US Stove Company EC95 - Manuals

Page 2 - These instructions comply with the applicable; HOW THIS HEATER OPERATES

2 EC95 SELECTING A LOCATION FOR THE HEATER When selecting a location for the heater, be sure attention is given to the following considerations:1. If the heater is to be vented into a Listed High Temperature Type HT Factory-Built Residential Type And Building Heating Appliance Chimney, review the in...

Page 4 - FLOOR PROTECTION; FIGURE 6 - RISE OF HORIZONTAL; FIGURE 5 - FLOOR PROTECTION; CHIMNEY CONNECTOR AND CHIMNEYS; he Chimney connector (pipe from heater to chimney) must be

4 EC95 FLOOR PROTECTION PIPE ANGLE UP HORIZONTAL TO HEATER FIGURE 6 - RISE OF HORIZONTAL CHIMNEY CONNECTOR PIPE TO CHIMNEY RISE:1/4" FOR EACH FOOTOF CONNECTORLENGTH FIGURE 5 - FLOOR PROTECTION This heater has been designed to prevent excessive temperatures on the floor beneath the heater. It is ...

Page 8 - required; HEATER INSTALLATION; MINIMUM CLEARANCE TO COMBUSTIBLE WALLS AND CEILINGS

8 EC95 FIGURE 8 - CONNECTING HEATER’S CHIMNEY CONNECTOR TO MASONRY CHIMNEY WHEN CHIMNEY CON-NECTOR DOES NOT HAVE TO PASS THROUGH A COMBUSTIBLE WALL HEATER INSPECTION Before installing the heater, inspect the heater for external damage and missing parts. Check the gaskets around thedoors to assure th...

Page 9 - TO SAFELY AND PROPERLY INSTALL THIS HEATER:

EC95 9 Two common types of clearance reductions systems use sheet metal with a thickness of 28 gauge (galvanized steel, aluminum,copper) or a 3-1/2 inch (4 inch thick nominal) thick masonry wall. Either of these materials must be spaced out 1 inch from thecombustible surfaces. With sheet metal, nonc...

Page 10 - FIGURE 9 - HEATER OPERATION INFORMATION; HEATER OPERATION; TO BUILD A FIRE

10 EC95 FIGURE 9 - HEATER OPERATION INFORMATION HEATER OPERATION IMPORTANT: DO NOT USE THE HEATER UNTIL A PROFESSIONAL INSPECTION HAS BEEN MADE OF THE ENTIRE INSTALLATION BY YOUR LOCAL FIRE DEPARTMENT, FIRE MARSHAL OR BUILDING CODE INSPEC-TOR. INSTALL A SMOKE DETECTOR ON EACH FLOOR OF YOUR HOME; IN ...

Page 16 - DONT’S; Don’t dry clothing or other articles on or near the heater.; SAFETY NOTICE; BAROMETRIC DRAFT REGULATOR; Model DR6; WARRANTY CLAIM INFORMATION AND REPAIR PARTS; Model Number of Heater

16 EC95 DONT’S 1. Don’t dry clothing or other articles on or near the heater. 2. Don’t store or place flammable liquids, gases, or other pressurized containers near the heater. 3. Don’t use gasoline, gasoline type lantern fuel, kerosene, charcoal lighter fluid, or similar liquids to start or intensi...

Page 18 - SEE FIGURE 12 FOR ILLUSTRATION OF PARTS; SAVE THIS MANUAL FOR FUTURE REFERENCE

18 EC95 SEE FIGURE 12 FOR ILLUSTRATION OF PARTS CUSTOMER NOTE: IN ADDI-TION TO THE REPAIR PARTS,K I T S I N C L U D E A N Y R E -P L A C E M E N T F A S T E N E R SWHICH WILL MOST LIKELY BENEEDED TO INSTALL THEREPAIR PART. SAVE THIS MANUAL FOR FUTURE REFERENCE KEY QTY. EC95 NO. PART NAME Per Unit PA...

Page 19 - INSTRUCTION MANUAL ADDENDUM; material is at least

EC95 19 INSTRUCTION MANUAL ADDENDUM This addendum is a supplement to the Installation, Operation, and Maintenance Instruction Manual for this appliance.Do not neglect to read all instructions thoroughly. ATTENTION: Installers of Fireplaces, Fireplace Stoves, Room Heaters, and Fireplace Inserts. SUBJ...