe odometer Set ODOMETER Press MODE 2 to increase Press MODE 1 to switch •••••••••• • • • • • • •

P16 Press any button BIKE CHECK disappears The service icon will remain flashing. Another 50 km/35 mi. Then the service interval icon will also disappear BIKE CHECK

P18 Press MODE1 3sec. Press MODE1 to set Low Limit Low-limit High-limit Set limits Press MODE 2 to increase Press MODE1 to end Press MODE 2 to decrease

OWNER'S MANUAL - VDO HC 12.6 Index Preface1. Mounting 4.3 Entering time / clock 1.1 Handlebar holder 4.4 The NAVIGATOR 1.2 Speed transmitter (sensor) 4.4.1 Presetting the NAVIGATOR 1.3 Spoke magnet 4.4.2 Resetting the NAVIGATOR to zero 1.4 Twist-Click mounting of computer 4.5 Presetting the odometer...

Preface Thank you very much for buying a VDO HC 12.6 bicycle computer featuring heart rate / pulse functions. The more familiar you get with this model,the more enjoyable your trips are going to be.Hence, our urgent request:Please read thoroughly all the information provided in this manual. You are ...

1.4 Twist-Click mounting of computer on to holder The Twist-Click mounting has been exclusively developed for the new line of VDO computers. The VDO HC 12.6 also features the Twist-Click-System.The computerhead is put onto the handlebar and by a right turn of the computerhead (TWIST) fixed to the ho...

2.1 Interrogating information With the MODE1 key you call up following information: TRIP DIST/ RIDE TIME/ AVG SPEED/ MAX SPEED TRIP DIST trip counter for your individual trip, counting to 999.99 KM or M RIDE TIME trip timer featuring automatic start/stop function up to 19:59:59 h AVG SPEED average s...

2.2 Calling up set-up modes The MODE 1 key calls up any set-up modeCalling up the set-up modes requires a 3 sec pressing of the MODE 1 key. Set-up modes can be entered from various information displays: You want to set up: Display Information needed Wheelsize 1 or Wheelsize 2 TRIP DIST Clock CLOCK O...

2.4 Resetting of information modes to zero By pressing MODE 2 for 5 sec. any of the following information is simultaneously reset to zero 2.4.1. Cycling Information Get any of these informations in displayTRIP DIST--RIDE TIME--AVG SPEED--MAX SPEEDPress MODE 2 for 5 sec. to reset all of above informa...

4.2.3 Entering the precise wheelsize Step 1: By pressing MODE 1 call TRIP DIST in your display.Step 2: Press MODE 1 for 3 sec. In the upper part of the display you see "WS1" and "KMH" or "MPH" flashing. The lower part of the display alternately shows "ENTER MTRIC SYSTM...

4.4 The NAVIGATOR The NAVIGATOR is a second, individual trip distance counter that can be:• manually reset to zero• preset to a certain value, the trip distance is then counted from this value. The NAVIGATOR is very helpful following road book instructions or tour suggestions of bike magazines. For ...

GB HC 12.6 12 7. Pulse information of your VDO HC 12.6 Your VDO HC 12.6 permanentely displays following pulse / heart rate information:• Actual pulse / heart rate• Lower limit LO• Upper limit HI• Heart icon to indicate receiption of signals• Audible alarm / beeper (if activated) Information that is ...

9. Setting of pulse limits With your VDO HC 12.6 you determine upper and lower limits for your pulse / heart rate to define your training zone. During initial setup or when the AC-button at the rear of the housing has been pressed, following values apply by default:• Lower limit LO 80• Upper limit H...